raspberry pi version

[pabloandresm]

Very nice investigation and code.

It is a shame that there is no C or Python code for Raspberry Pi. If yould be a very nice too have.

thanks

[cpetrich]

ok, point taken...

[hurra]

You probably can check the serial number with

hexdump -v -e '7/1 "%02x-" 1/1 "%02x" "\n"' /sys/devices/w1_bus_master1/<family-id>/id

[leahneukirchen]

For the Raspberry Pi Pico, you can use the following CircuitPython script:

import board
from adafruit_onewire.bus import OneWireBus
ow_bus = OneWireBus(board.GP16)
print('-'.join(["%02x" % i for i in devices[0].rom]))

[scruss]

And this in MicroPython for the Raspberry Pi Pico/RP2040, assuming pin 16 as above:

# print hex IDs of all ds18x20 sensors found on a pin
from machine import Pin
from onewire import OneWire
from ds18x20 import DS18X20

ds = DS18X20(OneWire(Pin(16)))

for i, sensor in enumerate(ds.scan()):
    print(i, ":", '-'.join(["%02x" % j for j in sensor]))

Other implementations might use something like Pin('PE0') to define a pin.

[cpetrich]

I've copied a Python code fragment in issue #20 (comment)
That could be used as a basis for porting the arduino code to Python.