ImageShare is built to run as a multi-container Docker application, using Nginx as the reverse proxy web server, Node as the application server, and Let's Encrypt Certbot for obtaining an SSL certificate. The custom Ngix configuration and Certbot allows ImageShare to load over both HTTP and HTTPS, without forcing an HTTPS connection. This setup means ImageShare is available on legacy browsers that have outdated certificate chains or no SSL support at all, and works on just about any host operating system.
This guide assumes you have some knowledge of Docker (this video is a simple overview). You also need Docker Desktop installed for running locally.
ImageShare uses two Docker Compose configurations, found in the root directory of this repository:
- docker-compose.yml: This is intended for development work or running a server without SSL (or before SSL is available).
- docker-compose-prod.yml: This is intended for use on servers, with full support for HTTPS/SSL.
Setting up ImageShare on a production server involves using the docker-compose config first, then switching to docker-compose-prod after Certbot has successfully obtained a certificate.
First, clone the ImageShare repository, if you haven't already:
git clone https://github.com/corbindavenport/imageshare.git
cd imageshare
Create a new plain text file in the root directory (same folder as this document) called .env, with UPLOAD_LIMIT=20 as the only line. You can do it manually or with this command:
echo "UPLOAD_LIMIT=20" > .env
This sets the file size limit for uploaded files at 20MB, and leaves all other options as the defaults. See the full list of settings for more information.
Finally, start the ImageShare server like this:
docker compose -f docker-compose.yml up --build
ImageShare should now be accessible in your web browser from http://localhost. You can also test it on other devices on the same network by replacing localhost with your local IP address, like this: http://192.168.1.500.
When you're done, run this command to shut down the containers:
docker compose down
You need a server with Docker and Docker Compose installed. I used the pre-configured Docker droplet from DigitalOcean. Clone the ImageShare repository on your server, if you haven't already:
git clone https://github.com/corbindavenport/imageshare.git
cd imageshare
You need a web doman to use for public access. If you want to retain compatibility with legacy web browsers, you may need to use an old top-level domain (e.g. .com or .net) instead of newer TLDs.
Create a new plain text file in the root directory (same folder as this readme) called .env to store your settings. The only required settings are the domain, the file size limit on uploads (in megabytes), and the email address to be used for the Let's Encrypt certificate:
DOMAIN=yourwebsitegoeshere.com
[email protected]
UPLOAD_LIMIT=20
Next, set the DNS settings for your domain like this:
| Type | Host | Value |
|---|---|---|
| A | @ | Your server IP address, like 165.20.200.20 |
| CNAME | www | Your domain without the www part, like yourwebsitegoeshere.com |
Then start the regular ImageShare server:
docker compose -f docker-compose.yml up
ImageShare should now be running at the server's IP address. It will automatically run Certbot to create the certificate, and you will see a confirmation message if it worked. If it didn't work (e.g. if your DNS configuration wasn't fully applied yet), you can either restart the ImageShare server or just restart the Certbot container:
docker compose restart certbot
Once you have your certificate, shut down the default server and start up the production server:
docker compose down
docker compose -f docker-compose-prod.yml up
Your ImageShare server should now be accessible over both HTTP and HTTPS connections. Keep in mind that the HTTP version will not automatically redirect to HTTPS. Some modern browsers will switch to HTTPS automatically, but otherwise, you will need to type https:// in the URL to use the secure version.
You can automate the certificate renewal so SSL continues to work without manual work. On Linux systems, create a crontab like this:
crontab -e
Add the following line to the end of the file, which runs certbot on the first day of every second month (certificates last 90 days), and restarts all Docker containers to apply changes:
0 5 1 */2 * /usr/bin/docker compose -f /user/imageshare/docker-compose-prod.yml restart certbot
You will need to replace the path to the compose file with the correct path. Then save your changes.
To apply new changes, such as edited config files or a new version pulled from GitHub, shut down the containers and start them with --build, like this:
docker compose down
docker compose -f docker-compose.yml up --build
If you're using the production application, replace docker-compose.yml with docker-compose-prod.yml.
This is a complete list of configuration options in ImageShare with the .env file.
| Setting | Example Value | Description |
|---|---|---|
DOMAIN |
yourdomain.com |
The web domain for the ImageShare server, used in generating QR codes, image shortlinks, and other functions. If left blank, ImageShare will use the IP address from the connected client. For example, the shortlink might look like http://192.168.50.28/i/559e5. |
EMAIL |
[email protected] |
This is the email used for Certbot, so Let's Encrypt can send alert emails about certificate expiration. |
PLAUSIBLE_DOMAIN |
yourdomain.com |
The domain used for Plausible Analytics, the feature is turned off if the setting isn't defined. See the Plausible Analytics section for more information. |
UPLOAD_LIMIT |
10 |
The file size limit for uploads, measured in Megabytes. This is the only setting that is required. |
AUTODELETE_TIME |
2 |
The time delay to automatically delete files, measured in minutes. If you are running a public server, this should be a low number to prevent possibly-malicious content from remaining accessible for too long. |
This is a sample .env file for a production server with Plausible Analytics enabled:
DOMAIN=myimageshare.com
PLAUSIBLE_DOMAIN=myimageshare.com
[email protected]
UPLOAD_LIMIT=5
ImageShare can optionally use Plausible Analytics to track pageviews and uploads. The collected data includes pageviews, upload events, and the upload method. The analytics is handled server-side, using the client's user agent and IP address. Analytics does not contain any data about the contents of the upload.
To get started, create a website in Plausible. The Plausible domain doesn't have to match the actual site URL.
You have to create custom events and goals to track uploads and the type of uploads. In the Plausible domain settings, open the Goals page and create a custom event called "Upload". This is used to track image upload events.
Next, open the Custom Properties page, and create a new property called "Upload Mode". This was previously used to track different upload methods (Imgur, ImgBB, etc.), but as of ImageShare 3.0, there is only one "Native" upload method. If more upload methods are added in future updates, they will use this property.
Next, add the Plausible domain to your server .env file like this:
PLAUSIBLE_DOMAIN=yourdomain.com
Finally, apply your settings by restarting the server. If you're running the production server, replace docker-compose.yml with docker-compose-prod.yml in the below example.
docker compose down
docker compose -f docker-compose.yml up
Pageviews and upload events should now appear in your Plausible dashboard. Note that the Nintendo 3DS, New Nintendo 3DS, and Wii U Browsers all appear as "NetFront" in Plausible.