New features request

[RodEnry]

Hello Stefano,
a very nice plugin.

I'd suggest this new features:

• Remove the limits on the mechanicals and other parameters (for example be able to create a very small motor below 10mm of shaft diameter)
• Selectable 3-phase, 3-phase with common center or single phase (one wire with two connections)
• Possibility of group or not group the elements
• Adjustable terminal position
• Add radius the possibility of creating the direction change in the copper tracks

Many thanks!
Enrico

[cooked]

Hi @RodEnry,
I've been working on the points you suggested and that we discussed offline.

• The mechanical limits should have been removed in general, apart from min track spacing and that would be still helpful to have a clean DRC.
• Regarding wiring scheme there's now a drop-down menu, however still only 3P connection is implemented at the moment. Still, this should be the best option also for your use case.
• Grouping: this has been removed in general, so all items are single lines and vias, etc.... since most of the time when you want to delete you want either clear all or just cherrypick single items.
• Terminal position: this is not adjustable per se, but you can select not producing an outline and have no terminals, then you can manually place the coils layout and route the rest of the terminals to the rest of your circuitry

let me know how it goes.

cheers
stefano