Change Log

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog and this project adheres to Semantic Versioning.

Unreleased

Added

Fixed

HFP: use 'don't care' to accept SCO connections, fixes issue on ESP32
HFP: fix LC3-WB init
HFP AG: fix setup of audio connection in service level established event

Changed

Release v1.6.1

Added

GAP: support coordinated private random address updates
libusb: support send/receive of HCI ISO packets

Fixed

GAP: allow use of own address type different from gap_random_set_mode() incl. RPA in LE Extended Advertising
GAP: emit GAP_SUBEVENT_LE_CONNECTION_COMPLETE for failed outgoing connections
HCI: improved BIG setup/termination
SM: abort pairing with invalid parameter error for encryption key size > 16
SM: ignore Security Request after re-encryption has started
SM: respond to Pairing Request after Identity Resolution failed
SM: fix CTKD from Classic in Peripheral role
ATT Server: support delayed read responses for registered services
ATT Server: allow to start crypto operation from delayed att read/write request
HFP: use round robin for outgoing connections
HFP HF: send HF Indicator update only if enabled by AG
HFP AG: send OK after SLC for HF that does not support 3-way-calling or HF Indicators
HSP HS: use EV3 and 2EV3 packets for 7.5 ms voice interval
AVDTP: use round robin for outgoing connections
AVDTP: allow call to avdtp_disconnect before connection was established
A2DP: allow call to avdtp_disconnect before connection was established
AVRCP: use round robin for outgoing connections
GOEP Client: use round robin for outgoing connections
HID Host: use round robin for outgoing connections
HOG Host: emit GATTSERVICE_SUBEVENT_HID_REPORT for hids_client_send_write_report

Changed

HCI: hci_reserved_packet_buffer and higher layer functions asserts if packet buffer is free instead of return value
GAP: suppress GAP_SUBEVENT_LE_CONNECTION_COMPLETE for intermediate connection pause due to filterlist update
GAP: mutual authentication for legacy secure connections to prevent BIAS attacks was made optional with ENABLE_MUTUAL_AUTHENTICATION_FOR_LEGACY_SECURE_CONNECTIONS. Not needed for default encryption key size of 16
HCI Dump: only log internal/BTstack events for ENABLE_LOG_BTSTACK_EVENTS

Release v1.6

Added

HCI: allow to configure Classic ACL packet types with hci_enable_acl_packet_types
GAP: emit generic GAP_SUBEVENT_LE_CONNECTION_COMPLETE for any LE Connection Complete
SM: support LE Secure Connection debug keys for testing
L2CAP: additional authorization_required param in l2cap_ecbm_register_service
GATT Client: support GATT over Enhanced LE Bearer
GATT Server: support GATT over Enhanced LE Bearer
A2DP: support SDP record without service name and/or provider
AVRCP: support SDP record without service name and/or provider
HFP: hfp_hf_create_sdp_record_with_codecs and hfp_hf_create_sdp_record_with_codecs
HFP: support SDP record without service name
HFP: support for LC3-SWB
SPP Server: support SDP record without service name
HOG Device: emit HIDS_SUBEVENT_SET_REPORT
HOG Device: provide report for GET REPORT operation via callback
SBC Codec: new interface allows for multiple instances
LE Device DB: le_device_db_dump dumps LTK
Port for Zephyr 3.x
Port for FreeBSD that uses kernel netgraph HCI node

Fixed

HCI: fix remove le device from whitelist and periodic advertiser list
HCI: fix restart connect with whitelist after whitelist modification
GAP: store classic link keys independent from peer bonding request
SM: directly detect invalid Public key when Controller ECC is used
SM: sm: only set LinkKey flag in Pairing Request/Response if BR/EDR supported locally
L2CAP: make l2cap_get_remote_mtu_for_local_cid available to LE-only builds
L2CAP: handle all signaling requests and responses in closed state
HFP: use 'don't care' to accept SCO connections, fixes issue on ESP32
HFP: fix LC3-WB init
HFP AG: fix setup of audio connection in service level established event
HFP AG: fix BCM WBS setup
HFP AG: allow use of mSBC in subsequent audio connections after CSVD downgrade
HFP AG: fix terminate held call
HFP HF: send 'deactivate EC/NR' if supported in AG
HID Device: set Report Mode as default
HID Host: support large HID Descriptors
AVDTP: limit L2CAP MTU to largest BR/EDR packet, fixes A2DP Sink role for some Samsung TV
AVDTP: fix Get Stream Configuration
AVDTP: reject suspend in state endpoint open
AVDTP: return error in avdtp_suspend_stream if state is not streaming
AVRCP: reject incoming second l2cap connection
AVRCP: generate command for avrcp_controller_get_element_attributes dynamically
SPP Server: fix SPP version in SDP record
GATT Client: ignore notifications/indications until re-encrypted for bonded device without ENABLE_LE_PROACTIVE_AUTHENTICATION
btstack_flash_bank: support alignment larger than 4
windows: fix timestamps in packet logs

Changed

HCI: simplified implicit SCO flow control
HCI: return ERROR_CODE_COMMAND_DISALLOWED for outgoing connections in gap_connect
GAP: only return status code for errors in gap_connect
AVRCP: shorten default SDP Service and Provider Names
GATT Client: emit query complete event for gatt_client_discover_characteristic_descriptors in next run loop iteration
HFP: report HFP Version 1.9 in SDP record
HID Parser: ignore Report Items without Usage
btstack_crypto: allow MBEDTLS config via MBEDTLS_CONFIG_FILE
remove old Zephyr 1.9 port
ports: require CMake 3.12 for CMake projects

Release v1.5.6

Added

HCI: HCI_ACL_CHUNK_SIZE_ALIGNMENT allows to keep HCI transport writes aligned
GAP: support additional LE PHYs for scanning and outgoing connections
GATT Client: allow to queue requests with gatt_client_request_to_send_gatt_query and gatt_client_request_to_write_without_response
GATT Client: support GATT over BR/EDR transport via gatt_client_classic_connect
HFP: provide SCO packet types and rx/tx packet lengths in HFP_SUBEVENT_AUDIO_CONNECTION_ESTABLISHED
HFP: allow to register custom at commands with hfp_hf_register_custom_at_command
HFP: experimental support for LC3-SWB from HFP SWB draft with ENABLE_HFP_SUPER_WIDE_BAND_SPEECH
AVRCP: support Cover Art via avrcp_cover_art_client
example: gatt_streamer_server and le_streamer_client report DLE and PHY changes
NXP: support for NXP Controller with bootloader versions v1, e.g. NXP 88W8997, and v3, e.g. NXP IW416 or IW61x
esp32: support esp-idf v5.x audio driver
esp32: warn about sdkconfig issues
esp32: add BTstack component config options via menuconfig
esp32: allow to disable default audio i2s driver via component config
esp32: btstack_stdio_init configures buffered output, required for stdin support
Port for Renesas RA6M4 with DA14531
Port for NXP Controller on POSIX (posix-h4-nxp)
Port for newer Infineon Controller on POSIX (posix-h4-bcm) that requires autobaud-mode

Fixed

HCI: fix set extended scan response
HCI: fix report of extended advertisements with data len > 31
HCI: fix CTKD in Initiator role over BR/EDR SC when using dedicated bonding
SM: fix value in SM_EVENT_NUMERIC_COMPARISON_REQUEST
SM: ignore Security Request during re-encryption
GATT Client: return ERROR_CODE_UNKNOWN_CONNECTION_IDENTIFIER for invalid connection handle
A2DP: emit A2DP_SUBEVENT_STREAM_ESTABLISHED with if connection fails, e.g. because of Page Timeout
A2DP Source: a2dp_source_stream_send_media_payload was removed, use a2dp_source_stream_send_media_payload_rtp instead
A2DP: use samples as timestamp, fixes issue with Apple Airpods Pro 2nd Gen
AVDTP Source: avdtp_source_stream_send_media_payload was removed, use avdtp_source_stream_send_media_payload_rtp instead
AVRCP: re-register for notification
BNEP: validate UUID32 and UUID128 service in connect request
HFP: fix setup/accept of synchronous connection
HFP: use mandatory safe settings considering BR/EDR Secure Connections to accept synchronous connections
HFP: avoid SCO packet types not supported either locally or remotely
HFP: remove trailing newline/carriage return in custom command event
PBAP Client: make pbap_set_property_selector work for Pull Phonebook
btstack_stdin_embedded: use timer to poll RTT input, fix for tickless RTOS
esp32: fix audio power amplifier control on Lyra T v4.3 board
tool/convert_gatt_service: removed as GATT Service descriptions not available on Bluetooth SIG web site

Changed

GAP: add gap_set_peer_privacy_mode with default LE_PRIVACY_MODE_DEVICE
GAP: use stack defaults for LE Connection Parameter Updates
GAP: set minimum and maximum CE length to 0
GAP: ENABLE_EXPLICIT_DEDICATED_BONDING_DISCONNECT disables disconnect after dedicated bonding
GOEP Client: support multiple instances
A2DP Sink: drop unused local seid argument in a2dp_sink_establish_stream
HFP: emit HFP_SUBEVENT_CUSTOM_AT_MESSAGE_SENT after sending custom command / unsolicited response code
sco_demo_util: replace hfp_msbc by hfp_codec
BCM: look for PatchRAM file with prefix DEVICE_NAME and extension '.hcd'
bluetooth: indicated identity address in resolved address type enums name
btstack_audio: added get_samplerate function to help with audio sample rate synchronization
btstack_flash_bank: write empty tag instead of overwriting existing tag with ENABLE_TLV_FLASH_WRITE_ONCE
esp32: drop support for Makefile projects from esp-idf 3.x
esp32: avoid deprecated btstack_run_loop_freertos API calls
esp32: use sample rate compensation in a2dp_sink_demo
stm32-f4discovery-cc256x: use external oscillator for better I2S clock
stm32-f4discovery: use sample rate compensation in a2dp_sink_demo

Release v1.5.5

Added

hci_dump_stdout: allow to truncate ACL, SCO and ISO packets with HCI_DUMP_STDOUT_MAX_SIZE_*
GATT Service: Broadcast Audio Scan Service Server and Client (BASS 1.0)
example/a2dp_source_demo: add command to scan and connect to Bluetooth speaker by class of device

Fixed

GAP: reload LE Resolving List after power-cycle
GAP: fix setting of LE Scan Response for data that needs to be fragmented
SM: fix pairing process with active ATT communication
ESP32: fix init for BR/EDR Only mode
ESP32: fix audio driver for sink + source mode
ESP32: fixes for ESP-IDF v5.x
ESP32: fix compile of non-BTstack examples after adding components/btstack

Changed

GAP: reload LE Filterlist and Periodic Advertiser List after power-cycle
SM: delete bonding information for existing device with BD_ADDR on new pairing with different IRK
Mesh: move GATT Services into src/mesh/gatt-service
LE Audio: move GATT Services into src/le-audio/gatt-service
libusb: improve implementation

Known Issues

ESP32: audio driver for ES8388/LyraT v4.3 not updated for esp-idf 5.x

Release v1.5.4

Added

HFP HF: send custom AT command with hfp_hf_send_at_command
HFP HF: terminate held calls with hfp_hf_terminate_held_calls
HFP HF: provide Call Waiting information alpha field
HFP HF: add hfp_hf_set_default_microphone_gain and hfp_hf_set_set_default_speaker_gain for SLC
HFP AG: support handling of custom AT commands with hfp_ag_register_custom_at_command
HFP AG: send custom unsolicited result code with hfp_ag_send_unsolicited_result_code
GAP: allow to enable duplicate filter for LE scanning with gap_set_scan_duplicate_filter
GAP: support BIG with gap_big_create and gap_big_terminate
GAP: support BIG Sync gap_big_sync_create and gap_big_sync_terminate
GAP: support Periodic Advertisement Sync Transfer
port: CMake build files in all windows-* ports allow to use Visual Studio 2022
embedded audio: mono audio is played on both channels if HAVE_HAL_AUDIO_SINK_STEREO_ONLY is defined
Support for ESP32-C3 and ESP32-S3

Fixed

HCI: only add paired LE devices with IRK to resolving list
HCI: send HCI LE Create Connection Cancel only once for outgoing LE connections without whitelist
GAP: use static random address after power up
L2CAP: fix L2CAP_EVENT_CONNECTION_PARAMETER_UPDATE_REQUEST
SM: avoid potential loop during CTKD

Changed

HCI Dump: provide log level to log_message implementation
GAP: replace BTSTACK_EVENT_DISCOVERABLE_ENABLED with BTSTACK_EVENT_SCAN_MODE_CHANGED

Release v1.5.3

Added

GAP: support periodic advertising with ENABLE_LE_PERIODIC_ADVERTISING
GAP: support periodic inquiry mode with gap_inquiry_periodic_start
HFP HF: provide Calling Line Identification alpha field
HFP HF: emit HFP_SUBEVENT_TRANSMIT_DTMF_CODES after sending DTMF command
GOEP Server
Chipset: support for firmware download and configuration of Realtek Controllers

Fixed

GAP: fix gap_connect_cancel for gap_connect_with_whitelist
GAP: fix race condition that causes duplicate authenticate request
SM: address update for non-resolvable private addresses
SM: reset state on power off transition
L2CAP: Fix accept incoming ERTM connection when Information Request already complete
A2DP Sink: fix config API for AAC, ATRAC, and other codecs
HFP: try next link setting for SCO connection failure after SCO reject errors
HFP AG: activate all AG indicators upon service level connection establishment
HFP AG: handle call termination in alerting call state
HFP HF: fix parsing of phone number for voice tag
HFP HF: report HFP_SUBEVENT_NETWORK_OPERATOR_CHANGED event

Changed

HCI: use ERROR_CODE_CONNECTION_REJECTED_DUE_TO_SECURITY_REASONS to rejected classic connections
SM: pairing events indicate if LE Secure Connection will be used
A2DP: new a2dp.c contains shared code of Sink and Source roles
A2DP Sink: automatically configure stream endpoint for outgoing connections
HFP AG: drop unused number parameter from hfp_ag_outgoing_call_initiated
libusb: command line options to delete TLV and specify log file path
Windows: native implementations of btstack_tlv_window, hci_dump_windows_fs, hci_dump_window_stdout

Release v1.5.2

Added

GAP: ENABLE_HCI_SERIALIZED_CONTROLLER_OPERATIONS serializes Inquiry, Remote Name Request and Create Connection operations
GAP: support extended advertising with ENABLE_LE_EXTENDED_ADVERTISING
GAP: gap_enable_link_watchdog() uses automatic flush timeout to disconnect if data cannot be sent
GAP: gap_secure_connections_active() to query if BR/EDR Secure Connecions are possible
ATT DB: provide gatt_server_get_handle_range_for_service_with_uuid16 to find included service within handle range
GATT Service: Audio Input Control Service Server (AICS 1.0)
GATT Service: Microphone Control Service Server (MCS 1.0)
GATT Service: Volume Control Service Server (VCS 1.0)
GATT Service: Volume Offset Control Service Server (VOCS 1.0)

Fixed

POSIX: fix RTS/CTS configuration by keeping local termios copy in btstack_uart_posix
HCI: fix handling of HCI Connection Complete with error (regression introduced in v1.5.1)
GAP: disable scanning, advertising, connection before updating random address
GAP: fix LE Scan with whitelist
HFP_AG: fix tracking for call dropped during outgoing ringing
HFP: Free HFP Connection object on SDP error / Service not found
PBAP Client: emit operation complete with status OBEX_ABORTED

Changed

Chipset: use da145xx in folder/file/function names for Dialog Semiconductor SoCs
GAP: set min encryption key size during init, if supported
AVDTP: use BLUETOOTH_SERVICE_CLASS_AUDIO_SINK / SOURCE instead of BLUETOOTH_PROTOCOL_AVDTP in SDP queries
ATT Server: use uint8_t for status returns
libusb, POSIX and Windows ports: use '-' instead of ':' in btstack_BD_ADDR.tlv filename

Release v1.5.1

Added

GOEP Client: add goep_client_version_20_or_higher
ESP32: implement audio source

Fixed

PBAP Client: support disconnect while operation is ongoing
PBAP Client: use SRM only if GOEP v2.0 or higher connection
PBAP Client: emit vCard entry data as PBAP_DATA_PACKET
L2CAP: limit remote MTU by local tx configuration in ERTM

Changed

Example: init SM if LE supported to avoid issue with Android Cross-Transport Key-Derivation
ESP32: update sdkconfig for esp-idf v4.3, disable Bluedroid host stack
ESP32: use I2S configuration from ESP32 LyraT V4.3

Release v1.5.0

Added

HCI Dump: Support BTSnoop format in hci_dump_posix_fs.c for format = HCI_DUMP_BTSNOOP
HCI Dump RTT STDOUT: drop messages if RTT buffer is full and RTT is configured for non-blocking
HCI: hci_remove_event_handler to remove packet handler
hci_cmd: support variable length fields and arrayed parameters
GAP: ENABLE_EXPLICIT_LINK_KEY_REPLY allows for asynchronous link key lookup by application
GAP: gap_set_page_timeout to set Page Timeout
GAP: gap_inquiry_set_scan_activity to set Inquiry Scan Activity
L2CAP: emit L2CAP_EVENT_INFORMATION_RESPONSE event with extended features and fixed channels supported
L2CAP: support Enhanced Credit-based Flow-Control Mode for connection-oriented channels over BR/EDR/LE
A2DP: allow to register media codec validator for sink and source with:
- a2dp_sink_register_media_config_validator
- a2dp_source_register_media_config_validator
A2DP Sink: allow accept or reject of stream start on A2DP_SUBEVENT_START_STREAM_REQUESTED when ENABLE_AVDTP_ACCEPTOR_EXPLICIT_START_STREAM_CONFIRMATION is defined
OBEX: new obex_parser for chunked OBEX data
SM: Support Cross-Transport Key-Derivation (CTKD) of LE LTK from BR/EDR SC Link Key in Responder role
SM: sm_remove_event_handler to remove packet handler
GATT Service: Bond Management Service (BMS 1.0) Server
GATT Service: Microphone Control Service (MICS 1.0) Server
GATT Service: TX Power Service (TPS 1.0) Server
POSIX: btstack_signal allows to register for callback on signal, e.g. ctrl-c
Windows: btstack_stdin_window_register_ctrl_c_callback allows to register for ctrl-c

Fixed

A2DP Source: fix reconfigure
AVRCP Controller: prevent registering of notifications for unsupported events
RFCOMM: fixed handling of remote port configuration command
HFP AG: fix accept incoming connection while audio connection is established
PBAP Client: handle chunked vCard Listing
PBAP Client: use new streaming obex_parser to handle chunked OBEX data
SM: Work around for unexpected Windows 10 disconnect for BR Secure Connections (SMP over BR timeout)
SM: support storing bonding information for devices with identical IRK but different public addresses
GAP: restart advertising when private address changes
le_device_db_tlv: keep number of devices reported by le_device_db_count if old entry is replaced

Changed

Drop iOS support
HCI: provide status instead of undocumented int error code and bool for API functions
HCI: use 1000 ms watchdog to force power off for hci_power_control(HCI_POWER_OFF)
GAP: local name, EIR data, class of device and default link policy can be updated at any time
L2CAP: provide status instead of undocumented int error code and bool for API functions
L2CAP: remote features not required for SDP connections
L2CAP: replaced l2cap_register_packet_handler with l2cap_add_event_handler to register multiple handlers
L2CAP: drop reason parameter in l2cap_disconnect
L2CAP: use official terminology for L2CAP channel modes - ENABLE_L2CAP_LE_CREDIT_BASED_FLOW_CONTROL_MODE replaces ENABLE_LE_DATA_CHANNELS
L2CAP: unify API for can send now, request to send, and send packet and disconnect channel
L2CAP: unify events for can send now, packet sent, channel closed (CbM/ECBM using existing events)
RFCOMM: RFCOMM_EVENT_PORT_CONFIGURATION contains rfcomm_cid and remote flag, emitted for query config
RFCOMM: provide status instead of undocumented int error code and bool for API functions
RFCOMM: remote port configuration, line status, and modem status are sent by channel state machine
HSP: add ACL Connection to all events and BD ADDR to HSP_SUBEVENT_RFCOMM_CONNECTION_COMPLETE
HFP: API functions return status code if appropriate
HFP: removed one parameter from hfp_ag/hf_activate_voice_recognition function, introduce hfp_ag/hf_deactivate_voice_recognition instead
HFP: merged legacy and enhanced Voice Recognition Activation (VRA) API. If available enhanced mode will be preferred.
HFP: separate events for activation (HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED) and deactivation (HFP_SUBEVENT_VOICE_RECOGNITION_DEACTIVATED) instead of combined HFP_SUBEVENT_VOICE_RECOGNITION_STATUS with status field. HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED contains field "enhanced" to indicate if enhanced mode is used.
HFP: enhanced VRA: HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED is emitted after VRA is ready and the the audio connection is established. This simplifies HFP HF client logic, i.e. client can call hfp_hf_enhanced_voice_recognition_report_ready_for_audio directly upon reception of HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED event.
AVDTP: media config validator is called with preview of media codec configuration event and configured separately for sink/source
AVRCP: use PANEL as default unit + subunit info
AVRCP Controller: automatically query supported events when registering for notifications
AVRCP Target: cache companies and events in library and remove need to answer query in application callback. Use Bluetooth SIG as default company.
Run Loop: new functionality for HCI transport drivers and inter-process communication:
- btstack_run_loop_poll_data_sources_from_irq: used to transfer control from IRQ handler to main thread/run loop
- btstack_run_loop_execute_on_main_thread: schedule code execution on main thread from other thread
- btstack_run_loop_trigger_exit: trigger run loop exit
POSIX / Windows / Raspi / Qt: use updated ctrl-c handling
POSIX TLV: use max value size of 2048, assert in store function if value size is larger

Release v1.4.1

Added

GAP: emit GAP_EVENT_PAIRING_STARTED and GAP_EVENT_PAIRING_COMPLETE

Fixed

GAP: store link key in hci connection struct to allow authenticate after pairing without bonding
GAP: avoid requesting authentication twice
GAP: cache own address on start advertising and connecting, provide getters
GAP: stop LE connecting if create connection fails (e.g. connectable adv active and multiple roles not supported)
SM: fix race condition between local address changes and pairing procedure
ATT DB: fix spelling gatt_server_get_handle_range_for_service_with_uuid128, gatt_server_get_handle_range_for_service_with_uuid16

Changed

HCI: update advertising data without stopping advertising first
GAP: Drop local bonding flag in IO Capability Reply if remote does not indicate bonding
GAP: return status for gap_set_security_mode
GAP: abort legacy pairing if Level 4 is required
GAP: abort SSP on IO Capabilities Request event if Level 4 is required but SC not supported by remote
GAP: abort SSP on User Confirmation Request event if Level 3 is required but MITM protection not possible
GAP: validate minimal service security level can be reached during pairing in responder role
L2CAP: don't trigger hci disconnect if l2cap security requirements are insufficient
CVE-2020-26555: reject connections to and from devices with same BD ADDR
CVE-2020-26555: ignore NULL link key
CVE-2020-26558: abort LE Secure Connection pairing if remote uses the same public key

Release v1.4

Added

HCI: btstack_transport_sco.h supports SCO over physical PCM/I2S interface (HAVE_SCO_TRANSPORT)
POSIX: btstack_transport_sco_i2s_test_bridge.c implements SCO transport interface for UART-to-I2S test bridge
btstack_uart: btstack_uart_t interface extends btstack_uart_block_t:
- support sending and receiving SLIP frames for HCI H5
- support odd parity
- hci_transport_h4 and chipset drivers have new functions to provide btstack_uart_t
btstack_uart_slip_wrapper: wrapper that implements SLIP functionality for existing btstack_uart_block drivers.
hci_transport: add parity field and pass on to btstack_uart_t in h4 and h5
GATT Client: Battery Service Client
GATT Client: Device Information Service Client
GATT Client: HID-over-GATT (HOG) Client, Report and Boot Host
GATT Client: Scan Parameters Service Client
GATT Server: Scan Parameters Service Server
GAP: support scan page configuration with gap_set_page_scan_activity and gap_set_page_scan_type
GAP: support sniff subrating with gap_sniff_subrating_configure
GAP: support QoS setup with gap_qos_set
AVRCP: new field button_pressed in AVRCP_SUBEVENT_OPERATION
AVRCP: AVRCP_SUBEVENT_OPERATION emitted for button release
AVRCP Controller: avrcp_controller_start_press_and_hold_cmd supports arbitrary device buttons
AVRCP Controller: reassemble fragmented AVCTP packets
AVDTP: avdtp_register_media_config_validator allows to validate media codec configuration
A2DP Source: ENABLE_A2DP_SOURCE_EXPLICIT_CONFIG disables auto config. requires call to a2dp_source_set_config_{CODEC}

Fixed

GAP: calculate IO Cap AuthReq Bondable Mode based on gap_ssp_set_authentication_requirement and gap_set_bondable_mode
GAP: only store link key for SSP if remote side has set bondable in io cap auth requirements
GAP: allow to disable link supervision timeout
GAP: fix gap_connect after gap_connect_cancel
GAP: re-configure advertisements after power cycle
HCI: handle start inquiry failure
L2CAP: fix create outgoing connection triggered from packet handler on hci disconnect event
L2CAP: return unknown mandatory option in config response
AVDTP: fix spelling avdtp_set_preferred_sampling_frequency
AVRCP Target: fix notification changed event
HFP: Emit audio connection released on SLC Release, e.g. on remote power off
HFP HF: fix audio connection setup if codec negotiation is supported
HFP HF: only emit single event for RING and AG Status updates
HFP AG: fix audio connection setup for in-band ringtone on incoming connection

Changed

Port Archive: moved ports that are not recommended for new designs to port/archive folder:
- MSP430: the ports used the older community GCC version without 20-bit support needed for code size > 64kB
- Broadcom/Cypress H5: uploading PatchRAM is only possible in H4 mode. It's better to also use H4 in general
- PIC32-Harmony: the port used Harmony v1 while Harmony v3 has been out since a while
- iOS: not supported
Run Loop Base: functionality used in most platform run loop implementations
- code from btstack_run_loop_base.c moved into btstack_run_loop.c to minimize changes to build systems
- btstack_run_loop_base.c is a placeholder and can be removed from build
HCI Dump: replace monolithic hci_dump.c (with many #ifdefs) into dispatcher with platform-specific implementations:
- posix/hci_dump_posix_fs - writes binary log file
- posix/hci_dump_stdout - log to console using printf with local system time
- embedded/hci_dump_embedded_stdout - log to console using printf
- embedded/hci_dump_segger_stdout - log to RTT console using SEGGER_printf
- embedded/hci_dump_segger_binary - writes binary log over RTT to host
HCI: config I2S for BCM Controllers if ENABLE_SCO_OVER_PCM, reduce bit clock to 256/512 kHz
btstack_uart_posix: supports SLIP frames and replaces btstack_uart_block_posix
hci_transport_h5: more performant H5 implementation that requires btstack_uart_t driver with SLIP support
POSIX Ports: use new btstack_uart_posix implementation
posix-h5/posix-h5-bcm: use even parity for UART
HCI Transport: extract convenience function declaration for h4, h5, em9304_spi, and usb into separate hci_transport_{type}.h
GAP: provide Device ID from EIR in GAP_EVENT_INQUIRY_RESULT
GAP: only store link key if it allows requested security level
GAP: abort SSP pairing if MITM protection required but not possible
SM: start pairing as Central for already encrypted connection on Slave Security Request
GATT Client: Use ATT_READ_REQUEST for first blob of Read Long Characteristic and Read Long Characteristic Descriptor
GATT Server: Allow ATT Read Callback to return custom ATT Error Code
Nordic SPP Service Server: use GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED and GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED events instead of callback, and RFCOMM_DATA_PACKET for received data
u-blox SPP Service Server: use GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED and GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED events instead of callback, and RFCOMM_DATA_PACKET for received data
HID: Move src/classic/hid.h into src and prefix with btstack_ to use it with BLE and avoid name clashes
HFP: provide acl_handle in events to identify connection
HSP AG: emit HSP_SUBEVENT_BUTTON_PRESSED instead of audio connection setup/release
Example: use btstack_event.h getters instead of direct array access, use enum to compare status codes

Release v1.3.2

Added

GAP: support for Classic Out-of-Band (OOB) pairing via gap_ssp_remote_oob_data with ENABLE_CLASSIC_OOB_PAIRING
GAP: read local OOB data on start and on call to gap_ssp_generate_oob_data, provided via GAP_EVENT_LOCAL_OOB_DATA
HID Host: add profile, update hid_host_demo.c example

Fixed

L2CAP: make handling of HCI disconnect more robust
AVDTP: emit stream release for active stream if signaling connection is closed first, e.g. caused by HCI disconnect
AVRCP: fix issue when Controller and Target send at the same time

Changed

A2DP, AVDTP: use a2dp_source_set_config_{TYPE} and avdtp_config{TYPE}_store to avoid large number of parameters

Release v1.3

Added

CC256x: with ENABLE_CC256X_ASSISTED_HFP, HFP enables WBS codec on demand and configures PCM/I2S interface for 8kH/16kHz
BCM: with ENABLE_BCM_PCM_WBS, HFP enables WBS codec on demand and configures PCM/I2S interface for 8kH/16kHz
SDP Client RFCOMM: add sdp_client_query_rfcomm_channel_and_name_for_service_class_uuid
HFP: ENABLE_HFP_AT_MESSAGES lets HFP emit HFP_SUBEVENT_AT_MESSAGE_SENT and HFP_SUBEVENT_AT_MESSAGE_RECEIVED
A2DP, AVDTP: provide capabilities and configuration events for A2DP codecs: SBC, MPEG Audio, MPEG AAC, ATRAC
A2DP + AVDTP Source: allow to send media packet with avdtp_source_stream_send_media_packet and a2dp_source_stream_send_media_packet
A2DP + AVDTP Source: add avdtp_source_stream_send_media_payload_rtp and a2dp_source_stream_send_media_payload_rtp
A2DP Source: emit A2DP_SUBEVENT_SIGNALING_CAPABILITIES_COMPLETE
A2DP Source: allow to configure endpoints by calling a2dp_source_set_config_{TYPE} during SEP discovery with SBC fallback

Fixed

HCI: keep le connecting request on connection complete active, fixes gap_auto_connection_stop() + gap_auto_connection_start()
L2CAP: fix packet size check for incoming classic basic channels (regression introduced in v1.2.1)
HFP AG/HSP AG: avoid connecting to remote service with same role
A2DP Source: support multiple Stream Endpoints with different Media Codec types
A2DP Source: emit codec configure event with reconfigure flag set on reconfigure
GATT Compiler: support multiple instances of the same service

Changed

GAP: provide Link Type parameter to incoming connection filter for gap_register_classic_connection_filter
HFP/GOEP Client/AVDTP/A2DP: return SDP_SERVICE_NOT_FOUND if no suitable SDP record is found
AVDTP Source: avdtp_source_stream_send_media_payload includes SBC Header and was deprecated
AVDTP/A2DP: use avdtp_channel_mode_t in A2DP_SUBEVENT_SIGNALING_MEDIA_CODEC_SBC_CONFIGURATION
A2DP: fix events and use a2dp_cid, local_seid, remote_seid field names in A2DP sub-events
GATT Client: Skip MTU exchange after MTU exchange on ATT Server
Ports: STM32-F103RB Nucleo + CC256x port removed
ESP32: enabled HFP Wide-Band Speech, disable classic secure connections in HSP/HFP demos

Release v1.2.1

Fixed

L2CAP: use connection handle for channel lookups
L2CAP: forward data only in open state

Changed

L2CAP: check packet size against local mtu for classic basic channels

Release v1.2

Fixed

L2CAP: trigger pairing for outgoing LE Data Channels if security level insufficient
SM: fix update of sc flag for re-encrypted connection in peripheral role
SM: send security request on re-connect if bonded and ENABLE_LE_PROACTIVE_AUTHENTICATION is defined
ESP32: fix audio sink driver

Added

GAP: gap_delete_bonding removes device from LE Resolving List and from discards LE bonding information
GATT Client: delete bonding information if re-encryption fails and ENABLE_LE_PROACTIVE_AUTHENTICATION is not defined
GATT Client: gatt_client_set_required_security_level() allows to set required minimum security level for all GATT requests
SM: emit events for re-encryption started/complete when bonding information is available

Changed

AVRCP Controller: allow to send multiple absolute volume commands without waiting for response.
GAP: replaced ENABLE_LE_CENTRAL_AUTO_ENCRYPION with ENABLE_LE_PROACTIVE_AUTHENTICATION

Changes October 2020

Fixed

AVDTP Initiator: avoid use of remote seid for stream endpoint lookup, fixes issue with two connected devices
AVDTP Source: buffer for SBC media codec information got discarded, leading to invalid Set Configuration command in second connection
SM: only trigger Cross-Transport Key Derivation (CTKD) when bonding is enabled
SM: set LinkKey flag to request CTKD if enabled
SM: store CTKD key with Public Identity Address
SM: only allow CTKD to overwrite existing link key if derived key has same or higher authentication
SM: start SMP Timeout when sending Security Request
HFP HF: fix response to AG Codec Selection while waiting for OK of parallel command
HCI: fix reject of LE remote connection param request via HCI

Added

GAP: add gap_get_link_key_for_bd_addr
GAP: add gap_bonded to check if bonding information is available for active connection
SM: support h7 for CTKD

Changed

SM: Cross-Transport Key Derivation requires ENABLE_CROSS_TRANSPORT_KEY_DERIVATION now
SM: block connection if encryption fails for bonded devices as Central
SM: support pairing as Central after failed re-encryption

Release v1.1

Fixed

AVRCP/AVCTP: report AVRCP 1.6 and AVCTP 1.4 in SDP record

Added

Changed

Changes September 2020

Fixed

HFP: fix parsing of ranges e.g. in +CIND responses
AVDTP, AVRCP: fix bugs due to transaction id overrun
A2DP Source: fix issues with stream configuration by sink
hci_dump: fix tv_us calculation for non-posix / embedded systems with binary output

Added

btstack_ring_buffer: add btstack_ring_buffer_reset to reset it to initial state/empty
GAP: Support for address resolution of resolvable private addresses by Controller with ENABLE_LE_PRIVACY_ADDRESS_RESOLUTION

Changed

AVDTP, AVRCP, HSP: schedule SDP query, avoids avoids 'command disallowed' if SDP client is busy
HSP, HFP: allow to configure usable SCO packet types
cc256x: update CC256xC init script to v1.4
A2DP Source: use Get All Capabilities if supported by remote get Delay Reporting capability

Changes August 2020

Fixed

ESP32: fix authentication for incoming Secure Connections
AVDTP: Fix forwarding of Delay reports
STM32-F4Discovery: fix pan_lwip_http_server by increasing HCI_ACL_PAYLOAD_SIZE
tool/create_packet_log: basic support for 16-bit Unicode log files from Windows

Added

btstack_run_loop_base: added btstack_run_loop_base_dump_timer
GAP: request role change for classic connection via gap_request_role
GAP: LE Whitelist API with gap_le_whitelist_x with x = add, remove, clear and new gap_connect_with_whitelist
SDP Client: add sdp_client_register_query_callback() allows to register query request instead of polling sdp_client_ready()
BNEP lwIP: add bnep_lwip_connect to establish BNEP connection and manage lwIP network interface
New btstack_linked_queue utility, a linked list-based queue with first-in-first-out semantics and constant time enqueue/dequeue operations
btstack_tlv_posix: add btstack_tlv_posix_deinit
New btpclient for use with auto-pts project

Changed

GAP: treat AES-CCM encrypted connection as mutually authenticated (BIAS)
GAP: 'gap_auto_connect_x' API deprecated. Please directly manage LE Whitelist with gap_le_whitelist_* functions and call gap_connect_with_whitelist instead
example/hid_host_demo: try to become master for incoming connections
btstack_run_loop: use btstack_assert instead of local while(true)
att_db_util: allow to reset att_db via att_db_util_init

Changes July 2020

Fixed

AVDTP: fix invalid response for Get Capabilities request if Delay Reporting was supported
AVDTP: handle concurrent signaling establishment with reject and retry

Added

example/hid_host_demo: support reconnect from HID device
Crypto: support software AES128 for AES-CCM operations
AVRCP: introduced AVRCP_FEATURE_MASK_* as alternative to avrcp_controller_supported_feature_t and avrcp_target_supported_feature_t enums
btstack_audio: add set_volume() to sink and set_gain() to source interfaces, minimal volume control for portaudio playback
AVDTP: renamed definition of supported features from AVDTP_SOURCE_SF_ and AVDTP_SINK_SF_ to AVDTP_SOURCE_FEATURE_MASK_ and AVDTP_SINK_FEATURE_MASK_ respectively
GAP: Provide gap_get_role to query master/slave role for HCI connection handle
GAP: Provide gap_pin_code_response_binary to use binary data as PIN, e.g. for pairing with Nintendo Wii Remote

Changed

GAP: set minimum required encryption key size for Classic connections back from 16 to 7, matching the Core spec

Changes June 2020

Fixed

HFP: Fix parsing of empty fields, e.g. phone number in +CLCC and other AT commands
SM: Fix validation of confirm value for secure connection Passkey entry
AVRCP: handle concurrent signaling establishment with reject and retry

Added

GAP: Detect Secure Connection -> Legacy Connection Downgrade Attack by remote features and actual encryption type (BIAS)
GAP: Mutual authentication: request authentication after Classic connection got encrypted (BIAS)
Windows port for Dialog DA14585 connected via serial port

Changes

CVSD PLC: treat zero frames as good and allow to mark data as bad, e.g. if reported by Controller as erroneous

Changes May 2020

Fixed

hfp_hf, hsp_hs: use eSCO params in accept sco connection only for incoming eSCO connections
pbap_client: fix PBAP UUID len on connect message
SM: fix secure connection pairing as peripheral when local user confirmation happens after remote one
A2DP Source: only connect to remote sink stream endpoints
btstack_hal_flash_memory: fix write of 0xff bytes to simulated flash
hsp_hs: fix disconnect if audio not connected
hsp_ag: fix accept incoming connection

Added

example/le_mitm: MITM implementation that forwards ATT PDUs and allows for pairing
GAP: gap_set_security_level sets required security level for incoming and outgoing connections
cc256x: allow to specify power vector for each modulation type
FreeRTOS: btstack_run_loop_freertos_trigger_exit allows to request run loop exit
SM: support LE Secure Connections Only mode with sm_set_secure_connections_only_mode
GAP: enable BR/EDR Secure Connections if supported, add gap_secure_connections_enable

Changed

L2CAP ERTM: send extended features request only once per HCI connection

Changes April 2020

Fixed

hog_mouse_demo/hog_keyboard_demo: handle set protocol mode = boot protocol mode
HCI: only update BD_ADDR placeholder in shortened and complete name in EIR data, limit device name to 240/248 bytes

Added

GAP: gap_set_allow_role_switch allows to prevent role switch in outgoing classic ACL connections
example: hog_boot_host_demo implements an HID-over-GATT Boot Host that supports keyboard and mouse
HCI: add ENABLE_LE_LIMIT_ACL_FRAGMENT_BY_MAX_OCTETS that forces fragmentation of ACL-LE packets to fit into over-the-air packet

Changed

Broadcom/Cypress: wait 300 ms after PatchRAM update in hci.c to assert Controller is ready
esp32: provide esp-idf/component/btstack/btstack_port_esp32.c and only minimal app_main in template/main/main.c
att_db: skip att_read_callback for ATT Read Blob Request if offset == value_len

Changes March 2020

Fixed

GAP: fixed gap_set_scan_parameters() if issued right before gap_start_scan()
HCI: only send HCI Read Local Encryption Key Size if supported by Controller

Added

GATT Client: allow to register for any notification/indication and/or any connection
HCI: added hci_read_inquiry_scan_activity and hci_write_inquiry_scan_activity commands
chipset: assert hci packet buffers are suitable for firmware upload or patches (atwilc3000,bcm,cc256x,intel)
btstack_util: added btstack_replace_bd_addr_placeholder

Changed

AVRCP Target: volume in avrcp_target_volume_changed is reported as current value in interim response to register for volume change notifications
SDP Client: query attributes 0x0000..0xffff instead of 0x0001..0xffff to match other stacks / improve compatibility with bad sdp server implementations

Changes Februar 2020

Fixed

AVRCP Target: fix reporting of PLAYBACK_STATUS_CHANGED
HCI: handle reconnect request for Classic and LE connections triggered by packet handler for Disconnection Complete Event

Changed

hid_host_mode: allow sniff mode

Added

port/qt-usb and port/qt-h4: integrate BTstack Qt run loop for Unix- and Win32-based Qt application connected to Bluetooth module via H4 over serial port or USB

Changes January 2020

Fixed

L2CAP ERTM: avoid read-after-free on decline of incoming connection
GATT Client: set uuid16 to zero when deserializing uuid128 services, characteristics, and descriptors
att_db_util: fix realloc of att db buffer for large attributes
btstack_tlv_posix: only keep last value in memory, fix delete operation
l2cap_signaling: use packet boundary flags 0x00 for LE signaling packets (ignoring hci_non_flushable_packet_boundary_flag_supported())

Added

att_db_util: provide GATT Database Hash via att_db_util_hash_calc
GATT Compiler: provide GATT Database Hash via GATT_DATABASE_HASH Characteristic
ATT Server: validate request pdu length

Changed

Crypto: update AES-CMAC implementation to access all message bytes sequentially

Changes December 2019

Fixed

example/pan_lwip_http_server: use Network Access Point, CoD
sm: emit pairing complete in master role when no keys are distributed / bonding disabled

Added

Changed

Updated CC256x initscript: CC256xC v1.3
ESP32: add CMake project files

Changes November 2019

Fixed

AVDTP Source: return correct avdtp_cid and local_seid in AVDTP_SUBEVENT_STREAMING_CAN_SEND_MEDIA_PACKET_NOW
L2CAP: send LE Data Channel SDUs round robin with other data
L2CAP ERTM: send ERTM I-frames round robin with other data

Added

ATT Server: return error if request to send now for Notification or Indication already registered
Linked List: return if item was added for btstack_linked_list_add[_tail]
btstack_run_loop_remove: return bool true if timer/data source was removed
segger-rtt: allow to configure with SEGGER_RTT_PACKETLOG_* directives, update to v6.54
GAP: support setting Link Supervision Timetout for outgoing Classic connections using gap_set_link_supervision_timeout
lwip: add download test files to http server demo

Changed

Linked List: return bool true if item was removed

Changes October 2019

Fixed

Added

btstack_bool.h: provide boolean type 'bool' via <stdbool.h> or as backport
provide btstack_assert(condition)
H4 Transport: avoid calling hci_transport_h4_trigger_next_read when transport is closed

Changed

libusb and posix ports: store bonding information in TLV

Changes September 2019

Fixed

L2CAP ERTM: assert that packet can be stored in fragment buffers in ertm
L2CAP ERTM: reject incoming connection if ERTM is configured as mandatory but not supported by remote
GATT Client: allow Write Without Response independent of other requests

Added

GAP: allow to reject GAP classic connection via gap_register_classic_connection_filter
GAP: support reading RSSI for Classic+LE using gap_read_rssi. Emits GAP_EVENT_RSSI_MEASUREMENT

Changed

Bluetooth and BTstack Error Codes and Events: collect status codes in bluetooth.h and events in btstack_defines.h
bluetooth.h: extract internal defintitions to respective protocol layers
Updated CC256x initscripts (CC256xB v1.8, CC256xC v1.2, CC256xC v1.2)

Changes August 2019

Fixed

POSIX, WICED, Windows, FreeRTOS run loops: handle time_ms overrun after 49 days
RFCOMM: accept incoming L2CAP connection in Basic mode if ERTM is enabled but not requested for this connection
RFCOMM: limit RFCOMM MTU by local L2CAP MTU for outgoing connections (only revelvant for ERTM)
L2CAP ERTM: stop timers on disconnect
L2CAP ERTM: fix sending of segmented SDUs
L2CAP ERTM: handle unsupported Information Response
SM: generate local nonce for confirm value in JW+NC+PK in Secure Connections Responder role

Added

btstack_run_loop_base: portable implementation of timer and data source management as base for platform specific implementations

Changed

FreeRTOS: use xQueueCreateStatic (static variant of xQueueCreate) if available for static memory-only setups
L2CAP ERTM: handle invalid Information Response (assume no extended features supported)
POSIX: use monotonic clock as timebase if available
HCI Transport H4/H5/EM9304 SPI: ignore block read/sent from UART driver when closed
HCI: Read Encryption Key Size after encryption was enabled
Errata 11838:
- GAP: gap_set_required_encryption_key_size allows to set the required key size, default = 16 (max)
- GAP: validate encryption key size to emit GAP Security Levels

Changes July 2019

Fixed

SM: Fixed regression introduced in f3582630
L2CAP: avoid reading l2cap signaling command len out of bounds
HCI Transport H4/H5/EM9304 SPI: fix payload size checks (also for 8/16-bit platforms)

Changed

SM: Start encryption upon receiving slave securiy request if bonded
hci: use 2 as HCI_INCOMING_PRE_BUFFER_SIZE in LE-only configuration for GATT Client

Changes June 2019

Changed

FreeRTOS: use freertos/.. prefix to include FreeRTOS headers if HAVE_FREERTOS_INCLUDE_PREFIX is defined
BNEP: add Connection Handle to BNEP_EVENT_CHANNEL_OPENED
Examples: renamed le_counter to gatt_counter and le_streamer to le_streamer_server to indicate support for GATT over BR/EDR

Fixed

BNEP: Bluetooth address is stored in little-endian format for all BNEP_EVENT_*
libusb: avoid use-after-free for SCO packets on disconnect

Added

example: pan_lwip_http_server using lwIP as network stack to implement PAN NAP service
platform/lwip/bnep_lwip.c: BNEP lwIP adapter that forwards packets between BNEP service and lwIP
ENABLE_GATT_OVER_CLASSIC enables support for GATT over BR/EDR in att_server

Changes May 2019

Changed

ESP32: Configure SCO over HCI after power up
btstack_tlv_flash_bank: support targets where a value cannot be overwritten with zero. When ENABLE_TLV_FLASH_EXPLICIT_DELETE_FIELD is defined, an explicit delete field is used to indicate an invalid entry.

Fixed

SM: Avoid potential use-after-free on immediate disconnect (lookup connection via con handle instead of storing pointer)

Added

gatt_client: emit query complete event for signed write operation
hci_transport_h4: add workaround for flow control bug in CYW2070x, enable with ENABLE_CYPRESS_BAUDRATE_CHANGE_FLOWCONTROL_BUG_WORKAROUND

Changes April 2019

Changed

ESP32: use micro-ecc from 3rd-party as esp-idf removed it in their 3.3 release

Fixed

hci: pad LE Scan response with zeroes
SM: store local CSRK
ATT DB: call write callback for validated signed writes
ATT Server: abort signed write validation on incoming new request
Bluetooth SIG web scraping tools updated
libusb: compiles for FreeBSD

Added

Changes March 2019

Changed

use Makefile for stm32-f4discovery-cc256x port
le_device_db: add secure_connection argument to le_device_db_encryption_set and le_device_db_encryption_get

Fixed

SM: Use provided authentication requirements in slave security request

Added

port/stm32-f4discovery-cc256x: add support for built-in MEMS microphone
SM: Track if connection encryption is based on LE Secure Connection pairing
ATT DB: Validate if connection encrypted is based on SC if requested
att_db_util: support ATT_SECURITY_AUTHENTICATED_SC permission flag
GATT Compiler: support READ_AUTHENTICATED and WRITE_AUTHENTICATED permsission flags
ESP32: erase nvs flash is newer nvs version found
libusb: add support for nRF52840-PCA10056 running Zephyr hci_usb example
port/stm32-l073rz-nucleo-em9304 for Nucleo L073RZ with EM9304 DVK, replaces port/stm32-l053r8-nucleo-em9304

Changes February 2019

Changed

example/a2dp_sink_demo: use linear resampling to fix sample rate drift
btstack_audio: split interface into sink and source

Fixed

Crypto: fix lockup when stack is shutdown while waiting for result of HCI Command, e.g. LE Read Local P256 Public Key
SM: Avoid SM_EVENT_PAIRING_COMPLETE with ERROR_CODE_REMOTE_USER_TERMINATED_CONNECTION after successful pairing in responder role

Added

example/a2dp_sink_demo: add target role, support volume control on both devices
example/audio_duplex: playback audio audio source on audio sink (test audio path)
btstack_audio_embedded: implement audio source path

Changes January 2019

Changed

L2CAP: provide channel mode (basic/ertm) and fcs option in L2CAP_EVENT_CHANNEL_OPENED
RFCOMM: support L2CAP ERTM. Callbacks passed to rfcomm_enable_l2cap_ertm() are used to manage ERTM buffers

Added

L2CAP: emit L2CAP_EVENT_ERTM_BUFFER_RELEASED if ERTM buffer not needed/used anymore
L2CAP: add fcs_option to ERTM config l2cap_ertm_config_t
HCI: validate advertisement data length field when generating GAP_EVENT_ADVERTISING_REPORT
ad_parser: validate data element length fields in ad_iterator_has_more
Raspberry Pi 3 A+/B+ port in port/raspi, starts without power cycle

Fixed

HCI: release outgoing buffer on disconnect if waiting to send another ACL fragment
POSIX: use correct baudrate enums for baud rates higher than 921600 (Linux)
Crypto: directly process queued crypto operation on HCI result

Changes December 2018

Added

SM: generate and store ER / IR keys in TLV, unless manually set by application
hci_dump: support PacketLogger or BlueZ format output via SEGGER RTT Channel 1 Up

Fixed

SM: fix internal buffer overrun during random address generation

Changes November 2018

Added

GAP: gap_le_connection_interval provides connection interval for conn handle
Nordic SPP Service Server: GATT service that emulates a serial port over BLE based on Nordic Semiconductor documentation.
uBlox SPP Service Server: GATT service that emulates a serial port over BLE based on uBlox documentation.
SM: ENABLE_LE_CENTRAL_AUTO_ENCRYPTION triggers automatic encryption on connect to bonded devices
SM: generate and store ER / IR keys in TLV, unless manually set by application

Fixed

SM: prevent random address updates if gap_random_address_set was used
SM: fix internal buffer overrun that can cause storing of bonding information to fail
SM: ignore Slave Security Request after sending own Pairing Request
L2CAP: fix use after free on disconnect if ERTM is enabled
HFP: Handle multiple commands/responses in single RFCOMM packet
Memory Pools: clear all buffers before use

Changes October 2018

Added

SDP Server: queue incoming connections when already connected instead of rejecting them
GAP: Support enter/exit sniff mode via gap_sniff_mode_enter/exit. gap_set_default_link_policy_settings is needed to enable sniff mode in general.
HIDS Device: GATT service that exposes HID reports intended for HID Devices, like keyboard and mouse.

Fixed

HCI: fix bug in gap_inquiry_stop that triggered additional GAP_EVENT_INQUIRY_COMPLETE instead of stopping the inquiry
L2CAP: fix issue with outgoing connection before read remote supported complete when other channels exist
L2CAP ERTM: allow SDU of szie MPS in first packet that contains L2CAP SDU Length
L2CAP ERTM: fix memory corruption triggered if local_mtu > mps
L2CAP ERTM: fix outgoing fragment management
HFP: decline incoming RFCOMM connection after outgoing connection was started
AVRCP: fix crash on disconnect of connection established by remote

Changes September 2018

Fixed

HCI: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled
L2CAP: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled
L2CAP: Evaluate 'can send now' on HCI Disconnect as ACL buffers in Bluetooth Controller have been used for the closed connection are freed implicitly
L2CAP: Check can send now before sending extended information requeste needed for ERTM mode
L2CAP: Use valid signaling identifier for L2CAP Connection Parameter Update Request
RFCOMM: Trigger l2cap request to send on rfcomm credits when client is waiting to sendtrigger l2cap request to send on rfcomm credits when client is waiting to send
RFCOMM: Avoid use-after-free on channel finalize
GATT Client: stop timer on disconnect - fixes use after free / crash

Added

A2DP Source: Support stream reconfiguration (a2dp_source_reconfigure_stream_sampling_frequency)
3rd-party: yxml is used for PBAP vCard list parsing
cc256xC: new v1.1 init scripts

Changes August 2018

Added

PBAP: added pbap_get_phonebook_size() to get phonebook entry count

Fixed

GATT Server: Allow enable Notifications/Indication with Write Command. Fixes issue with some Android devices.
SM: fix pairing for Secure Connections with Bonding if remote sends additional keys
SM: drop LTK flag from Pairing Response for Secure Connections
L2CAP: fix emitted L2CAP_EVENT_CONNECTION_PARAMETER_UPDATE_REQUEST

Changes June 2018

Added

btstack_audio.h: application level API for audio playback and recording
embedded/hal_audio.h: low-level API for audio playback and recording
HID Device: hid_device_connect(..) function
ESP32: implement hal_audio
DA14585: support for Dialog Semiconductor DA14585 LE-only controller
Raspberry Pi 3 + Raspberry Pi Zero W port in port/raspi

Changed

Errata 10734:
- SM: Generate new EC Public Keypair after each pairing
- SM: Abort failure with DHKEY_CHECK_FAILED if received public key is invalid (instead of unspecified error)
btstack.h: only include classic headers if ENABLE_CLASSIC is defined
windows: ignore virtual Bluetooth adapter provided by VMware
Replaced HCI_PACKET_BUFFER_SIZE with HCI_INCOMING_PACKET_BUFFER_SIZE and HCI_OUTGOING_PACKET_BUFFER_SIZE

Changes June 2018

Fixed

HFP: Fix Wide Band Speech bit in SDP record for both HF/AG. Missing bit prevents macOS from using mSBC
ATT Server: send ATT_EVENT_HANDLE_VALUE_INDICATION_COMPLETE with status ATT_HANDLE_VALUE_INDICATION_DISCONNECT on disconnect
AVRCP Controller: fix parsing of now playing info

Changed

ATT Server: ATT_HANDLE_VALUE_INDICATION_DISCONNECT is delivered to service handler if registered

Added

ATT Server: packet handler field added to att_service_handler_t to receive: connect/disconnect, atu exchange, indication complete

Changes May 2018

Added

GAP: re-encrypt outgoing connection if bonded
ATT Server: wait until re-encryption is complete
GATT Client: wait until re-encryption is complete
ATT Server: added att_server_request_to_send_notification and att_server_request_to_send_indication
GATT Client: if ENABLE_GATT_CLIENT_PAIRING, GATT Client starts pairing and retry operation on security error

Changed

ATT Server: att_server_register_can_send_now_callback is deprecated, use att_server_request_to_send_notification/indication instead

Fixed

SM: Fix LE Secure Connection pairing in Central role
le_device_db_tlv: fix seq nr management
SM: improve le_device_db lookup and storing of IRK
GATT Server: fix lookup for Client Characteristic Configuration in services with multiple Characteristics
RFCOMM: emit channel closed on HCI/L2CAP disconnect after sending DISC while expecting UA

Changes April 2018

Added

Crypto: btstack_crypo.h provides cryptographic functions for random data generation, AES128, EEC, CBC-MAC (Mesh)
SM: support pairing using Out-of-Band (OOB) data with LE Secure Connections
Embedded: support btstack_stdin via SEGGER RTT

Changed

att_db_util: added security requirement arguments to characteristic creators
SM: use btstack_crypto for cryptographpic functions
GAP: security level for Classic protocols (asides SDP) raised to 2 (encryption)

Fixed

HFP: fix answer call command
HCI: fix buffer overrun in gap_inquiry_explode
SDP: free service record item on sdp_unregister_service

Changes March 2018

Added

GAP: allow to limit number of connections in LE Peripheral role with gap_set_max_number_peripheral_connections
ATT Server: support for delayed ATT read response, see example/att_delayed_read_response.c
ATT Server: allow to specify security requirements seperately for read/writes. .h files need to be regenerated

Fixed

RFCOMM: fix infinite loop on L2CAP connection error (regression from 4c3eeed1)
HSP HS: accept incomming SCO connection
SM: fix iteration over LE Device DB entries for bonding and address resolving
SM: store pairing information only if both devices have requested bonding

Changes February 2018

Added

GATT Client: gatt_client_request_can_write_without_response_event() causes GATT_EVENT_CAN_WRITE_WITHOUT_RESPONSE
SM: new event SM_EVENT_PAIRING_COMPLETE
GAP: support iteration over stored Classic link keys: gap_link_key_iterator_init, gap_link_key_iterator_get_next, gap_link_key_iterator_done
GAP: add gap_delete_all_link_keys

Changed

GATT Client: round robin for multiple connections
ATT Dispatch: round robin for ATT Server & GATT Client
L2CAP: round robin for all L2CAP channels (fixed and dynamic)
btstack_link_key_db: addition functions for link key iteration
GAP: LE scanning enabled not reset on HCI Reset -> can be enabled before HCI Power Up
CSR: set all keys in psram instead of default

Fixed

tc3556x: fix startup after baud rate change

Changes January 2018

Added

Port for Windows with Zephyr HCI Firmware connected via serial port
em9304: upload patch containers during HCI bootup
Makefile for STM32-F4Discovery port
support for console out via SEGGER RTT
LE Data Channels example in BTstack and iOS example on GitHub
LE Streamer Client can send as fast as possbile as well
L2CAP: option to limit ATT MTU via l2cap_set_max_le_mtu

Changed

HCI: allow to set hci_set_master_slave_policy (0: try to become master, 1: accept slave)
GAP: gap_set_connection_parameters includes scan interval and window params
GATT Client: GATT_EVENT_MTU indicates max MTU
ATT DB Util: attribute handle is returned for new Services and Characteristics

Fixed

Windows: retry serial port operations if not all bytes have been read/written
HFP: avoid buffer overflows setting up messages
SBC Decoder: improved error handling for invalid SBC audio data
GAP: fix Connection Parameter Response in Central role
ATT DB Util: update pointer to database in case of realloc
GATT Client: set UUID16 field if 16-bit UUID is stored as UUID128
GAP: release HCI Connnection after gap_le_conne
ATT: Exchanged MTU is propagate to ATT Server and GATT Client

Changes December 2017

Added

Introduced btstack_network.h network interface abstraction
btstack_network_posix implementation using Linux tun/tap interface
WICED: support for btstack_stdin (HAVE_STDIN)
GATT Server: Writes to GATT Client Characteristic Configuration are stored in TLV and restored on reconnect. The db.h file generated from db.gatt needs to be re-created.
TLV: global TLV instance available via btstack_tlv_get_instance() (src/btstack_tlv.h)
TLV: POSIX implementation that appends to a file on disk (platform/posix/btstack_tlv_posix.c
LE Device DB TLV: overwrite oldest entry if no free entries available
SM: allow to set fixed passkey in display role using sm_use_fixed_passkey_in_display_role
Example/hid_host_demo with HID parser and support for basic US keyboard layout
EM9304: custom HCI Transport implementation for EM9304 on top of btstack_em9304_spi.h platform abstraction only requires hal_em9304_spi.h to be implemented for new ports
Port for Apollo2 MCU with EM9304 (ports/apollo2-em9304)

Changed

panu_demo: uses btstack_network.h now
WICED: configure printf to replace Linefeed with CRLF
SBC: split btstack_sbc_bludroid.c into seperate encoder and decoder implementations

Fixed

RFCOMM: support connection requests during connection failure
L2CAP: support connection requests during connection failure
L2CAP: fix default remote MTU as 672 instead of 48 (Minimal MTU)
HCI: avoid double free during halting
SM: fixed reconnect using legacy pairing in slave role

Files

CHANGELOG.md

Latest commit

History

CHANGELOG.md

File metadata and controls

Change Log

Unreleased

Added

Fixed

Changed

Release v1.6.1

Added

Fixed

Changed

Release v1.6

Added

Fixed

Changed

Release v1.5.6

Added

Fixed

Changed

Release v1.5.5

Added

Fixed

Changed

Known Issues

Release v1.5.4

Added

Fixed

Changed

Release v1.5.3

Added

Fixed

Changed

Release v1.5.2

Added

Fixed

Changed

Release v1.5.1

Added

Fixed

Changed

Release v1.5.0

Added

Fixed

Changed

Release v1.4.1

Added

Fixed

Changed

Release v1.4

Added

Fixed

Changed

Release v1.3.2

Added

Fixed

Changed

Release v1.3

Added

Fixed

Changed

Release v1.2.1

Fixed

Changed

Release v1.2

Fixed

Added

Changed

Changes October 2020

Fixed

Added

Changed

Release v1.1

Fixed

Added

Changed

Changes September 2020