DSN-VC288 STM8/Nuvotech 3 digits volt amper meter as NTC thermometer. *C/*F selectable(eeprom).
Requires IAR STM8 for build Not all sources are uploaded.
TODO
- basic temp show
- celsius/farheheit switch(eeprom setting)
- min/max show for day/week/month
- save min/max to eeprom to restore after reboot
- reset min/max eeprom data by holding debug mode button at least 5 sec (user definable) at boot
- data ir/433MHz transmitting(cathode + npn bjt when digit shows nothing)
- debug mode - enable by shorting 2 pins before power on. Show raw adc data