miniP1.yaml

esphome:
  name: minip1
  platform: ESP8266
  board: esp01_1m

dsmr:
  id: dsmr_instance

uart:
  - rx_pin: RX
    baud_rate: 115200
    rx_buffer_size: 1500

sensor:
  - platform: dsmr
    energy_delivered_tariff1:
      name: Energy Consumed Tariff 1
    energy_delivered_tariff2:
      name: Energy Consumed Tariff 2
    energy_returned_tariff1:
      name: Energy Produced Tariff 1
    energy_returned_tariff2:
      name: Energy Produced Tariff 2
    power_delivered:
      name: Power Consumed
    power_returned:
      name: Power Produced
    electricity_failures:
      name: Electricity failures
    electricity_long_failures:
      name: Long Electricity failures
    voltage_l1:
      name: Voltage Phase 1
    voltage_l2:
      name: Voltage Phase 2
    voltage_l3:
      name: Voltage Phase 3
    current_l1:
      name: Current Phase 1
    current_l2:
      name: Current Phase 2
    current_l3:
      name: Current Phase 3
    power_delivered_l1:
      name: Power Consumed Phase 1
    power_delivered_l2:
      name: Power Consumed Phase 2
    power_delivered_l3:
      name: Power Consumed Phase 3
    power_returned_l1:
      name: Power Produced Phase 1
    power_returned_l2:
      name: Power Produced Phase 2
    power_returned_l3:
      name: Power Produced Phase 3
    #gas_delivered:
    #  name: Gas Consumed

text_sensor:
  - platform: dsmr
    identification:
      name: "DSMR Identification"
    p1_version:
      name: "DSMR Version"


# Disable logging (uses the same uart as P1)
logger:
  level: WARN
  baud_rate: 0
  
# Enable Home Assistant API
api:

ota:
  #password: "SomeOtaPassword"

wifi:
  #ssid: WiFi
  #password: secret

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "ESPHOME-P1"
    password: "configesp"

captive_portal: