opu_cam8_readme.txt

cam

Purpose:
  Ïðîãðàììà äëÿ èçìåíåíèÿ ïàðàìåòðîâ îïåðàöèè.
  Ìåíÿåò òèï äâèæåíèÿ (âñòðå÷íîå<->ïîïóòíîå).

Requirements for this package:
  UG V17/V18/NX1/NX2/....
  WindowsNT/2000/XP
  UG/Gateway
  UG/Manufacturing
  UG/Open API Execute
  UG/Grip
  UG/Grip Execute

Restrictions:
  not

Author:
  ֌
 

Quick installation:
   Move 'cam.dll cam.grx' to one of the following directories:
     %UGII_USER_DIR%\application 
     %UGII_SITE_DIR%\application 
     %UGII_VENDOR_DIR%\application 
  - for calling 'cam.dll' via File->Execute UG/Open->User Function or User Tool.

  The required enironment-variable (i.e. UGII_USER_DIR or UGII_SITE_DIR or
  UGII_VENDOR_DIR) must be set properly on your system.

Most common problem:
  ïðîáëåìà áûëà îáíàðóæåíà ïðè ñîçäàíèè.
  Ñóòü : åñòü ãðóïïà ðàçíîðîäíûõ îïåðàöèé
   Fixed
   Planar
   Cavity
    êàæäàÿ èç íèõ èìååò ïàðàìåòðû
     Cut Flag           =  Conventional
     Cut Direction Flag =  Climb
     Cut Direction      =  Forward

    ñðåäñòâàìè UG/Open, èñïîëüçóÿ ïàðàìåòð UF_PARAM_CUT_DIR_TYPE
    ìåíÿåòñÿ òîëüêî 'Cut Flag', è ôàêòè÷åñêè ïðîèñõîäèò èçìåíåíèå òèïà ðåçàíèÿ
    òîëüêî â îïåðàöèÿõ òèïà Fixed. Â îïåðàöèõ Planar èçìåíÿåòñÿ 'Cut Flag',íî 
    'Cut Direction Flag' íå èçìåíÿåòñÿ (êàê áûëî 'âñòðå÷íîå' òàê è îñòàëîñÿ(íàïðèìåð)).
    äëÿ èçìåíåíèÿ äàííîãî ïàðàìåòðà áûëà íàïèñàíà äîïîëíèòåëüíàÿ ïðîãðàììà íà Grip, 
    âûçûâàåìàÿ èç UG/Open (.dll).

  MILL_PLANAR 
    FACE_MILLING     (261)  -
    PLANAR_MILL      (110)  +
  MILL_CONTOUR
    CAVITY_MILL      (260)  +
    FIXED_CONTOUR    (210)  +
    PLUNGE_MILLING   (265)  -
    ZLEVEL_PROFILE   (263)  -
  MILL_MULTI-AXIS
    VARIABLE_CONTOUR (265)  +
    SEQUENTIAL_MILL  (265)  -


Copyright & remarks:
  Thanks to my collegs.
  If you have added an interesting enhancement/port or want to report
  an error, please contact the author at mail

History:
  29-june-2007: V1.0.0, Initial release V1.0, UG V18