config.yaml

# Port to listen on for posts.  Use 80 for regular HTTP or if you're
# redirecting traffic using a bridge, use that port.
http_port: 22041

# Firmware revision to report to the bridge.
firmware_rev: 224

#----------------------------------------------------------------
mqtt:
  host: 127.0.0.1
  port: 1883
  username:
  password:

  # Message publishing options.
  qos: 0
  retain: 0

  # MQTT topics to publish acurite data under.  The actual topic will
  # be the input value with the sensor location string appended to it.
  # So 'env/temp' becomes 'env/temp/living room'.
  topic_battery: "power/battery"
  topic_rssi: "radio"
  topic_humidity: "env/humidity"
  topic_temp: "env/temp"
  topic_wind_speed: "env/wind/speed"
  topic_wind_dir: "env/wind/direction"
  topic_barometer: "env/barometer"
  topic_rain: "env/rain"

#----------------------------------------------------------------

# Sensor locations.  Labels are used in the MQTT topics.  All temp
# sensors report humidity even if they don't measure it.  Set
# humidity: true for any sensor that actually has a humidity sensor -
# othewrise it will be ignored.  The sensor name (numeric ID) field
# can be found be setting the log level to INFO and watching what's
# being posted (find the 'sensor' tag value).
sensors:
  - "00005125":
      label: "Living Room"
  - "00001948":
      label: "Master Bedroom"
  - "00009338":
      label: "Kitchen"
  - "00002717":
      label: "Den"
  - "00005450":
      label: "Media Room"
  - "00016039":
      label: "Basement"
  - "00008628":
      label: "Guest Bedroom"
  - "00009096":
      label: "Lower Deck"
      humidity: true
  - "00006978":
      label: "Crawl Space"
      humidity: true