Introduction

CoreMark's primary goals are simplicity and providing a method for testing only a processor's core features. For more information about EEMBC's comprehensive embedded benchmark suites, please see www.eembc.org.

Building and Running

To build and run the benchmark, type

> make

Full results are available in the files run1.log and run2.log. CoreMark result can be found in run1.log.

Cross Compiling

For cross compile platforms please adjust core_portme.mak, core_portme.h (and possibly core_portme.c) according to the specific platform used. When porting to a new platform, it is recommended to copy one of the default port folders (e.g. mkdir <platform> && cp linux/* <platform>), adjust the porting files, and run:

% make PORT_DIR=<platform>

Make Targets

run - Default target, creates run1.log and run2.log. run1.log - Run the benchmark with performance parameters, and output to run1.log run2.log - Run the benchmark with validation parameters, and output to run2.log run3.log - Run the benchmark with profile generation parameters, and output to run3.log compile - compile the benchmark executable link - link the benchmark executable check - test MD5 of sources that may not be modified clean - clean temporary files

Make flag: `ITERATIONS`

By default, the benchmark will run between 10-100 seconds. To override, use ITERATIONS=N

% make ITERATIONS=10

Will run the benchmark for 10 iterations. It is recommended to set a specific number of iterations in certain situations e.g.:

Running with a simulator
Measuring power/energy
Timing cannot be restarted

Minimum required run time: Results are only valid for reporting if the benchmark ran for at least 10 secs!

Make flag: `XCFLAGS`

To add compiler flags from the command line, use XCFLAGS e.g.:

% make XCFLAGS="-g -DMULTITHREAD=4 -DUSE_FORK=1"

Make flag: `CORE_DEBUG`

Define to compile for a debug run if you get incorrect CRC.

% make XCFLAGS="-DCORE_DEBUG=1"

Make flag: `REBUILD`

Force a rebuild of the executable.

Systems Without `make`

The following files need to be compiled:

core_list_join.c
core_main.c
core_matrix.c
core_state.c
core_util.c
PORT_DIR/core_portme.c

For example:

% gcc -O2 -o coremark.exe core_list_join.c core_main.c core_matrix.c core_state.c core_util.c simple/core_portme.c -DPERFORMANCE_RUN=1 -DITERATIONS=1000
% ./coremark.exe > run1.log

The above will compile the benchmark for a performance run and 1000 iterations. Output is redirected to run1.log.

Parallel Execution

Use XCFLAGS=-DMULTITHREAD=N where N is number of threads to run in parallel. Several implementations are available to execute in multiple contexts, or you can implement your own in core_portme.c.

% make XCFLAGS="-DMULTITHREAD=4 -DUSE_PTHREAD"

Above will compile the benchmark for execution on 4 cores, using POSIX Threads API.

Run Parameters for the Benchmark Executable

CoreMark's executable takes several parameters as follows (but only if main() accepts arguments): 1st - A seed value used for initialization of data. 2nd - A seed value used for initialization of data. 3rd - A seed value used for initialization of data. 4th - Number of iterations (0 for auto : default value) 5th - Reserved for internal use. 6th - Reserved for internal use. 7th - For malloc users only, ovreride the size of the input data buffer.

The run target from make will run coremark with 2 different data initialization seeds.

Alternative parameters:

If not using malloc or command line arguments are not supported, the buffer size for the algorithms must be defined via the compiler define TOTAL_DATA_SIZE. TOTAL_DATA_SIZE must be set to 2000 bytes (default) for standard runs. The default for such a target when testing different configurations could be:

% make XCFLAGS="-DTOTAL_DATA_SIZE=6000 -DMAIN_HAS_NOARGC=1"

Submitting Results

CoreMark results can be submitted on the web. Open a web browser and go to https://www.eembc.org/coremark/login.php?url=enter_score.php. After registering an account you may enter a score.

Run Rules

What is and is not allowed.

Required

The benchmark needs to run for at least 10 seconds.
All validation must succeed for seeds 0,0,0x66 and 0x3415,0x3415,0x66, buffer size of 2000 bytes total.
- If not using command line arguments to main:

	% make XCFLAGS="-DPERFORMANCE_RUN=1" REBUILD=1 run1.log
	% make XCFLAGS="-DVALIDATION_RUN=1" REBUILD=1 run2.log

If using profile guided optimization, profile must be generated using seeds of 8,8,8, and buffer size of 1200 bytes total.

    % make XCFLAGS="-DTOTAL_DATA_SIZE=1200 -DPROFILE_RUN=1" REBUILD=1 run3.log

All source files must be compiled with the same flags.
All data type sizes must match size in bits such that:
- ee_u8 is an unsigned 8-bit datatype.
- ee_s16 is a signed 16-bit datatype.
- ee_u16 is an unsigned 16-bit datatype.
- ee_s32 is a signed 32-bit datatype.
- ee_u32 is an unsigned 32-bit datatype.

Allowed

Changing number of iterations
Changing toolchain and build/load/run options
Changing method of acquiring a data memory block
Changing the method of acquiring seed values
Changing implementation in core_portme.c
Changing configuration values in core_portme.h
Changing core_portme.mak

NOT ALLOWED

Changing of source file other then core_portme* (use make check to validate)

Reporting rules

Use the following syntax to report results on a data sheet:

CoreMark 1.0 : N / C [/ P] [/ M]

N - Number of iterations per second with seeds 0,0,0x66,size=2000)

C - Compiler version and flags

P - Parameters such as data and code allocation specifics

This parameter may be omitted if all data was allocated on the heap in RAM.
This parameter may not be omitted when reporting CoreMark/MHz

M - Type of parallel execution (if used) and number of contexts

This parameter may be omitted if parallel execution was not used.

e.g.:

CoreMark 1.0 : 128 / GCC 4.1.2 -O2 -fprofile-use / Heap in TCRAM / FORK:2

or

CoreMark 1.0 : 1400 / GCC 3.4 -O4

If reporting scaling results, the results must be reported as follows:

CoreMark/MHz 1.0 : N / C / P [/ M]

P - When reporting scaling results, memory parameter must also indicate memory frequency:core frequency ratio.

If the core has cache and cache frequency to core frequency ratio is configurable, that must also be included.

e.g.:

CoreMark/MHz 1.0 : 1.47 / GCC 4.1.2 -O2 / DDR3(Heap) 30:1 Memory 1:1 Cache

Log File Format

The log files have the following format

2K performance run parameters for coremark.	(Run type)
CoreMark Size    	: 666					(Buffer size)
Total ticks			: 25875					(platform dependent value)
Total time (secs) 	: 25.875000				(actual time in seconds)
Iterations/Sec 		: 3864.734300			(Performance value to report)
Iterations			: 100000				(number of iterations used)
Compiler version	: GCC3.4.4				(Compiler and version)	
Compiler flags		: -O2					(Compiler and linker flags)
Memory location		: Code in flash, data in on chip RAM
seedcrc				: 0xe9f5				(identifier for the input seeds)
[0]crclist			: 0xe714				(validation for list part)
[0]crcmatrix		: 0x1fd7				(validation for matrix part)
[0]crcstate			: 0x8e3a				(validation for state part)
[0]crcfinal			: 0x33ff				(iteration dependent output)
Correct operation validated. See README.md for run and reporting rules.  (*Only when run is successful*)
CoreMark 1.0 : 6508.490622 / GCC3.4.4 -O2 / Heap 						  (*Only on a successful performance run*)

Theory of Operation

This section describes the initial goals of CoreMark and their implementation.

Small and easy to understand

X number of source code lines for timed portion of the benchmark.
Meaningful names for variables and functions.
Comments for each block of code more than 10 lines long.

Portability

A thin abstraction layer will be provided for I/O and timing in a separate file. All I/O and timing of the benchmark will be done through this layer.

Code / data size

Compile with gcc on x86 and make sure all sizes are according to requirements.
If dynamic memory allocation is used, take total memory allocated into account as well.
Avoid recursive functions and keep track of stack usage.
Use the same memory block as data site for all algorithms, and initialize the data before each algorithm – while this means that initialization with data happens during the timed portion, it will only happen once during the timed portion and so have negligible effect on the results.

Controlled output

This may be the most difficult goal. Compilers are constantly improving and getting better at analyzing code. To create work that cannot be computed at compile time and must be computed at run time, we will rely on two assumptions:

Some system functions (e.g. time, scanf) and parameters cannot be computed at compile time. In most cases, marking a variable volatile means the compiler is force to read this variable every time it is read. This will be used to introduce a factor into the input that cannot be precomputed at compile time. Since the results are input dependent, that will make sure that computation has to happen at run time.
Either a system function or I/O (e.g. scanf) or command line parameters or volatile variables will be used before the timed portion to generate data which is not available at compile time. Specific method used is not relevant as long as it can be controlled, and that it cannot be computed or eliminated by the compiler at compile time. E.g. if the clock() functions is a compiler stub, it may not be used. The derived values will be reported on the output so that verification can be done on a different machine.
We cannot rely on command line parameters since some embedded systems do not have the capability to provide command line parameters. All 3 methods above will be implemented (time based, scanf and command line parameters) and all 3 are valid if the compiler cannot determine the value at compile time.
It is important to note that The actual values that are to be supplied at run time will be standardized. The methodology is not intended to provide random data, but simply to provide controlled data that cannot be precomputed at compile time.
Printed results must be valid at run time. This will be used to make sure the computation has been executed.
Some embedded systems do not provide “printf” or other I/O functionality. All I/O will be done through a thin abstraction interface to allow execution on such systems (e.g. allow output via JTAG).

Key Algorithms

Linked List

The following linked list structure will be used:

typedef struct list_data_s {
	ee_s16 data16;
	ee_s16 idx;
} list_data;

typedef struct list_head_s {
	struct list_head_s *next;
	struct list_data_s *info;
} list_head;

While adding a level of indirection accessing the data, this structure is realistic and used in many embedded applications for small to medium lists.

The list itself will be initialized on a block of memory that will be passed in to the initialization function. While in general linked lists use malloc for new nodes, embedded applications sometime control the memory for small data structures such as arrays and lists directly to avoid the overhead of system calls, so this approach is realistic.

The linked list will be initialized such that 1/4 of the list pointers point to sequential areas in memory, and 3/4 of the list pointers are distributed in a non sequential manner. This is done to emulate a linked list that had add/remove happen for a while disrupting the neat order, and then a series of adds that are likely to come from sequential memory locations.

For the benchmark itself:

Multiple find operations are going to be performed. These find operations may result in the whole list being traversed. The result of each find will become part of the output chain.
The list will be sorted using merge sort based on the data16 value, and then derive CRC of the data16 item in order for part of the list. The CRC will become part of the output chain.
The list will be sorted again using merge sort based on the idx value. This sort will guarantee that the list is returned to the primary state before leaving the function, so that multiple iterations of the function will have the same result. CRC of the data16 for part of the list will again be calculated and become part of the output chain.

The actual data16 in each cell will be pseudo random based on a single 16b input that cannot be determined at compile time. In addition, the part of the list which is used for CRC will also be passed to the function, and determined based on an input that cannot be determined at run time.

Matrix Multiply

This very simple algorithm forms the basis of many more complex algorithms. The tight inner loop is the focus of many optimizations (compiler as well as hardware based) and is thus relevant for embedded processing.

The total available data space will be divided to 3 parts:

NxN matrix A.
NxN matrix B.
NxN matrix C.

E.g. for 2K we will have 3 12x12 matrices (assuming data type of 32b 12(len)*12(wid)*4(size)*3(num) =1728 bytes).

Matrix A will be initialized with small values (upper 3/4 of the bits all zero). Matrix B will be initialized with medium values (upper half of the bits all zero). Matrix C will be used for the result.

For the benchmark itself:

Multiple A by a constant into C, add the upper bits of each of the values in the result matrix. The result will become part of the output chain.
Multiple A by column X of B into C, add the upper bits of each of the values in the result matrix. The result will become part of the output chain.
Multiple A by B into C, add the upper bits of each of the values in the result matrix. The result will become part of the output chain.

The actual values for A and B must be derived based on input that is not available at compile time.

State Machine

This part of the code needs to exercise switch and if statements. As such, we will use a small Moore state machine. In particular, this will be a state machine that identifies string input as numbers and divides them according to format.

The state machine will parse the input string until either a “,” separator or end of input is encountered. An invalid number will cause the state machine to return invalid state and a valid number will cause the state machine to return with type of number format (int/float/scientific).

This code will perform a realistic task, be small enough to easily understand, and exercise the required functionality. The other option used in embedded systems is a mealy based state machine, which is driven by a table. The table then determines the number of states and complexity of transitions. This approach, however, tests mainly the load/store and function call mechanisms and less the handling of branches. If analysis of the final results shows that the load/store functionality of the processor is not exercised thoroughly, it may be a good addition to the benchmark (codesize allowing).

For input, the memory block will be initialized with comma separated values of mixed formats, as well as invalid inputs.

For the benchmark itself:

Invoke the state machine on all of the input and count final states and state transitions. CRC of all final states and transitions will become part of the output chain.
Modify the input at intervals (inject errors) and repeat the state machine operation.
Modify the input back to original form.

The actual input must be initialized based on data that cannot be determined at compile time. In addition the intervals for modification of the input and the actual modification must be based on input that cannot be determined at compile time.

Validation

This release was tested on the following platforms:

x86 cygwin and gcc 3.4 (Quad, dual and single core systems)
x86 linux (Ubuntu/Fedora) and gcc (4.2/4.1) (Quad and single core systems)
MIPS64 BE linux and gcc 3.4 16 cores system
MIPS32 BE linux with CodeSourcery compiler 4.2-177 on Malta/Linux with a 1004K 3-core system
PPC simulator with gcc 4.2.2 (No OS)
PPC 64b BE linux (yellowdog) with gcc 3.4 and 4.1 (Dual core system)
BF533 with VDSP50
Renesas R8C/H8 MCU with HEW 4.05
NXP LPC1700 armcc v4.0.0.524
NEC 78K with IAR v4.61
ARM simulator with armcc v4

Memory Analysis

Valgrind 3.4.0 used and no errors reported.

Balance Analysis

Number of instructions executed for each function tested with cachegrind and found balanced with gcc and -O0.

Statistics

Lines:

Lines  Blank  Cmnts  Source     AESL     
=====  =====  =====  =====  ==========  =======================================
  469     66    170    251       627.5  core_list_join.c  (C)
  330     18     54    268       670.0  core_main.c  (C)
  256     32     80    146       365.0  core_matrix.c  (C)
  240     16     51    186       465.0  core_state.c  (C)
  165     11     20    134       335.0  core_util.c  (C)
  150     23     36     98       245.0  coremark.h  (C)
 1610    166    411   1083      2707.5  ----- Benchmark -----  (6 files)
  293     15     74    212       530.0  linux/core_portme.c  (C)
  235     30    104    104       260.0  linux/core_portme.h  (C)
  528     45    178    316       790.0  ----- Porting -----  (2 files)
 
* For comparison, here are the stats for Dhrystone
Lines  Blank  Cmnts  Source     AESL     
=====  =====  =====  =====  ==========  =======================================
  311     15    242     54       135.0  dhry.h  (C)
  789    132    119    553      1382.5  dhry_1.c  (C)
  186     26     68    107       267.5  dhry_2.c  (C)
 1286    173    429    714      1785.0  ----- C -----  (3 files)

Credits

Many thanks to all of the individuals who helped with the development or testing of CoreMark including (Sorted by company name; note that company names may no longer be accurate as this was written in 2009).

Alan Anderson, ADI
Adhikary Rajiv, ADI
Elena Stohr, ARM
Ian Rickards, ARM
Andrew Pickard, ARM
Trent Parker, CAVIUM
Shay Gal-On, EEMBC
Markus Levy, EEMBC
Peter Torelli, EEMBC
Ron Olson, IBM
Eyal Barzilay, MIPS
Jens Eltze, NEC
Hirohiko Ono, NEC
Ulrich Drees, NEC
Frank Roscheda, NEC
Rob Cosaro, NXP
Shumpei Kawasaki, RENESAS

Legal

Please refer to LICENSE.md in this reposity for a description of your rights to use this code.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

Introduction

Building and Running

Cross Compiling

Make Targets

Make flag: `ITERATIONS`

Make flag: `XCFLAGS`

Make flag: `CORE_DEBUG`

Make flag: `REBUILD`

Systems Without `make`

Parallel Execution

Run Parameters for the Benchmark Executable

Alternative parameters:

Submitting Results

Run Rules

Required

Allowed

NOT ALLOWED

Reporting rules

Log File Format

Theory of Operation

Small and easy to understand

Portability

Code / data size

Controlled output

Key Algorithms

Linked List

Matrix Multiply

State Machine

Validation

Memory Analysis

Balance Analysis

Statistics

Credits

Legal

Copyright

Files

README.md

Latest commit

History

README.md

File metadata and controls

Introduction

Building and Running

Cross Compiling

Make Targets

Make flag: ITERATIONS

Make flag: XCFLAGS

Make flag: CORE_DEBUG

Make flag: REBUILD

Systems Without make

Parallel Execution

Run Parameters for the Benchmark Executable

Alternative parameters:

Submitting Results

Run Rules

Required

Allowed

NOT ALLOWED

Reporting rules

Log File Format

Theory of Operation

Small and easy to understand

Portability

Code / data size

Controlled output

Key Algorithms

Linked List

Matrix Multiply

State Machine

Validation

Memory Analysis

Balance Analysis

Statistics

Credits

Legal

Copyright

Make flag: `ITERATIONS`

Make flag: `XCFLAGS`

Make flag: `CORE_DEBUG`

Make flag: `REBUILD`

Systems Without `make`