orca slicer err

[65294f]

I've recently got into 3d printing and downloaded orca slicer and selected the the any cubic Kobra 2 and as soon as I started a project it gave me the err code
Error:
Relative extruder addressing requires resetting the extruder position at each layer to prevent loss of floating point accuracy. Add "G92 E0" to layer_gcode.
Jump to (before_layer_change_gcode)

[genuineted]

I think I can help with this. I see this error with my by Kobra Plus (prior gen to the Kobra 2).

1. Under the Prepare section, go to the printer's settings. Look for the generic "edit" icon to the right of the name of your current printer selection.
2. In Printer Settings, enable Advanced.
3. Click "Machine G-Code".
4. Scroll to "Before layer change G-Code" section.
5. Insert the code into that section.

Mine looks like this:
;BEFORE_LAYER_CHANGE ;G92 E0.0 ;[layer_z]

For the devs:

1. I found that the link in the error message does not work. (OrcaSlicer 2.1.0 beta for Mac x86)
2. The code addition recommended in the error message was already inserted into the G-Code field above. The difference is that the message recommended G92 E0 and the code present was G92 E0.0.