Register

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/48454

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.0 -m "<description of version>" 3faad0e6bac1890878f985537f1dfe9fc22a5e4e
git push origin v0.1.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/51103

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.1 -m "<description of version>" 2b91700050a152e1ba93b755322a7205e4d39e39
git push origin v0.1.1

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/58999

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v1.0.0 -m "<description of version>" 4c5789890f4d43c2759f8a1fcbd55c5670ebd0e9
git push origin v1.0.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/59010

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v1.1.0 -m "<description of version>" bdb20b5f37dda0c254b5c7e6e7d84ca02dc499f7
git push origin v1.1.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/60711

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v1.4.0 -m "<description of version>" 7d7901b6020ecfae79b74f067351d8cd408fd44f
git push origin v1.4.0

Also, note the warning: Version 1.4.0 skips over 1.2.0
This can be safely ignored. However, if you want to fix this you can do so. Call register() again after making the fix. This will update the Pull request.

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/60713

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v1.2.0 -m "<description of version>" 5ff99e55fe519023c57dd5d50250dd441614d5aa
git push origin v1.2.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/61658

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v1.3.0 -m "<description of version>" 64126f4858832528f2d8b41ceabfc7f10f86658d
git push origin v1.3.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/61662

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v1.3.1 -m "<description of version>" 66d11d3bb4aa6cfdd52f330a07aedc7fecc51d81
git push origin v1.3.1

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/62013

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v1.4.1 -m "<description of version>" 2f830977061ecb2562a8228829fce49492579ca4
git push origin v1.4.1

Also, note the warning: Version 1.4.1 skips over 1.4.0
This can be safely ignored. However, if you want to fix this you can do so. Call register() again after making the fix. This will update the Pull request.

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/62014

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v1.4.0 -m "<description of version>" 538fb2b1156c28c71524a8b18fdf9bd07545e39d
git push origin v1.4.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/111609

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v2.9.0 -m "<description of version>" 3d5997bcf45c380e8ee5eddc1c13b4e31ccb77f4
git push origin v2.9.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/111822

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v2.10.0 -m "<description of version>" 791b2274be16dfe26029c6fe5f90ad90fc37278f
git push origin v2.10.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/112886

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v2.11.0 -m "<description of version>" 4ef5e82b7fbea0874872f931f90f5d25a5a298fc
git push origin v2.11.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/115033

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v2.12.0 -m "<description of version>" f839b67374684b70e50017d734bc125fcf1d53a6
git push origin v2.12.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/115935

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v2.14.0 -m "<description of version>" efdff2fda2840a1de306d6087be05a7875b6b116
git push origin v2.14.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/116588

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v2.15.0 -m "<description of version>" 37b5157a02a2e468e943a66409d8457551e69c45
git push origin v2.15.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/117392

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v2.15.1 -m "<description of version>" 134df80270c9e0f52a8b6489e6d3c0b85a8762b1
git push origin v2.15.1

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/117656

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v2.16.0 -m "<description of version>" 1cef2c15dc4154d43f85ed6ce20cf1794e80a778
git push origin v2.16.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/118460

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v2.17.0 -m "<description of version>" 5ff27c8cb58439d2b38703af989f0befd593ae1a
git push origin v2.17.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/121051

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v2.18.0 -m "<description of version>" be8d22ff4eaa7e257ac4f408c34c8fdc54d14359
git push origin v2.18.0