SchemaValidations

SchemaValidations is an ActiveRecord extension that keeps your model class definitions simpler and more DRY, by automatically defining validations based on the database schema.

Overview

One of the great things about Rails (ActiveRecord, in particular) is that it inspects the database and automatically defines accessors for all your columns, keeping your model class definitions simple and DRY. That's great for simple data columns, but where it falls down is when your table contains constraints.

create_table :users do |t|
    t.string :email, null: false, limit: 30
    t.boolean :confirmed, null: false
end

In that case the constraints null: false, limit: 30 and :boolean must be validated on the model level, to avoid ugly database exceptions:

class User < ActiveRecord::Base
    validates :email, presence: true, length: { maximum: 30 }
    validates :confirmed, presence: true, inclusion: { in: [true, false] }
end

...which isn't the most DRY approach.

SchemaValidations aims to DRY up your models, doing that boring work for you. It inspects the database and automatically creates validations based on the schema. After installing it your model is as simple as it can be.

class User < ActiveRecord::Base
end

Validations are there but they are created by schema_validations under the hood.

Installation

Simply add schema_validations to your Gemfile.

gem "schema_validations"

Which validations are covered?

Constraints:

Constraint	Validation
`null: false`	`validates ... presence: true`
`limit: 100`	`validates ... length: { maximum: 100 }`
`unique: true`	`validates ... uniqueness: true`
`unique: true, case_sensitive: false` (If schema_plus_pg_indexes is also in use)	`validates ... uniqueness: { case_sensitive: false }`

Data types:

Type	Validation
`:boolean`	`:validates ... inclusion: { in: [true, false] }`
`:float`	`:validates ... numericality: true`
`:integer`	`:validates ... numericality: { only_integer: true, greater_than_or_equal_to: ..., less_than: ... }`
`:decimal, precision: ...`	`:validates ... numericality: { greater_than: ..., less_than: ... }`

What if I want something special?

SchemaValidations' behavior can be configured globally and per-model.

Global configuration

In an initializer, such as config/initializers/schema_validations.rb, you can set any of these options. The default values are shown.

SchemaValidations.setup do |config|

    # Whether to automatically create validations based on database constraints.
    # (Can be set false globally to disable the gem by default, and set true per-model to enable.)
    config.auto_create = true
    
    # Restricts the set of field names to include in automatic validation.
    # Value is a single name, an array of names, or nil.
    config.only = nil

    # Restricts the set of validation types to include in automatic validation.
    # Value is a single type, an array of types, or nil.
    # A type is specified as, e.g., `:validates_presence_of` or simply `:presence`.
    config.only_type = nil
    
    # A list of field names to exclude from automatic validation.
    # Value is a single name, an array of names, or nil.
    # (Providing a value per-model will completely replace a globally-configured list)
    config.except = nil
    
    # A list of validation types to exclude from automatic validation.
    # Value is a single type, an array of types, or nil.
    # (Providing a value per-model will completely replace a globally-configured list)
    config.except_type = nil
       
    # The base set of field names to always exclude from automatic validation.
    # Value is a single name, an array of names, or nil.
    # (This whitelist applies after all other considerations, global or per-model)
    config.whitelist = [:created_at, :updated_at, :created_on, :updated_on]
       
    # The base set of validation types to always exclude from automatic validation.
    # Value is a single type, an array of types, or nil.
    # (This whitelist applies after all other considerations, global or per-model)
    config.whitelist_type = nil
end

Per-model validation

You can override the global configuration per-model, using the schema_validations class method. All global configuration options are available as keyword options. For example:

Disable per model:

class User < ActiveRecord::Base
    schema_validations auto_create: false
end

Use a custom validation rather than schema_validations automatic default:

class User < ActiveRecord::Base
    schema_validations except: :email  # don't create default validation for email
    validates :email, presence: true, length: { in: 5..30 }
end

Include validations every field, without a whitelist:

class User < ActiveRecord::Base
    schema_validations whitelist: nil
end

How do I know what it did?

If you're curious (or dubious) about what validations SchemaValidations defines, you can check the log file. For every assocation that SchemaValidations defines, it generates a debug entry in the log such as

[schema_validations] Article.validates_length_of :title, :allow_nil=>true, :maximum=>50

which shows the exact validation definition call.

SchemaValidations defines the validations lazily for each class, only creating them when they are needed (in order to validate a record of the class, or in response to introspection on the class). So you may need to search through the log file for "schema_validations" to find all the validations, and some classes' validations may not be defined at all if they were never needed for the logged use case.

Compatibility

As of version 1.2.0, SchemaValidations supports and is tested on:

ruby 2.5 with activerecord 5.2, using mysql2, postgresql:9.6 or sqlite3
ruby 2.5 with activerecord 6.0, using mysql2, postgresql:9.6 or sqlite3
ruby 2.5 with activerecord 6.1, using mysql2, postgresql:9.6 or sqlite3
ruby 2.7 with activerecord 5.2, using mysql2, postgresql:9.6 or sqlite3
ruby 2.7 with activerecord 6.0, using mysql2, postgresql:9.6 or sqlite3
ruby 2.7 with activerecord 6.1, using mysql2, postgresql:9.6 or sqlite3
ruby 2.7 with activerecord 7.0, using mysql2, postgresql:9.6 or sqlite3
ruby 3.0 with activerecord 6.0, using mysql2, postgresql:9.6 or sqlite3
ruby 3.0 with activerecord 6.1, using mysql2, postgresql:9.6 or sqlite3
ruby 3.0 with activerecord 7.0, using mysql2, postgresql:9.6 or sqlite3
ruby 3.1 with activerecord 6.0, using mysql2, postgresql:9.6 or sqlite3
ruby 3.1 with activerecord 6.1, using mysql2, postgresql:9.6 or sqlite3
ruby 3.1 with activerecord 7.0, using mysql2, postgresql:9.6 or sqlite3

Earlier versions of SchemaValidations supported:

rails 3.2, 4.1, and 4.2.0
MRI ruby 1.9.3 and 2.1.5

Release Notes

2.4.1

Add AR 6.1 and 7.0
add ruby 3.1

2.4.0

Add AR 6.0
Add Ruby 3.0
Remove support for AR < 5.2
Remove support for Ruby < 2.5

2.3.0

Works with AR 5.1.
No longer testing rails 4.2

2.2.1

Bug fix: don't create presence validation for null: false with a default defined (#18, #49)

2.2.0

Works with AR 5.0. Thanks to @plicjo.
Works with :money type
Bug fix when logger is nil. Thanks to @gamecreature.

2.1.1

Bug fix for :decimal when precision is nil (#37)

2.1.0

Added :decimal range validation. Thanks to @felixbuenemann

2.0.2

Use schema_monkey rather than Railties

2.0.1

Bug fix: Don't crash when optimistic locking is in use (#8)

2.0.0

This major version is backwards compatible for most uses. Only those who specified a per-model :except clause would be affected.

Add whitelist configuration option (thanks to @allenwq). Previously, overriding :except per-model would clobber the default values. E.g. using the documented example except: :mail would accidentally cause validations to be issued updated_at to be validated. Now :except works more naturally. This is however technically a breaking change, hence the version bump.

1.4.0

Add support for case-insensitive uniqueness. Thanks to allenwq

1.3.1

Change log level from 'info' to 'debug', since there's no need to clutter production logs with this sort of development info. Thanks to @obduk

1.3.0

Add range checks to integer validations. Thanks to @lowjoel

1.2.0

No longer pull in schema_plus's auto-foreign key behavior. Limited to AR >= 4.2.1

1.1.0

Works with Rails 4.2.

1.0.1

Fix enums in Rails 4.1. Thanks to @lowjoel

1.0.0

Works with Rails 4.0. Thanks to @davll
No longer support Rails < 3.2 or Ruby < 1.9.3

0.2.2

Rails 2.3 compatibility (check for Rails::Railties symbol). thanks to https://github.com/thehappycoder

0.2.0

New feature: ActiveRecord#validators and ActiveRecord#validators_on now ensure schema_validations are loaded

History

SchemaValidations is derived from the "Red Hill On Rails" plugin schema_validations originally created by harukizaemon (https://github.com/harukizaemon)
SchemaValidations was created in 2011 by Michał Łomnicki and Ronen Barzel

Testing

Are you interested in contributing to schema_validations? Thanks! Please follow the standard protocol: fork, feature branch, develop, push, and issue pull request.

Some things to know about to help you develop and test:

schema_dev: SchemaValidations uses schema_dev to facilitate running rspec tests on the matrix of ruby, activerecord, and database versions that the gem supports, both locally and on github actions

To to run rspec locally on the full matrix, do:
```
  $ schema_dev bundle install
  $ schema_dev rspec
```
You can also run on just one configuration at a time; For info, see schema_dev --help or the schema_dev README.

The matrix of configurations is specified in schema_dev.yml in the project root.

Code coverage results will be in coverage/index.html -- it should be at 100% coverage.

License

This gem is released under the MIT license.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

SchemaValidations

Overview

Installation

Which validations are covered?

What if I want something special?

Global configuration

Per-model validation

Disable per model:

Use a custom validation rather than schema_validations automatic default:

Include validations every field, without a whitelist:

How do I know what it did?

Compatibility

Release Notes

2.4.1

2.4.0

2.3.0

2.2.1

2.2.0

2.1.1

2.1.0

2.0.2

2.0.1

2.0.0

1.4.0

1.3.1

1.3.0

1.2.0

1.1.0

1.0.1

1.0.0

0.2.2

0.2.0

History

Testing

License

Files

README.md

Latest commit

History

README.md

File metadata and controls

SchemaValidations

Overview

Installation

Which validations are covered?

What if I want something special?

Global configuration

Per-model validation

Disable per model:

Use a custom validation rather than schema_validations automatic default:

Include validations every field, without a whitelist:

How do I know what it did?

Compatibility

Release Notes

2.4.1

2.4.0

2.3.0

2.2.1

2.2.0

2.1.1

2.1.0

2.0.2

2.0.1

2.0.0

1.4.0

1.3.1

1.3.0

1.2.0

1.1.0

1.0.1

1.0.0

0.2.2

0.2.0

History

Testing

License