gnss-sdr_GPS_L1_udp_with_monitor.conf

; This is a GNSS-SDR configuration file
; The configuration API is described at https://gnss-sdr.org/docs/sp-blocks/
; SPDX-License-Identifier: GPL-3.0-or-later
; SPDX-FileCopyrightText: (C) 2010-2020  (see AUTHORS file for a list of contributors)

[GNSS-SDR]

;######### GLOBAL OPTIONS ##################
;internal_fs_sps: Internal signal sampling frequency after the signal conditioning stage [Sps]
GNSS-SDR.internal_fs_sps=4000000

;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=Custom_UDP_Signal_Source
SignalSource.item_type=gr_complex
SignalSource.origin_address=127.0.0.1
SignalSource.capture_device=lo
SignalSource.port=1230
;SignalSource.payload_bytes=1472 # Not used! Size is retrieved from UDP Packet
SignalSource.sample_type=cfloat
SignalSource.IQ_swap=true
SignalSource.RF_channels=1
SignalSource.channels_in_udp=1
SignalSource.dump=false
SignalSource.dump_filename=./signal_source.dat

;######### SIGNAL_CONDITIONER CONFIG ############
SignalConditioner.implementation=Pass_Through

;######### CHANNELS GLOBAL CONFIG ############
Channels_1C.count=3
Channels.in_acquisition=1
Channel.signal=1C
Channel0.satellite=1
Channel1.satellite=11
Channel2.satellite=17

;######### ACQUISITION GLOBAL CONFIG ############
Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition
Acquisition_1C.item_type=gr_complex
Acquisition_1C.threshold=0.008
Acquisition_1C.doppler_max=10000
Acquisition_1C.doppler_step=250

;######### TRACKING GLOBAL CONFIG ############
Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking
Tracking_1C.item_type=gr_complex
Tracking_1C.pll_bw_hz=40.0;
Tracking_1C.dll_bw_hz=4.0;

;######### TELEMETRY DECODER GPS CONFIG ############
TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder

;######### OBSERVABLES CONFIG ############
Observables.implementation=Hybrid_Observables

;######### PVT CONFIG ############
PVT.implementation=RTKLIB_PVT
PVT.averaging_depth=100
PVT.flag_averaging=true
PVT.output_rate_ms=10
PVT.display_rate_ms=500
PVT.enable_monitor=true
PVT.monitor_client_addresses=127.0.0.1
PVT.monitor_udp_port=1234

;######### MONITOR CONFIG ############
Monitor.enable_monitor=true
Monitor.decimation_factor=1
Monitor.client_addresses=127.0.0.1
Monitor.udp_port=1233

;######### ACQUISITION MONITOR CONFIG ############
AcquisitionMonitor.enable_monitor=true
AcquisitionMonitor.decimation_factor=1
AcquisitionMonitor.client_addresses=127.0.0.1
AcquisitionMonitor.udp_port=1231

;######### TRACKING MONITOR CONFIG ############
TrackingMonitor.enable_monitor=true
TrackingMonitor.decimation_factor=1
TrackingMonitor.client_addresses=127.0.0.1
TrackingMonitor.udp_port=1232