diff --git a/containers/cassandra/Dockerfile b/containers/cassandra/Dockerfile new file mode 100644 index 000000000..2304a11f0 --- /dev/null +++ b/containers/cassandra/Dockerfile @@ -0,0 +1,3 @@ +FROM cassandra:4.0.7 + +COPY cassandra.yaml /etc/cassandra/cassandra.yaml \ No newline at end of file diff --git a/containers/cassandra/cassandra.yaml b/containers/cassandra/cassandra.yaml new file mode 100644 index 000000000..537114a0b --- /dev/null +++ b/containers/cassandra/cassandra.yaml @@ -0,0 +1,1419 @@ + +# Cassandra storage config YAML + +# NOTE: +# See https://cassandra.apache.org/doc/latest/configuration/ for +# full explanations of configuration directives +# /NOTE + +# The name of the cluster. This is mainly used to prevent machines in +# one logical cluster from joining another. +cluster_name: 'Test Cluster' + +# This defines the number of tokens randomly assigned to this node on the ring +# The more tokens, relative to other nodes, the larger the proportion of data +# that this node will store. You probably want all nodes to have the same number +# of tokens assuming they have equal hardware capability. +# +# If you leave this unspecified, Cassandra will use the default of 1 token for legacy compatibility, +# and will use the initial_token as described below. +# +# Specifying initial_token will override this setting on the node's initial start, +# on subsequent starts, this setting will apply even if initial token is set. +# +# See https://cassandra.apache.org/doc/latest/getting_started/production.html#tokens for +# best practice information about num_tokens. +# +num_tokens: 16 + +# Triggers automatic allocation of num_tokens tokens for this node. The allocation +# algorithm attempts to choose tokens in a way that optimizes replicated load over +# the nodes in the datacenter for the replica factor. +# +# The load assigned to each node will be close to proportional to its number of +# vnodes. +# +# Only supported with the Murmur3Partitioner. + +# Replica factor is determined via the replication strategy used by the specified +# keyspace. +# allocate_tokens_for_keyspace: KEYSPACE + +# Replica factor is explicitly set, regardless of keyspace or datacenter. +# This is the replica factor within the datacenter, like NTS. +allocate_tokens_for_local_replication_factor: 3 + +# initial_token allows you to specify tokens manually. While you can use it with +# vnodes (num_tokens > 1, above) -- in which case you should provide a +# comma-separated list -- it's primarily used when adding nodes to legacy clusters +# that do not have vnodes enabled. +# initial_token: + +# May either be "true" or "false" to enable globally +hinted_handoff_enabled: true + +# When hinted_handoff_enabled is true, a black list of data centers that will not +# perform hinted handoff +# hinted_handoff_disabled_datacenters: +# - DC1 +# - DC2 + +# this defines the maximum amount of time a dead host will have hints +# generated. After it has been dead this long, new hints for it will not be +# created until it has been seen alive and gone down again. +max_hint_window_in_ms: 10800000 # 3 hours + +# Maximum throttle in KBs per second, per delivery thread. This will be +# reduced proportionally to the number of nodes in the cluster. (If there +# are two nodes in the cluster, each delivery thread will use the maximum +# rate; if there are three, each will throttle to half of the maximum, +# since we expect two nodes to be delivering hints simultaneously.) +hinted_handoff_throttle_in_kb: 1024 + +# Number of threads with which to deliver hints; +# Consider increasing this number when you have multi-dc deployments, since +# cross-dc handoff tends to be slower +max_hints_delivery_threads: 2 + +# Directory where Cassandra should store hints. +# If not set, the default directory is $CASSANDRA_HOME/data/hints. +# hints_directory: /var/lib/cassandra/hints + +# How often hints should be flushed from the internal buffers to disk. +# Will *not* trigger fsync. +hints_flush_period_in_ms: 10000 + +# Maximum size for a single hints file, in megabytes. +max_hints_file_size_in_mb: 128 + +# Compression to apply to the hint files. If omitted, hints files +# will be written uncompressed. LZ4, Snappy, and Deflate compressors +# are supported. +#hints_compression: +# - class_name: LZ4Compressor +# parameters: +# - + +# Maximum throttle in KBs per second, total. This will be +# reduced proportionally to the number of nodes in the cluster. +batchlog_replay_throttle_in_kb: 1024 + +# Authentication backend, implementing IAuthenticator; used to identify users +# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthenticator, +# PasswordAuthenticator}. +# +# - AllowAllAuthenticator performs no checks - set it to disable authentication. +# - PasswordAuthenticator relies on username/password pairs to authenticate +# users. It keeps usernames and hashed passwords in system_auth.roles table. +# Please increase system_auth keyspace replication factor if you use this authenticator. +# If using PasswordAuthenticator, CassandraRoleManager must also be used (see below) +authenticator: AllowAllAuthenticator + +# Authorization backend, implementing IAuthorizer; used to limit access/provide permissions +# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthorizer, +# CassandraAuthorizer}. +# +# - AllowAllAuthorizer allows any action to any user - set it to disable authorization. +# - CassandraAuthorizer stores permissions in system_auth.role_permissions table. Please +# increase system_auth keyspace replication factor if you use this authorizer. +authorizer: AllowAllAuthorizer + +# Part of the Authentication & Authorization backend, implementing IRoleManager; used +# to maintain grants and memberships between roles. +# Out of the box, Cassandra provides org.apache.cassandra.auth.CassandraRoleManager, +# which stores role information in the system_auth keyspace. Most functions of the +# IRoleManager require an authenticated login, so unless the configured IAuthenticator +# actually implements authentication, most of this functionality will be unavailable. +# +# - CassandraRoleManager stores role data in the system_auth keyspace. Please +# increase system_auth keyspace replication factor if you use this role manager. +role_manager: CassandraRoleManager + +# Network authorization backend, implementing INetworkAuthorizer; used to restrict user +# access to certain DCs +# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllNetworkAuthorizer, +# CassandraNetworkAuthorizer}. +# +# - AllowAllNetworkAuthorizer allows access to any DC to any user - set it to disable authorization. +# - CassandraNetworkAuthorizer stores permissions in system_auth.network_permissions table. Please +# increase system_auth keyspace replication factor if you use this authorizer. +network_authorizer: AllowAllNetworkAuthorizer + +# Validity period for roles cache (fetching granted roles can be an expensive +# operation depending on the role manager, CassandraRoleManager is one example) +# Granted roles are cached for authenticated sessions in AuthenticatedUser and +# after the period specified here, become eligible for (async) reload. +# Defaults to 2000, set to 0 to disable caching entirely. +# Will be disabled automatically for AllowAllAuthenticator. +roles_validity_in_ms: 2000 + +# Refresh interval for roles cache (if enabled). +# After this interval, cache entries become eligible for refresh. Upon next +# access, an async reload is scheduled and the old value returned until it +# completes. If roles_validity_in_ms is non-zero, then this must be +# also. +# Defaults to the same value as roles_validity_in_ms. +# roles_update_interval_in_ms: 2000 + +# Validity period for permissions cache (fetching permissions can be an +# expensive operation depending on the authorizer, CassandraAuthorizer is +# one example). Defaults to 2000, set to 0 to disable. +# Will be disabled automatically for AllowAllAuthorizer. +permissions_validity_in_ms: 2000 + +# Refresh interval for permissions cache (if enabled). +# After this interval, cache entries become eligible for refresh. Upon next +# access, an async reload is scheduled and the old value returned until it +# completes. If permissions_validity_in_ms is non-zero, then this must be +# also. +# Defaults to the same value as permissions_validity_in_ms. +# permissions_update_interval_in_ms: 2000 + +# Validity period for credentials cache. This cache is tightly coupled to +# the provided PasswordAuthenticator implementation of IAuthenticator. If +# another IAuthenticator implementation is configured, this cache will not +# be automatically used and so the following settings will have no effect. +# Please note, credentials are cached in their encrypted form, so while +# activating this cache may reduce the number of queries made to the +# underlying table, it may not bring a significant reduction in the +# latency of individual authentication attempts. +# Defaults to 2000, set to 0 to disable credentials caching. +credentials_validity_in_ms: 2000 + +# Refresh interval for credentials cache (if enabled). +# After this interval, cache entries become eligible for refresh. Upon next +# access, an async reload is scheduled and the old value returned until it +# completes. If credentials_validity_in_ms is non-zero, then this must be +# also. +# Defaults to the same value as credentials_validity_in_ms. +# credentials_update_interval_in_ms: 2000 + +# The partitioner is responsible for distributing groups of rows (by +# partition key) across nodes in the cluster. The partitioner can NOT be +# changed without reloading all data. If you are adding nodes or upgrading, +# you should set this to the same partitioner that you are currently using. +# +# The default partitioner is the Murmur3Partitioner. Older partitioners +# such as the RandomPartitioner, ByteOrderedPartitioner, and +# OrderPreservingPartitioner have been included for backward compatibility only. +# For new clusters, you should NOT change this value. +# +partitioner: org.apache.cassandra.dht.Murmur3Partitioner + +# Directories where Cassandra should store data on disk. If multiple +# directories are specified, Cassandra will spread data evenly across +# them by partitioning the token ranges. +# If not set, the default directory is $CASSANDRA_HOME/data/data. +# data_file_directories: +# - /var/lib/cassandra/data + +# Directory were Cassandra should store the data of the local system keyspaces. +# By default Cassandra will store the data of the local system keyspaces in the first of the data directories specified +# by data_file_directories. +# This approach ensures that if one of the other disks is lost Cassandra can continue to operate. For extra security +# this setting allows to store those data on a different directory that provides redundancy. +# local_system_data_file_directory: + +# commit log. when running on magnetic HDD, this should be a +# separate spindle than the data directories. +# If not set, the default directory is $CASSANDRA_HOME/data/commitlog. +# commitlog_directory: /var/lib/cassandra/commitlog + +# Enable / disable CDC functionality on a per-node basis. This modifies the logic used +# for write path allocation rejection (standard: never reject. cdc: reject Mutation +# containing a CDC-enabled table if at space limit in cdc_raw_directory). +cdc_enabled: false + +# CommitLogSegments are moved to this directory on flush if cdc_enabled: true and the +# segment contains mutations for a CDC-enabled table. This should be placed on a +# separate spindle than the data directories. If not set, the default directory is +# $CASSANDRA_HOME/data/cdc_raw. +# cdc_raw_directory: /var/lib/cassandra/cdc_raw + +# Policy for data disk failures: +# +# die +# shut down gossip and client transports and kill the JVM for any fs errors or +# single-sstable errors, so the node can be replaced. +# +# stop_paranoid +# shut down gossip and client transports even for single-sstable errors, +# kill the JVM for errors during startup. +# +# stop +# shut down gossip and client transports, leaving the node effectively dead, but +# can still be inspected via JMX, kill the JVM for errors during startup. +# +# best_effort +# stop using the failed disk and respond to requests based on +# remaining available sstables. This means you WILL see obsolete +# data at CL.ONE! +# +# ignore +# ignore fatal errors and let requests fail, as in pre-1.2 Cassandra +disk_failure_policy: stop + +# Policy for commit disk failures: +# +# die +# shut down the node and kill the JVM, so the node can be replaced. +# +# stop +# shut down the node, leaving the node effectively dead, but +# can still be inspected via JMX. +# +# stop_commit +# shutdown the commit log, letting writes collect but +# continuing to service reads, as in pre-2.0.5 Cassandra +# +# ignore +# ignore fatal errors and let the batches fail +commit_failure_policy: stop + +# Maximum size of the native protocol prepared statement cache +# +# Valid values are either "auto" (omitting the value) or a value greater 0. +# +# Note that specifying a too large value will result in long running GCs and possbily +# out-of-memory errors. Keep the value at a small fraction of the heap. +# +# If you constantly see "prepared statements discarded in the last minute because +# cache limit reached" messages, the first step is to investigate the root cause +# of these messages and check whether prepared statements are used correctly - +# i.e. use bind markers for variable parts. +# +# Do only change the default value, if you really have more prepared statements than +# fit in the cache. In most cases it is not neccessary to change this value. +# Constantly re-preparing statements is a performance penalty. +# +# Default value ("auto") is 1/256th of the heap or 10MB, whichever is greater +prepared_statements_cache_size_mb: + +# Maximum size of the key cache in memory. +# +# Each key cache hit saves 1 seek and each row cache hit saves 2 seeks at the +# minimum, sometimes more. The key cache is fairly tiny for the amount of +# time it saves, so it's worthwhile to use it at large numbers. +# The row cache saves even more time, but must contain the entire row, +# so it is extremely space-intensive. It's best to only use the +# row cache if you have hot rows or static rows. +# +# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup. +# +# Default value is empty to make it "auto" (min(5% of Heap (in MB), 100MB)). Set to 0 to disable key cache. +key_cache_size_in_mb: + +# Duration in seconds after which Cassandra should +# save the key cache. Caches are saved to saved_caches_directory as +# specified in this configuration file. +# +# Saved caches greatly improve cold-start speeds, and is relatively cheap in +# terms of I/O for the key cache. Row cache saving is much more expensive and +# has limited use. +# +# Default is 14400 or 4 hours. +key_cache_save_period: 14400 + +# Number of keys from the key cache to save +# Disabled by default, meaning all keys are going to be saved +# key_cache_keys_to_save: 100 + +# Row cache implementation class name. Available implementations: +# +# org.apache.cassandra.cache.OHCProvider +# Fully off-heap row cache implementation (default). +# +# org.apache.cassandra.cache.SerializingCacheProvider +# This is the row cache implementation availabile +# in previous releases of Cassandra. +# row_cache_class_name: org.apache.cassandra.cache.OHCProvider + +# Maximum size of the row cache in memory. +# Please note that OHC cache implementation requires some additional off-heap memory to manage +# the map structures and some in-flight memory during operations before/after cache entries can be +# accounted against the cache capacity. This overhead is usually small compared to the whole capacity. +# Do not specify more memory that the system can afford in the worst usual situation and leave some +# headroom for OS block level cache. Do never allow your system to swap. +# +# Default value is 0, to disable row caching. +row_cache_size_in_mb: 0 + +# Duration in seconds after which Cassandra should save the row cache. +# Caches are saved to saved_caches_directory as specified in this configuration file. +# +# Saved caches greatly improve cold-start speeds, and is relatively cheap in +# terms of I/O for the key cache. Row cache saving is much more expensive and +# has limited use. +# +# Default is 0 to disable saving the row cache. +row_cache_save_period: 0 + +# Number of keys from the row cache to save. +# Specify 0 (which is the default), meaning all keys are going to be saved +# row_cache_keys_to_save: 100 + +# Maximum size of the counter cache in memory. +# +# Counter cache helps to reduce counter locks' contention for hot counter cells. +# In case of RF = 1 a counter cache hit will cause Cassandra to skip the read before +# write entirely. With RF > 1 a counter cache hit will still help to reduce the duration +# of the lock hold, helping with hot counter cell updates, but will not allow skipping +# the read entirely. Only the local (clock, count) tuple of a counter cell is kept +# in memory, not the whole counter, so it's relatively cheap. +# +# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup. +# +# Default value is empty to make it "auto" (min(2.5% of Heap (in MB), 50MB)). Set to 0 to disable counter cache. +# NOTE: if you perform counter deletes and rely on low gcgs, you should disable the counter cache. +counter_cache_size_in_mb: + +# Duration in seconds after which Cassandra should +# save the counter cache (keys only). Caches are saved to saved_caches_directory as +# specified in this configuration file. +# +# Default is 7200 or 2 hours. +counter_cache_save_period: 7200 + +# Number of keys from the counter cache to save +# Disabled by default, meaning all keys are going to be saved +# counter_cache_keys_to_save: 100 + +# saved caches +# If not set, the default directory is $CASSANDRA_HOME/data/saved_caches. +# saved_caches_directory: /var/lib/cassandra/saved_caches + +# Number of seconds the server will wait for each cache (row, key, etc ...) to load while starting +# the Cassandra process. Setting this to a negative value is equivalent to disabling all cache loading on startup +# while still having the cache during runtime. +# cache_load_timeout_seconds: 30 + +# commitlog_sync may be either "periodic", "group", or "batch." +# +# When in batch mode, Cassandra won't ack writes until the commit log +# has been flushed to disk. Each incoming write will trigger the flush task. +# commitlog_sync_batch_window_in_ms is a deprecated value. Previously it had +# almost no value, and is being removed. +# +# commitlog_sync_batch_window_in_ms: 2 +# +# group mode is similar to batch mode, where Cassandra will not ack writes +# until the commit log has been flushed to disk. The difference is group +# mode will wait up to commitlog_sync_group_window_in_ms between flushes. +# +# commitlog_sync_group_window_in_ms: 1000 +# +# the default option is "periodic" where writes may be acked immediately +# and the CommitLog is simply synced every commitlog_sync_period_in_ms +# milliseconds. +commitlog_sync: periodic +commitlog_sync_period_in_ms: 10000 + +# When in periodic commitlog mode, the number of milliseconds to block writes +# while waiting for a slow disk flush to complete. +# periodic_commitlog_sync_lag_block_in_ms: + +# The size of the individual commitlog file segments. A commitlog +# segment may be archived, deleted, or recycled once all the data +# in it (potentially from each columnfamily in the system) has been +# flushed to sstables. +# +# The default size is 32, which is almost always fine, but if you are +# archiving commitlog segments (see commitlog_archiving.properties), +# then you probably want a finer granularity of archiving; 8 or 16 MB +# is reasonable. +# Max mutation size is also configurable via max_mutation_size_in_kb setting in +# cassandra.yaml. The default is half the size commitlog_segment_size_in_mb * 1024. +# This should be positive and less than 2048. +# +# NOTE: If max_mutation_size_in_kb is set explicitly then commitlog_segment_size_in_mb must +# be set to at least twice the size of max_mutation_size_in_kb / 1024 +# +commitlog_segment_size_in_mb: 32 + +# Compression to apply to the commit log. If omitted, the commit log +# will be written uncompressed. LZ4, Snappy, and Deflate compressors +# are supported. +# commitlog_compression: +# - class_name: LZ4Compressor +# parameters: +# - + +# Compression to apply to SSTables as they flush for compressed tables. +# Note that tables without compression enabled do not respect this flag. +# +# As high ratio compressors like LZ4HC, Zstd, and Deflate can potentially +# block flushes for too long, the default is to flush with a known fast +# compressor in those cases. Options are: +# +# none : Flush without compressing blocks but while still doing checksums. +# fast : Flush with a fast compressor. If the table is already using a +# fast compressor that compressor is used. +# table: Always flush with the same compressor that the table uses. This +# was the pre 4.0 behavior. +# +# flush_compression: fast + +# any class that implements the SeedProvider interface and has a +# constructor that takes a Map of parameters will do. +seed_provider: + # Addresses of hosts that are deemed contact points. + # Cassandra nodes use this list of hosts to find each other and learn + # the topology of the ring. You must change this if you are running + # multiple nodes! + - class_name: org.apache.cassandra.locator.SimpleSeedProvider + parameters: + # seeds is actually a comma-delimited list of addresses. + # Ex: ",," + - seeds: "127.0.0.1:7000" + +# For workloads with more data than can fit in memory, Cassandra's +# bottleneck will be reads that need to fetch data from +# disk. "concurrent_reads" should be set to (16 * number_of_drives) in +# order to allow the operations to enqueue low enough in the stack +# that the OS and drives can reorder them. Same applies to +# "concurrent_counter_writes", since counter writes read the current +# values before incrementing and writing them back. +# +# On the other hand, since writes are almost never IO bound, the ideal +# number of "concurrent_writes" is dependent on the number of cores in +# your system; (8 * number_of_cores) is a good rule of thumb. +concurrent_reads: 32 +concurrent_writes: 32 +concurrent_counter_writes: 32 + +# For materialized view writes, as there is a read involved, so this should +# be limited by the less of concurrent reads or concurrent writes. +concurrent_materialized_view_writes: 32 + +# Maximum memory to use for inter-node and client-server networking buffers. +# +# Defaults to the smaller of 1/16 of heap or 128MB. This pool is allocated off-heap, +# so is in addition to the memory allocated for heap. The cache also has on-heap +# overhead which is roughly 128 bytes per chunk (i.e. 0.2% of the reserved size +# if the default 64k chunk size is used). +# Memory is only allocated when needed. +# networking_cache_size_in_mb: 128 + +# Enable the sstable chunk cache. The chunk cache will store recently accessed +# sections of the sstable in-memory as uncompressed buffers. +# file_cache_enabled: false + +# Maximum memory to use for sstable chunk cache and buffer pooling. +# 32MB of this are reserved for pooling buffers, the rest is used for chunk cache +# that holds uncompressed sstable chunks. +# Defaults to the smaller of 1/4 of heap or 512MB. This pool is allocated off-heap, +# so is in addition to the memory allocated for heap. The cache also has on-heap +# overhead which is roughly 128 bytes per chunk (i.e. 0.2% of the reserved size +# if the default 64k chunk size is used). +# Memory is only allocated when needed. +# file_cache_size_in_mb: 512 + +# Flag indicating whether to allocate on or off heap when the sstable buffer +# pool is exhausted, that is when it has exceeded the maximum memory +# file_cache_size_in_mb, beyond which it will not cache buffers but allocate on request. + +# buffer_pool_use_heap_if_exhausted: true + +# The strategy for optimizing disk read +# Possible values are: +# ssd (for solid state disks, the default) +# spinning (for spinning disks) +# disk_optimization_strategy: ssd + +# Total permitted memory to use for memtables. Cassandra will stop +# accepting writes when the limit is exceeded until a flush completes, +# and will trigger a flush based on memtable_cleanup_threshold +# If omitted, Cassandra will set both to 1/4 the size of the heap. +# memtable_heap_space_in_mb: 2048 +# memtable_offheap_space_in_mb: 2048 + +# memtable_cleanup_threshold is deprecated. The default calculation +# is the only reasonable choice. See the comments on memtable_flush_writers +# for more information. +# +# Ratio of occupied non-flushing memtable size to total permitted size +# that will trigger a flush of the largest memtable. Larger mct will +# mean larger flushes and hence less compaction, but also less concurrent +# flush activity which can make it difficult to keep your disks fed +# under heavy write load. +# +# memtable_cleanup_threshold defaults to 1 / (memtable_flush_writers + 1) +# memtable_cleanup_threshold: 0.11 + +# Specify the way Cassandra allocates and manages memtable memory. +# Options are: +# +# heap_buffers +# on heap nio buffers +# +# offheap_buffers +# off heap (direct) nio buffers +# +# offheap_objects +# off heap objects +memtable_allocation_type: heap_buffers + +# Limit memory usage for Merkle tree calculations during repairs. The default +# is 1/16th of the available heap. The main tradeoff is that smaller trees +# have less resolution, which can lead to over-streaming data. If you see heap +# pressure during repairs, consider lowering this, but you cannot go below +# one megabyte. If you see lots of over-streaming, consider raising +# this or using subrange repair. +# +# For more details see https://issues.apache.org/jira/browse/CASSANDRA-14096. +# +# repair_session_space_in_mb: + +# Total space to use for commit logs on disk. +# +# If space gets above this value, Cassandra will flush every dirty CF +# in the oldest segment and remove it. So a small total commitlog space +# will tend to cause more flush activity on less-active columnfamilies. +# +# The default value is the smaller of 8192, and 1/4 of the total space +# of the commitlog volume. +# +# commitlog_total_space_in_mb: 8192 + +# This sets the number of memtable flush writer threads per disk +# as well as the total number of memtables that can be flushed concurrently. +# These are generally a combination of compute and IO bound. +# +# Memtable flushing is more CPU efficient than memtable ingest and a single thread +# can keep up with the ingest rate of a whole server on a single fast disk +# until it temporarily becomes IO bound under contention typically with compaction. +# At that point you need multiple flush threads. At some point in the future +# it may become CPU bound all the time. +# +# You can tell if flushing is falling behind using the MemtablePool.BlockedOnAllocation +# metric which should be 0, but will be non-zero if threads are blocked waiting on flushing +# to free memory. +# +# memtable_flush_writers defaults to two for a single data directory. +# This means that two memtables can be flushed concurrently to the single data directory. +# If you have multiple data directories the default is one memtable flushing at a time +# but the flush will use a thread per data directory so you will get two or more writers. +# +# Two is generally enough to flush on a fast disk [array] mounted as a single data directory. +# Adding more flush writers will result in smaller more frequent flushes that introduce more +# compaction overhead. +# +# There is a direct tradeoff between number of memtables that can be flushed concurrently +# and flush size and frequency. More is not better you just need enough flush writers +# to never stall waiting for flushing to free memory. +# +#memtable_flush_writers: 2 + +# Total space to use for change-data-capture logs on disk. +# +# If space gets above this value, Cassandra will throw WriteTimeoutException +# on Mutations including tables with CDC enabled. A CDCCompactor is responsible +# for parsing the raw CDC logs and deleting them when parsing is completed. +# +# The default value is the min of 4096 mb and 1/8th of the total space +# of the drive where cdc_raw_directory resides. +# cdc_total_space_in_mb: 4096 + +# When we hit our cdc_raw limit and the CDCCompactor is either running behind +# or experiencing backpressure, we check at the following interval to see if any +# new space for cdc-tracked tables has been made available. Default to 250ms +# cdc_free_space_check_interval_ms: 250 + +# A fixed memory pool size in MB for for SSTable index summaries. If left +# empty, this will default to 5% of the heap size. If the memory usage of +# all index summaries exceeds this limit, SSTables with low read rates will +# shrink their index summaries in order to meet this limit. However, this +# is a best-effort process. In extreme conditions Cassandra may need to use +# more than this amount of memory. +index_summary_capacity_in_mb: + +# How frequently index summaries should be resampled. This is done +# periodically to redistribute memory from the fixed-size pool to sstables +# proportional their recent read rates. Setting to -1 will disable this +# process, leaving existing index summaries at their current sampling level. +index_summary_resize_interval_in_minutes: 60 + +# Whether to, when doing sequential writing, fsync() at intervals in +# order to force the operating system to flush the dirty +# buffers. Enable this to avoid sudden dirty buffer flushing from +# impacting read latencies. Almost always a good idea on SSDs; not +# necessarily on platters. +trickle_fsync: false +trickle_fsync_interval_in_kb: 10240 + +# TCP port, for commands and data +# For security reasons, you should not expose this port to the internet. Firewall it if needed. +storage_port: 7000 + +# SSL port, for legacy encrypted communication. This property is unused unless enabled in +# server_encryption_options (see below). As of cassandra 4.0, this property is deprecated +# as a single port can be used for either/both secure and insecure connections. +# For security reasons, you should not expose this port to the internet. Firewall it if needed. +ssl_storage_port: 7001 + +# Address or interface to bind to and tell other Cassandra nodes to connect to. +# You _must_ change this if you want multiple nodes to be able to communicate! +# +# Set listen_address OR listen_interface, not both. +# +# Leaving it blank leaves it up to InetAddress.getLocalHost(). This +# will always do the Right Thing _if_ the node is properly configured +# (hostname, name resolution, etc), and the Right Thing is to use the +# address associated with the hostname (it might not be). If unresolvable +# it will fall back to InetAddress.getLoopbackAddress(), which is wrong for production systems. +# +# Setting listen_address to 0.0.0.0 is always wrong. +# +listen_address: localhost + +# Set listen_address OR listen_interface, not both. Interfaces must correspond +# to a single address, IP aliasing is not supported. +# listen_interface: eth0 + +# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address +# you can specify which should be chosen using listen_interface_prefer_ipv6. If false the first ipv4 +# address will be used. If true the first ipv6 address will be used. Defaults to false preferring +# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6. +# listen_interface_prefer_ipv6: false + +# Address to broadcast to other Cassandra nodes +# Leaving this blank will set it to the same value as listen_address +# broadcast_address: 1.2.3.4 + +# When using multiple physical network interfaces, set this +# to true to listen on broadcast_address in addition to +# the listen_address, allowing nodes to communicate in both +# interfaces. +# Ignore this property if the network configuration automatically +# routes between the public and private networks such as EC2. +# listen_on_broadcast_address: false + +# Internode authentication backend, implementing IInternodeAuthenticator; +# used to allow/disallow connections from peer nodes. +# internode_authenticator: org.apache.cassandra.auth.AllowAllInternodeAuthenticator + +# Whether to start the native transport server. +# The address on which the native transport is bound is defined by rpc_address. +start_native_transport: true +# port for the CQL native transport to listen for clients on +# For security reasons, you should not expose this port to the internet. Firewall it if needed. +native_transport_port: 9042 +# Enabling native transport encryption in client_encryption_options allows you to either use +# encryption for the standard port or to use a dedicated, additional port along with the unencrypted +# standard native_transport_port. +# Enabling client encryption and keeping native_transport_port_ssl disabled will use encryption +# for native_transport_port. Setting native_transport_port_ssl to a different value +# from native_transport_port will use encryption for native_transport_port_ssl while +# keeping native_transport_port unencrypted. +# native_transport_port_ssl: 9142 +# The maximum threads for handling requests (note that idle threads are stopped +# after 30 seconds so there is not corresponding minimum setting). +# native_transport_max_threads: 128 +# +# The maximum size of allowed frame. Frame (requests) larger than this will +# be rejected as invalid. The default is 256MB. If you're changing this parameter, +# you may want to adjust max_value_size_in_mb accordingly. This should be positive and less than 2048. +# native_transport_max_frame_size_in_mb: 256 + +# The maximum number of concurrent client connections. +# The default is -1, which means unlimited. +# native_transport_max_concurrent_connections: -1 + +# The maximum number of concurrent client connections per source ip. +# The default is -1, which means unlimited. +# native_transport_max_concurrent_connections_per_ip: -1 + +# Controls whether Cassandra honors older, yet currently supported, protocol versions. +# The default is true, which means all supported protocols will be honored. +native_transport_allow_older_protocols: true + +# Controls when idle client connections are closed. Idle connections are ones that had neither reads +# nor writes for a time period. +# +# Clients may implement heartbeats by sending OPTIONS native protocol message after a timeout, which +# will reset idle timeout timer on the server side. To close idle client connections, corresponding +# values for heartbeat intervals have to be set on the client side. +# +# Idle connection timeouts are disabled by default. +# native_transport_idle_timeout_in_ms: 60000 + +# The address or interface to bind the native transport server to. +# +# Set rpc_address OR rpc_interface, not both. +# +# Leaving rpc_address blank has the same effect as on listen_address +# (i.e. it will be based on the configured hostname of the node). +# +# Note that unlike listen_address, you can specify 0.0.0.0, but you must also +# set broadcast_rpc_address to a value other than 0.0.0.0. +# +# For security reasons, you should not expose this port to the internet. Firewall it if needed. +rpc_address: localhost + +# Set rpc_address OR rpc_interface, not both. Interfaces must correspond +# to a single address, IP aliasing is not supported. +# rpc_interface: eth1 + +# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address +# you can specify which should be chosen using rpc_interface_prefer_ipv6. If false the first ipv4 +# address will be used. If true the first ipv6 address will be used. Defaults to false preferring +# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6. +# rpc_interface_prefer_ipv6: false + +# RPC address to broadcast to drivers and other Cassandra nodes. This cannot +# be set to 0.0.0.0. If left blank, this will be set to the value of +# rpc_address. If rpc_address is set to 0.0.0.0, broadcast_rpc_address must +# be set. +# broadcast_rpc_address: 1.2.3.4 + +# enable or disable keepalive on rpc/native connections +rpc_keepalive: true + +# Uncomment to set socket buffer size for internode communication +# Note that when setting this, the buffer size is limited by net.core.wmem_max +# and when not setting it it is defined by net.ipv4.tcp_wmem +# See also: +# /proc/sys/net/core/wmem_max +# /proc/sys/net/core/rmem_max +# /proc/sys/net/ipv4/tcp_wmem +# /proc/sys/net/ipv4/tcp_wmem +# and 'man tcp' +# internode_socket_send_buffer_size_in_bytes: + +# Uncomment to set socket buffer size for internode communication +# Note that when setting this, the buffer size is limited by net.core.wmem_max +# and when not setting it it is defined by net.ipv4.tcp_wmem +# internode_socket_receive_buffer_size_in_bytes: + +# Set to true to have Cassandra create a hard link to each sstable +# flushed or streamed locally in a backups/ subdirectory of the +# keyspace data. Removing these links is the operator's +# responsibility. +incremental_backups: false + +# Whether or not to take a snapshot before each compaction. Be +# careful using this option, since Cassandra won't clean up the +# snapshots for you. Mostly useful if you're paranoid when there +# is a data format change. +snapshot_before_compaction: false + +# Whether or not a snapshot is taken of the data before keyspace truncation +# or dropping of column families. The STRONGLY advised default of true +# should be used to provide data safety. If you set this flag to false, you will +# lose data on truncation or drop. +auto_snapshot: true + +# The act of creating or clearing a snapshot involves creating or removing +# potentially tens of thousands of links, which can cause significant performance +# impact, especially on consumer grade SSDs. A non-zero value here can +# be used to throttle these links to avoid negative performance impact of +# taking and clearing snapshots +snapshot_links_per_second: 0 + +# Granularity of the collation index of rows within a partition. +# Increase if your rows are large, or if you have a very large +# number of rows per partition. The competing goals are these: +# +# - a smaller granularity means more index entries are generated +# and looking up rows withing the partition by collation column +# is faster +# - but, Cassandra will keep the collation index in memory for hot +# rows (as part of the key cache), so a larger granularity means +# you can cache more hot rows +column_index_size_in_kb: 64 + +# Per sstable indexed key cache entries (the collation index in memory +# mentioned above) exceeding this size will not be held on heap. +# This means that only partition information is held on heap and the +# index entries are read from disk. +# +# Note that this size refers to the size of the +# serialized index information and not the size of the partition. +column_index_cache_size_in_kb: 2 + +# Number of simultaneous compactions to allow, NOT including +# validation "compactions" for anti-entropy repair. Simultaneous +# compactions can help preserve read performance in a mixed read/write +# workload, by mitigating the tendency of small sstables to accumulate +# during a single long running compactions. The default is usually +# fine and if you experience problems with compaction running too +# slowly or too fast, you should look at +# compaction_throughput_mb_per_sec first. +# +# concurrent_compactors defaults to the smaller of (number of disks, +# number of cores), with a minimum of 2 and a maximum of 8. +# +# If your data directories are backed by SSD, you should increase this +# to the number of cores. +#concurrent_compactors: 1 + +# Number of simultaneous repair validations to allow. If not set or set to +# a value less than 1, it defaults to the value of concurrent_compactors. +# To set a value greeater than concurrent_compactors at startup, the system +# property cassandra.allow_unlimited_concurrent_validations must be set to +# true. To dynamically resize to a value > concurrent_compactors on a running +# node, first call the bypassConcurrentValidatorsLimit method on the +# org.apache.cassandra.db:type=StorageService mbean +# concurrent_validations: 0 + +# Number of simultaneous materialized view builder tasks to allow. +concurrent_materialized_view_builders: 1 + +# Throttles compaction to the given total throughput across the entire +# system. The faster you insert data, the faster you need to compact in +# order to keep the sstable count down, but in general, setting this to +# 16 to 32 times the rate you are inserting data is more than sufficient. +# Setting this to 0 disables throttling. Note that this accounts for all types +# of compaction, including validation compaction (building Merkle trees +# for repairs). +compaction_throughput_mb_per_sec: 64 + +# When compacting, the replacement sstable(s) can be opened before they +# are completely written, and used in place of the prior sstables for +# any range that has been written. This helps to smoothly transfer reads +# between the sstables, reducing page cache churn and keeping hot rows hot +sstable_preemptive_open_interval_in_mb: 50 + +# When enabled, permits Cassandra to zero-copy stream entire eligible +# SSTables between nodes, including every component. +# This speeds up the network transfer significantly subject to +# throttling specified by stream_throughput_outbound_megabits_per_sec. +# Enabling this will reduce the GC pressure on sending and receiving node. +# When unset, the default is enabled. While this feature tries to keep the +# disks balanced, it cannot guarantee it. This feature will be automatically +# disabled if internode encryption is enabled. +# stream_entire_sstables: true + +# Throttles all outbound streaming file transfers on this node to the +# given total throughput in Mbps. This is necessary because Cassandra does +# mostly sequential IO when streaming data during bootstrap or repair, which +# can lead to saturating the network connection and degrading rpc performance. +# When unset, the default is 200 Mbps or 25 MB/s. +# stream_throughput_outbound_megabits_per_sec: 200 + +# Throttles all streaming file transfer between the datacenters, +# this setting allows users to throttle inter dc stream throughput in addition +# to throttling all network stream traffic as configured with +# stream_throughput_outbound_megabits_per_sec +# When unset, the default is 200 Mbps or 25 MB/s +# inter_dc_stream_throughput_outbound_megabits_per_sec: 200 + +# Server side timeouts for requests. The server will return a timeout exception +# to the client if it can't complete an operation within the corresponding +# timeout. Those settings are a protection against: +# 1) having client wait on an operation that might never terminate due to some +# failures. +# 2) operations that use too much CPU/read too much data (leading to memory build +# up) by putting a limit to how long an operation will execute. +# For this reason, you should avoid putting these settings too high. In other words, +# if you are timing out requests because of underlying resource constraints then +# increasing the timeout will just cause more problems. Of course putting them too +# low is equally ill-advised since clients could get timeouts even for successful +# operations just because the timeout setting is too tight. + +# How long the coordinator should wait for read operations to complete. +# Lowest acceptable value is 10 ms. +read_request_timeout_in_ms: 5000 +# How long the coordinator should wait for seq or index scans to complete. +# Lowest acceptable value is 10 ms. +range_request_timeout_in_ms: 10000 +# How long the coordinator should wait for writes to complete. +# Lowest acceptable value is 10 ms. +write_request_timeout_in_ms: 2000 +# How long the coordinator should wait for counter writes to complete. +# Lowest acceptable value is 10 ms. +counter_write_request_timeout_in_ms: 5000 +# How long a coordinator should continue to retry a CAS operation +# that contends with other proposals for the same row. +# Lowest acceptable value is 10 ms. +cas_contention_timeout_in_ms: 1000 +# How long the coordinator should wait for truncates to complete +# (This can be much longer, because unless auto_snapshot is disabled +# we need to flush first so we can snapshot before removing the data.) +# Lowest acceptable value is 10 ms. +truncate_request_timeout_in_ms: 60000 +# The default timeout for other, miscellaneous operations. +# Lowest acceptable value is 10 ms. +request_timeout_in_ms: 10000 + +# Defensive settings for protecting Cassandra from true network partitions. +# See (CASSANDRA-14358) for details. +# +# The amount of time to wait for internode tcp connections to establish. +# internode_tcp_connect_timeout_in_ms: 2000 +# +# The amount of time unacknowledged data is allowed on a connection before we throw out the connection +# Note this is only supported on Linux + epoll, and it appears to behave oddly above a setting of 30000 +# (it takes much longer than 30s) as of Linux 4.12. If you want something that high set this to 0 +# which picks up the OS default and configure the net.ipv4.tcp_retries2 sysctl to be ~8. +# internode_tcp_user_timeout_in_ms: 30000 + +# The amount of time unacknowledged data is allowed on a streaming connection. +# The default is 5 minutes. Increase it or set it to 0 in order to increase the timeout. +# internode_streaming_tcp_user_timeout_in_ms: 300000 + +# Global, per-endpoint and per-connection limits imposed on messages queued for delivery to other nodes +# and waiting to be processed on arrival from other nodes in the cluster. These limits are applied to the on-wire +# size of the message being sent or received. +# +# The basic per-link limit is consumed in isolation before any endpoint or global limit is imposed. +# Each node-pair has three links: urgent, small and large. So any given node may have a maximum of +# N*3*(internode_application_send_queue_capacity_in_bytes+internode_application_receive_queue_capacity_in_bytes) +# messages queued without any coordination between them although in practice, with token-aware routing, only RF*tokens +# nodes should need to communicate with significant bandwidth. +# +# The per-endpoint limit is imposed on all messages exceeding the per-link limit, simultaneously with the global limit, +# on all links to or from a single node in the cluster. +# The global limit is imposed on all messages exceeding the per-link limit, simultaneously with the per-endpoint limit, +# on all links to or from any node in the cluster. +# +# internode_application_send_queue_capacity_in_bytes: 4194304 #4MiB +# internode_application_send_queue_reserve_endpoint_capacity_in_bytes: 134217728 #128MiB +# internode_application_send_queue_reserve_global_capacity_in_bytes: 536870912 #512MiB +# internode_application_receive_queue_capacity_in_bytes: 4194304 #4MiB +# internode_application_receive_queue_reserve_endpoint_capacity_in_bytes: 134217728 #128MiB +# internode_application_receive_queue_reserve_global_capacity_in_bytes: 536870912 #512MiB + + +# How long before a node logs slow queries. Select queries that take longer than +# this timeout to execute, will generate an aggregated log message, so that slow queries +# can be identified. Set this value to zero to disable slow query logging. +slow_query_log_timeout_in_ms: 500 + +# Enable operation timeout information exchange between nodes to accurately +# measure request timeouts. If disabled, replicas will assume that requests +# were forwarded to them instantly by the coordinator, which means that +# under overload conditions we will waste that much extra time processing +# already-timed-out requests. +# +# Warning: It is generally assumed that users have setup NTP on their clusters, and that clocks are modestly in sync, +# since this is a requirement for general correctness of last write wins. +#cross_node_timeout: true + +# Set keep-alive period for streaming +# This node will send a keep-alive message periodically with this period. +# If the node does not receive a keep-alive message from the peer for +# 2 keep-alive cycles the stream session times out and fail +# Default value is 300s (5 minutes), which means stalled stream +# times out in 10 minutes by default +# streaming_keep_alive_period_in_secs: 300 + +# Limit number of connections per host for streaming +# Increase this when you notice that joins are CPU-bound rather that network +# bound (for example a few nodes with big files). +# streaming_connections_per_host: 1 + + +# phi value that must be reached for a host to be marked down. +# most users should never need to adjust this. +# phi_convict_threshold: 8 + +# endpoint_snitch -- Set this to a class that implements +# IEndpointSnitch. The snitch has two functions: +# +# - it teaches Cassandra enough about your network topology to route +# requests efficiently +# - it allows Cassandra to spread replicas around your cluster to avoid +# correlated failures. It does this by grouping machines into +# "datacenters" and "racks." Cassandra will do its best not to have +# more than one replica on the same "rack" (which may not actually +# be a physical location) +# +# CASSANDRA WILL NOT ALLOW YOU TO SWITCH TO AN INCOMPATIBLE SNITCH +# ONCE DATA IS INSERTED INTO THE CLUSTER. This would cause data loss. +# This means that if you start with the default SimpleSnitch, which +# locates every node on "rack1" in "datacenter1", your only options +# if you need to add another datacenter are GossipingPropertyFileSnitch +# (and the older PFS). From there, if you want to migrate to an +# incompatible snitch like Ec2Snitch you can do it by adding new nodes +# under Ec2Snitch (which will locate them in a new "datacenter") and +# decommissioning the old ones. +# +# Out of the box, Cassandra provides: +# +# SimpleSnitch: +# Treats Strategy order as proximity. This can improve cache +# locality when disabling read repair. Only appropriate for +# single-datacenter deployments. +# +# GossipingPropertyFileSnitch +# This should be your go-to snitch for production use. The rack +# and datacenter for the local node are defined in +# cassandra-rackdc.properties and propagated to other nodes via +# gossip. If cassandra-topology.properties exists, it is used as a +# fallback, allowing migration from the PropertyFileSnitch. +# +# PropertyFileSnitch: +# Proximity is determined by rack and data center, which are +# explicitly configured in cassandra-topology.properties. +# +# Ec2Snitch: +# Appropriate for EC2 deployments in a single Region. Loads Region +# and Availability Zone information from the EC2 API. The Region is +# treated as the datacenter, and the Availability Zone as the rack. +# Only private IPs are used, so this will not work across multiple +# Regions. +# +# Ec2MultiRegionSnitch: +# Uses public IPs as broadcast_address to allow cross-region +# connectivity. (Thus, you should set seed addresses to the public +# IP as well.) You will need to open the storage_port or +# ssl_storage_port on the public IP firewall. (For intra-Region +# traffic, Cassandra will switch to the private IP after +# establishing a connection.) +# +# RackInferringSnitch: +# Proximity is determined by rack and data center, which are +# assumed to correspond to the 3rd and 2nd octet of each node's IP +# address, respectively. Unless this happens to match your +# deployment conventions, this is best used as an example of +# writing a custom Snitch class and is provided in that spirit. +# +# You can use a custom Snitch by setting this to the full class name +# of the snitch, which will be assumed to be on your classpath. +endpoint_snitch: SimpleSnitch + +# controls how often to perform the more expensive part of host score +# calculation +dynamic_snitch_update_interval_in_ms: 100 +# controls how often to reset all host scores, allowing a bad host to +# possibly recover +dynamic_snitch_reset_interval_in_ms: 600000 +# if set greater than zero, this will allow +# 'pinning' of replicas to hosts in order to increase cache capacity. +# The badness threshold will control how much worse the pinned host has to be +# before the dynamic snitch will prefer other replicas over it. This is +# expressed as a double which represents a percentage. Thus, a value of +# 0.2 means Cassandra would continue to prefer the static snitch values +# until the pinned host was 20% worse than the fastest. +dynamic_snitch_badness_threshold: 1.0 + +# Configure server-to-server internode encryption +# +# JVM and netty defaults for supported SSL socket protocols and cipher suites can +# be replaced using custom encryption options. This is not recommended +# unless you have policies in place that dictate certain settings, or +# need to disable vulnerable ciphers or protocols in case the JVM cannot +# be updated. +# +# FIPS compliant settings can be configured at JVM level and should not +# involve changing encryption settings here: +# https://docs.oracle.com/javase/8/docs/technotes/guides/security/jsse/FIPS.html +# +# **NOTE** this default configuration is an insecure configuration. If you need to +# enable server-to-server encryption generate server keystores (and truststores for mutual +# authentication) per: +# http://download.oracle.com/javase/8/docs/technotes/guides/security/jsse/JSSERefGuide.html#CreateKeystore +# Then perform the following configuration changes: +# +# Step 1: Set internode_encryption= and explicitly set optional=true. Restart all nodes +# +# Step 2: Set optional=false (or remove it) and if you generated truststores and want to use mutual +# auth set require_client_auth=true. Restart all nodes +server_encryption_options: + # On outbound connections, determine which type of peers to securely connect to. + # The available options are : + # none : Do not encrypt outgoing connections + # dc : Encrypt connections to peers in other datacenters but not within datacenters + # rack : Encrypt connections to peers in other racks but not within racks + # all : Always use encrypted connections + internode_encryption: none + # When set to true, encrypted and unencrypted connections are allowed on the storage_port + # This should _only be true_ while in unencrypted or transitional operation + # optional defaults to true if internode_encryption is none + # optional: true + # If enabled, will open up an encrypted listening socket on ssl_storage_port. Should only be used + # during upgrade to 4.0; otherwise, set to false. + enable_legacy_ssl_storage_port: false + # Set to a valid keystore if internode_encryption is dc, rack or all + keystore: conf/.keystore + keystore_password: cassandra + # Verify peer server certificates + require_client_auth: false + # Set to a valid trustore if require_client_auth is true + truststore: conf/.truststore + truststore_password: cassandra + # Verify that the host name in the certificate matches the connected host + require_endpoint_verification: false + # More advanced defaults: + # protocol: TLS + # store_type: JKS + # cipher_suites: [ + # TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384, TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256, + # TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256, TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA, + # TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA, TLS_RSA_WITH_AES_128_GCM_SHA256, TLS_RSA_WITH_AES_128_CBC_SHA, + # TLS_RSA_WITH_AES_256_CBC_SHA + # ] + +# Configure client-to-server encryption. +# +# **NOTE** this default configuration is an insecure configuration. If you need to +# enable client-to-server encryption generate server keystores (and truststores for mutual +# authentication) per: +# http://download.oracle.com/javase/8/docs/technotes/guides/security/jsse/JSSERefGuide.html#CreateKeystore +# Then perform the following configuration changes: +# +# Step 1: Set enabled=true and explicitly set optional=true. Restart all nodes +# +# Step 2: Set optional=false (or remove it) and if you generated truststores and want to use mutual +# auth set require_client_auth=true. Restart all nodes +client_encryption_options: + # Enable client-to-server encryption + enabled: false + # When set to true, encrypted and unencrypted connections are allowed on the native_transport_port + # This should _only be true_ while in unencrypted or transitional operation + # optional defaults to true when enabled is false, and false when enabled is true. + # optional: true + # Set keystore and keystore_password to valid keystores if enabled is true + keystore: conf/.keystore + keystore_password: cassandra + # Verify client certificates + require_client_auth: false + # Set trustore and truststore_password if require_client_auth is true + # truststore: conf/.truststore + # truststore_password: cassandra + # More advanced defaults: + # protocol: TLS + # store_type: JKS + # cipher_suites: [ + # TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384, TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256, + # TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256, TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA, + # TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA, TLS_RSA_WITH_AES_128_GCM_SHA256, TLS_RSA_WITH_AES_128_CBC_SHA, + # TLS_RSA_WITH_AES_256_CBC_SHA + # ] + +# internode_compression controls whether traffic between nodes is +# compressed. +# Can be: +# +# all +# all traffic is compressed +# +# dc +# traffic between different datacenters is compressed +# +# none +# nothing is compressed. +internode_compression: dc + +# Enable or disable tcp_nodelay for inter-dc communication. +# Disabling it will result in larger (but fewer) network packets being sent, +# reducing overhead from the TCP protocol itself, at the cost of increasing +# latency if you block for cross-datacenter responses. +inter_dc_tcp_nodelay: false + +# TTL for different trace types used during logging of the repair process. +tracetype_query_ttl: 86400 +tracetype_repair_ttl: 604800 + +# If unset, all GC Pauses greater than gc_log_threshold_in_ms will log at +# INFO level +# UDFs (user defined functions) are disabled by default. +# As of Cassandra 3.0 there is a sandbox in place that should prevent execution of evil code. +enable_user_defined_functions: false + +# Enables scripted UDFs (JavaScript UDFs). +# Java UDFs are always enabled, if enable_user_defined_functions is true. +# Enable this option to be able to use UDFs with "language javascript" or any custom JSR-223 provider. +# This option has no effect, if enable_user_defined_functions is false. +enable_scripted_user_defined_functions: false + +# The default Windows kernel timer and scheduling resolution is 15.6ms for power conservation. +# Lowering this value on Windows can provide much tighter latency and better throughput, however +# some virtualized environments may see a negative performance impact from changing this setting +# below their system default. The sysinternals 'clockres' tool can confirm your system's default +# setting. +windows_timer_interval: 1 + + +# Enables encrypting data at-rest (on disk). Different key providers can be plugged in, but the default reads from +# a JCE-style keystore. A single keystore can hold multiple keys, but the one referenced by +# the "key_alias" is the only key that will be used for encrypt opertaions; previously used keys +# can still (and should!) be in the keystore and will be used on decrypt operations +# (to handle the case of key rotation). +# +# It is strongly recommended to download and install Java Cryptography Extension (JCE) +# Unlimited Strength Jurisdiction Policy Files for your version of the JDK. +# (current link: http://www.oracle.com/technetwork/java/javase/downloads/jce8-download-2133166.html) +# +# Currently, only the following file types are supported for transparent data encryption, although +# more are coming in future cassandra releases: commitlog, hints +transparent_data_encryption_options: + enabled: false + chunk_length_kb: 64 + cipher: AES/CBC/PKCS5Padding + key_alias: testing:1 + # CBC IV length for AES needs to be 16 bytes (which is also the default size) + # iv_length: 16 + key_provider: + - class_name: org.apache.cassandra.security.JKSKeyProvider + parameters: + - keystore: conf/.keystore + keystore_password: cassandra + store_type: JCEKS + key_password: cassandra + + +##################### +# SAFETY THRESHOLDS # +##################### + +# When executing a scan, within or across a partition, we need to keep the +# tombstones seen in memory so we can return them to the coordinator, which +# will use them to make sure other replicas also know about the deleted rows. +# With workloads that generate a lot of tombstones, this can cause performance +# problems and even exaust the server heap. +# (http://www.datastax.com/dev/blog/cassandra-anti-patterns-queues-and-queue-like-datasets) +# Adjust the thresholds here if you understand the dangers and want to +# scan more tombstones anyway. These thresholds may also be adjusted at runtime +# using the StorageService mbean. +tombstone_warn_threshold: 1000 +tombstone_failure_threshold: 100000 + +# Filtering and secondary index queries at read consistency levels above ONE/LOCAL_ONE use a +# mechanism called replica filtering protection to ensure that results from stale replicas do +# not violate consistency. (See CASSANDRA-8272 and CASSANDRA-15907 for more details.) This +# mechanism materializes replica results by partition on-heap at the coordinator. The more possibly +# stale results returned by the replicas, the more rows materialized during the query. +replica_filtering_protection: + # These thresholds exist to limit the damage severely out-of-date replicas can cause during these + # queries. They limit the number of rows from all replicas individual index and filtering queries + # can materialize on-heap to return correct results at the desired read consistency level. + # + # "cached_replica_rows_warn_threshold" is the per-query threshold at which a warning will be logged. + # "cached_replica_rows_fail_threshold" is the per-query threshold at which the query will fail. + # + # These thresholds may also be adjusted at runtime using the StorageService mbean. + # + # If the failure threshold is breached, it is likely that either the current page/fetch size + # is too large or one or more replicas is severely out-of-sync and in need of repair. + cached_rows_warn_threshold: 2000 + cached_rows_fail_threshold: 32000 + +# Log WARN on any multiple-partition batch size exceeding this value. 5kb per batch by default. +# Caution should be taken on increasing the size of this threshold as it can lead to node instability. +batch_size_warn_threshold_in_kb: 5 + +# Fail any multiple-partition batch exceeding this value. 50kb (10x warn threshold) by default. +batch_size_fail_threshold_in_kb: 50 + +# Log WARN on any batches not of type LOGGED than span across more partitions than this limit +unlogged_batch_across_partitions_warn_threshold: 10 + +# Log a warning when compacting partitions larger than this value +compaction_large_partition_warning_threshold_mb: 100 + +# GC Pauses greater than 200 ms will be logged at INFO level +# This threshold can be adjusted to minimize logging if necessary +# gc_log_threshold_in_ms: 200 + +# GC Pauses greater than gc_warn_threshold_in_ms will be logged at WARN level +# Adjust the threshold based on your application throughput requirement. Setting to 0 +# will deactivate the feature. +# gc_warn_threshold_in_ms: 1000 + +# Maximum size of any value in SSTables. Safety measure to detect SSTable corruption +# early. Any value size larger than this threshold will result into marking an SSTable +# as corrupted. This should be positive and less than 2048. +# max_value_size_in_mb: 256 + +# Track a metric per keyspace indicating whether replication achieved the ideal consistency +# level for writes without timing out. This is different from the consistency level requested by +# each write which may be lower in order to facilitate availability. +# ideal_consistency_level: EACH_QUORUM + +# Automatically upgrade sstables after upgrade - if there is no ordinary compaction to do, the +# oldest non-upgraded sstable will get upgraded to the latest version +# automatic_sstable_upgrade: false +# Limit the number of concurrent sstable upgrades +# max_concurrent_automatic_sstable_upgrades: 1 + +# Audit logging - Logs every incoming CQL command request, authentication to a node. See the docs +# on audit_logging for full details about the various configuration options. +audit_logging_options: + enabled: false + logger: + - class_name: BinAuditLogger + # audit_logs_dir: + # included_keyspaces: + # excluded_keyspaces: system, system_schema, system_virtual_schema + # included_categories: + # excluded_categories: + # included_users: + # excluded_users: + # roll_cycle: HOURLY + # block: true + # max_queue_weight: 268435456 # 256 MiB + # max_log_size: 17179869184 # 16 GiB + ## archive command is "/path/to/script.sh %path" where %path is replaced with the file being rolled: + # archive_command: + # max_archive_retries: 10 + + +# default options for full query logging - these can be overridden from command line when executing +# nodetool enablefullquerylog +#full_query_logging_options: + # log_dir: + # roll_cycle: HOURLY + # block: true + # max_queue_weight: 268435456 # 256 MiB + # max_log_size: 17179869184 # 16 GiB + ## archive command is "/path/to/script.sh %path" where %path is replaced with the file being rolled: + # archive_command: + # max_archive_retries: 10 + +# validate tombstones on reads and compaction +# can be either "disabled", "warn" or "exception" +# corrupted_tombstone_strategy: disabled + +# Diagnostic Events # +# If enabled, diagnostic events can be helpful for troubleshooting operational issues. Emitted events contain details +# on internal state and temporal relationships across events, accessible by clients via JMX. +diagnostic_events_enabled: false + +# Use native transport TCP message coalescing. If on upgrade to 4.0 you found your throughput decreasing, and in +# particular you run an old kernel or have very fewer client connections, this option might be worth evaluating. +#native_transport_flush_in_batches_legacy: false + +# Enable tracking of repaired state of data during reads and comparison between replicas +# Mismatches between the repaired sets of replicas can be characterized as either confirmed +# or unconfirmed. In this context, unconfirmed indicates that the presence of pending repair +# sessions, unrepaired partition tombstones, or some other condition means that the disparity +# cannot be considered conclusive. Confirmed mismatches should be a trigger for investigation +# as they may be indicative of corruption or data loss. +# There are separate flags for range vs partition reads as single partition reads are only tracked +# when CL > 1 and a digest mismatch occurs. Currently, range queries don't use digests so if +# enabled for range reads, all range reads will include repaired data tracking. As this adds +# some overhead, operators may wish to disable it whilst still enabling it for partition reads +repaired_data_tracking_for_range_reads_enabled: false +repaired_data_tracking_for_partition_reads_enabled: false +# If false, only confirmed mismatches will be reported. If true, a separate metric for unconfirmed +# mismatches will also be recorded. This is to avoid potential signal:noise issues are unconfirmed +# mismatches are less actionable than confirmed ones. +report_unconfirmed_repaired_data_mismatches: false + +# Having many tables and/or keyspaces negatively affects performance of many operations in the +# cluster. When the number of tables/keyspaces in the cluster exceeds the following thresholds +# a client warning will be sent back to the user when creating a table or keyspace. +# table_count_warn_threshold: 150 +# keyspace_count_warn_threshold: 40 + +######################### +# EXPERIMENTAL FEATURES # +######################### + +# Enables materialized view creation on this node. +# Materialized views are considered experimental and are not recommended for production use. +enable_materialized_views: true + +# Enables SASI index creation on this node. +# SASI indexes are considered experimental and are not recommended for production use. +enable_sasi_indexes: false + +# Enables creation of transiently replicated keyspaces on this node. +# Transient replication is experimental and is not recommended for production use. +enable_transient_replication: false + +# Enables the used of 'ALTER ... DROP COMPACT STORAGE' statements on this node. +# 'ALTER ... DROP COMPACT STORAGE' is considered experimental and is not recommended for production use. +enable_drop_compact_storage: false diff --git a/containers/wait-for-cassandra/Dockerfile b/containers/wait-for-cassandra/Dockerfile new file mode 100644 index 000000000..8d7b89849 --- /dev/null +++ b/containers/wait-for-cassandra/Dockerfile @@ -0,0 +1,6 @@ +FROM cassandra:4.0.7 + +WORKDIR /opt +COPY wait-for-cassandra.sh /opt/ + +ENTRYPOINT ["sh", "./wait-for-cassandra.sh"] diff --git a/containers/wait-for-cassandra/wait-for-cassandra.sh b/containers/wait-for-cassandra/wait-for-cassandra.sh new file mode 100644 index 000000000..cf67c3944 --- /dev/null +++ b/containers/wait-for-cassandra/wait-for-cassandra.sh @@ -0,0 +1,13 @@ +#!/bin/bash + +# Exit script wit ERRORLEVEL if any command fails +set -e + +echo "Waiting for Cassandra to come online..." +until cqlsh cassandra -e "show version" +do + echo "Ping..." + sleep 1 +done + +echo "Cassandra is up and running" diff --git a/docker-compose.yml b/docker-compose.yml index d7d733d2b..4605b19de 100644 --- a/docker-compose.yml +++ b/docker-compose.yml @@ -79,7 +79,8 @@ services: ## DATABASES cassandra: - image: cassandra:3.11.1 + build: + context: ./containers/cassandra environment: - CASSANDRA_START_RPC=true - MAX_HEAP_SIZE=768M @@ -95,6 +96,14 @@ services: timeout: 5s interval: 15s + wait-for-cassandra: + build: + context: ./containers/wait-for-cassandra + networks: + - app + depends_on: + - cassandra + elasticsearch: image: amazon/opendistro-for-elasticsearch:1.13.2 mem_limit: 1G # keep an eye diff --git a/local/commands/install.js b/local/commands/install.js index ec94a07ea..461ff034e 100644 --- a/local/commands/install.js +++ b/local/commands/install.js @@ -48,6 +48,7 @@ module.exports.handler = async argv => { argv.stack && require('../tasks/cleanup-stack'), argv.stack && require('../tasks/provision-elasticsearch'), argv.stack && require('../tasks/provision-mysql'), + argv.stack && require('../tasks/wait-for-cassandra'), argv.stack && require('../tasks/install-minds'), require('../tasks/restart'), ].filter(Boolean), { diff --git a/local/tasks/wait-for-cassandra.js b/local/tasks/wait-for-cassandra.js new file mode 100644 index 000000000..bfef6c3c8 --- /dev/null +++ b/local/tasks/wait-for-cassandra.js @@ -0,0 +1,12 @@ +const Listr = require('listr'); +const doco = require('../lib/doco'); + +module.exports = { + title: 'Start Cassandra', + task: () => new Listr([ + { + title: 'Waiting for Cassandra', + task: () => doco('run', 'wait-for-cassandra') + }, + ]) +};