color3

\mainpage Main Page

---

Color 3 Click

Color 3 Click is a mikroBUS™ add-on board with a TCS3771 color sensor (also known as a light-to-digital converter) and a narrow beam Infrared LED. The circuit can also function as a proximity sensor

Click Product page

---

Click library

• Author : MikroE Team
• Date : Dec 2019.
• Type : I2C type

Software Support

We provide a library for the Color3 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Color3 Click driver.

Standard key functions :

• color3_cfg_setup Config Object Initialization function.

void color3_cfg_setup ( color3_cfg_t *cfg ); 

• color3_init Initialization function.

err_t color3_init ( color3_t *ctx, color3_cfg_t *cfg );

Example key functions :

• color3_get_rgbc_data This function reads data from 4 channels (Red, Green, Blue, Clear).

err_t color3_get_rgbc_data ( color3_t *ctx, color3_channels_t *channels );

• color3_rgbc_to_hsl This function converts RGBC (red, green, blue, clear) to HSL (hue, saturation, lightness) color value.

void color3_rgbc_to_hsl ( color3_t *ctx, color3_channels_t *rgbc, color3_hsl_t *hsl );

• color3_get_color This function returns the color name flag from the input HSL color.

uint8_t color3_get_color ( color3_hsl_t *hsl );

Examples Description

This example demonstrates the use of Color 3 Click board by reading data from RGBC channels and converting them to HSL color and displaying those data as well as the detected color name on the USB UART.

The demo application is composed of two sections :

Application Init

Initializes the driver and performs the Click default configuration.

void application_init ( void )
{
    log_cfg_t log_cfg;
    color3_cfg_t cfg;

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );

    //  Click initialization.
    color3_cfg_setup( &cfg );
    COLOR3_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    color3_init( &color3, &cfg );
    Delay_ms ( 100 );

    color3_set_default_settings( &color3 );
    Delay_ms ( 1000 );

    log_printf( &logger, "-----------------\r\n" );
    log_printf( &logger, " Color 3  Click  \r\n" );
    log_printf( &logger, "-----------------\r\n" );
}
  

Application Task

Reads the values of all channels and converts them to HSL color and displays those data as well as the detected color name on the USB UART every 500ms approximately.

void application_task ( void )
{
    color3_channels_t rgbc;
    if ( COLOR3_OK == color3_get_rgbc_data ( &color3, &rgbc ) )
    {
        color3_hsl_t hsl;
        color3_rgbc_to_hsl ( &color3, &rgbc, &hsl );
        log_printf ( &logger, "\r\n Red: %u\r\n", rgbc.red );
        log_printf ( &logger, " Green: %u\r\n", rgbc.green );
        log_printf ( &logger, " Blue: %u\r\n", rgbc.blue );
        log_printf ( &logger, " Clear: %u\r\n", rgbc.clear );
        log_printf ( &logger, " Hue: %.1f deg\r\n", hsl.hue );
        log_printf ( &logger, " Saturation: %.1f %%\r\n", hsl.saturation );
        log_printf ( &logger, " Lightness: %.1f %%\r\n", hsl.lightness );
        log_printf ( &logger, " Dominated color: " );
        switch ( color3_get_color ( &hsl ) )
        {
            case COLOR3_RED_COLOR:
            {
                log_printf ( &logger, "RED\r\n" );
                break;
            }
            case COLOR3_YELLOW_COLOR:
            {
                log_printf ( &logger, "YELLOW\r\n" );
                break;
            }
            case COLOR3_GREEN_COLOR:
            {
                log_printf ( &logger, "GREEN\r\n" );
                break;
            }
            case COLOR3_CYAN_COLOR:
            {
                log_printf ( &logger, "CYAN\r\n" );
                break;
            }
            case COLOR3_BLUE_COLOR:
            {
                log_printf ( &logger, "BLUE\r\n" );
                break;
            }
            case COLOR3_MAGENTA_COLOR:
            {
                log_printf ( &logger, "MAGENTA\r\n" );
                break;
            }
            case COLOR3_WHITE_COLOR:
            {
                log_printf ( &logger, "WHITE\r\n" );
                break;
            }
            case COLOR3_BLACK_COLOR:
            {
                log_printf ( &logger, "BLACK\r\n" );
                break;
            }
            default:
            {
                log_printf ( &logger, "UNKNOWN\r\n" );
                break;
            }
        }
    }
    Delay_ms ( 500 );
}  

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Color3

Additional notes and informations

Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---