Skip to content

Latest commit

 

History

History
executable file
·
107 lines (83 loc) · 5.73 KB

README.md

File metadata and controls

executable file
·
107 lines (83 loc) · 5.73 KB

This repository contains fixes for module crash on Android 7 and above.

Touch Pressure/Size Gesture

Introduction

Android OS reports pressure and/or size of your touch when you tap, press, swipe, and so on. You can use special pressure/size value to fire any action, and this project provides interface and triggers to do that. The triggers are new gestures by unique touching based on touch pressure/size.

The special values are

  • Large touch area -> Force Touch
  • Small touch area -> Knuckle Touch
  • Increasing touch area -> Wiggle Touch
  • Reducing touch area -> Scratch Touch.

Xposed Module is here!

tkgktyk/ForceTouch/xposed is a Xposed modeule to detect Touch Pressure/Size and recognize them as Gesture. Repository: Force Touch Detector (FTD).

Force Touch

touch2 touch3

If you touch your screen with the ball of thumb, the touch area increases. Call it "Force Touch" in this project. It is possible to distinguish ordinary touch operation from deliberately Force Touch because there is a distinct difference between these touch area. By checking if a touch event is started from Force Touch, you can change the action of the touch.

Knuckle Touch

If you touch your screen with knuckle, you can make very small touch area. The same as Force Touch, you can fire specified action when you touch on small area.

Wiggle Touch

Above two methods use absolute threshold value to detect unique touching. However the absolute value causes inconvenient situations, such as, you cannot fire specified action with other fingers that have not been adjusted, it is not working while charging because characteristics of touch sensor is changed by charging current on some phones. The solution is using relative threshold.

Relative method needs more than two touch events. When android read out initial pressure/size of each touch stroke, calculate threshold value by initial pressure/size * ratio(variable). After that, when pressure/size of your touch is changed and grows over threshold, fire specified action. The ratio must be more than 1.0 for Wiggle Touch.

Scratch Touch

A pair method of Wiggle Touch. When android read out initial pressure/size of each touch stroke, calculate threshold value by initial pressure/size * ratio(variable). After that, when pressure/size of your touch is changed and reduces under threshold, fire specified action. The ratio must be less than 1.0 for Scratch Touch.

Force Touch Screen

This is an option for Wiggle Touch (available) and Scratch Touch (in the future). The concept is to fire actions without releasing your finger like pie, and realize force touch button.

Trigger to start Force Touch Screen is Wiggle Touch or Scratch Touch. Then FTD sends a broadcast named FORCE_TOUCH_BEGIN with touched position on screen. And other actions for Force Touch Screen are also notified by broadcasting. So any app that receives broadcast can handle this feature, such as Floating Action.

Broadcast Actions

Syntax of full action name is jp.tkgktyk.xposed.forcetouchdetector.intent.action.NAME. And all actions has package name and touch position as extra. Package name is jp.tkgktyk.xposed.forcetouchdetector.intent.extra.PACKAGE_NAME, touch positions are jp.tkgktyk.xposed.forcetouchdetector.intent.extra.X and jp.tkgktyk.xposed.forcetouchdetector.intent.extra.Y.

NAME Parameters Description
FORCE_TOUCH_BEGIN Enter in Force Touch Screen.
FORCE_TOUCH_DOWN Pressure/size passed threshold again.
FORCE_TOUCH_UP Pressure/size reverted to initial value.
FORCE_TOUCH_END The finger that's trigger was released.
FORCE_TOUCH_CANCEL This touch stroke was canceled by some reason.

Getting Started

At first, check your hardware supports FTD functions or not. Open a threshold screen, Pressure -> Threshold, and then test tap and force touch with two buttons. If Max, Pressure and Ave are changed by each touch, your touch screen supports the pressure parameter, you can use FTD by pressure. If not so, your phone doesn't support pressure, next try Size -> Threshold screen.

Note that some smartphones don't support both the pressure and the size parameter. FTD doesn't work on such a device.

After checking the capability of your touch screen, practice and adjust Force Touch with Threshold screen. Tap small button and do force touch on large button 5 times or more respectively, you'll get a Max value for normal tap and an Ave value for force touch. The Ave value must be higher than the Max value, you should practice force touch until so.

Finally, input a number between the Ave and the Max, and turn Master Switch on.

Adjustment

There are 3 parameters to adjust sensitivity for force touch.

Threshold
When pressure or size of your touch exceed this value, it is recognized as a force touch.
Detection Window
The length of time FTD waits for force touch. If zero, FTD checks only the beginning of your touch stroke.
Detection Sensitivity
The sensitivity for force tap and flick. If zero, Force Touch is always interpreted as a flick. If too high value, it is always tap. The range is 0 to about 20, depends on hardware.

I propose two strategies for adjustment.

  1. Long detection window and high threshold value
  2. Short detection window and mid threshold value

Maybe the experience of the former is near to Apple's Force Touch, squashing. However Android devices detect the pressure of touch by touch area even if you enable Pressure Threshold. In the other words, FTD's Force Touch based on Android API and Apple's one are fundamentally different. So I recommend to try both strategies.