Document error codes? #3
Comments
|
This is with a GE GDF570SGFWW. |
|
I saw a 97 today. While the operatingMode was "Cycle Active". Nothing seems to be wrong... |
|
The error 97 code persisted past the cycle ending and the dishwasher going into and out of standby mode. Nothing seems to be wrong. |
|
97 persisted a few days then became 96. |
|
@Hixie Error code 97 and 96 are for "Absent Heat Source" and "No Water in Tub" respectively. The Absent Heat Source is set when the temperature of the tub is not detected at a required level at a required point in time several consecutive cycles in a row. The No Water in Tub was an experimental error code. Both error codes are informational for service technicians and the unit will run as intended regardless of the error code state. |
Hixie
added a commit
to Hixie/dishwasher
that referenced
this issue
Jul 7, 2016
Operating mode 11 is actually "machine control only" mode, not an invalid connection. (Thanks to @johnnysako in GEMakers/gea-plugin-dishwasher#6 and GEMakers/gea-plugin-dishwasher#4) Convert fill and drain rates to SI units. (Thanks to @palisaide in GEMakers/gea-plugin-dishwasher#10) resetCount is actually the count of power cycles. Also added support for tracking uptime and boot times in the log. (Thanks to @palisaide in GEMakers/gea-plugin-dishwasher#11) Slight correction and clarifications to personality information. (Thanks to @palisaide in GEMakers/gea-plugin-dishwasher#12) Added text for error codes 0, 96, and 97. (Thanks to @johnnysako in GEMakers/gea-plugin-dishwasher#3) Sample output (piping the logs from the last month into the dart script, and then letting the proxy connect to it to show live data): ``` GE GDF570SGFWW dishwasher model ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔ ╔═══════════════════════════════════════════════════════════════════════════════════════════════════════╗ ║ Personality: machine-control-driven UI board (specified by factory-configured bootloader parametric). ║ ║ Fill rate: 52.6ml/s. Drain rate: 129.5ml/s. ║ ║ Dry drain state: 0 failed dry drains (maximum 1). ║ ║ Continuous cycle mode: cycle 0, 0 remaining cycles. 0m between cycles. ║ ╚═══════════════════════════════════════════════════════════════════════════════════════════════════════╝ ┌────┤ Low power • rebooted ├────────────────────────────────┐ │ AutoSense Rinse Aid Enabled │ │ Cycle count: 43 cycles completed out of 53 cycles started. │ │ Power cycle events: 11. Uptime: 1h 59m 9s. │ │ Door open/close count: 291. Sensors: ▁▇▁▁▁▁▁█▁▁▁▁ │ └────────────────┤ 2016-07-06 19:50:53.709 ├─────────────────┘ Event log (most recent first): 30: Booted at: 2016-07-06 17:51:44.342 29: Cycle started at: 2016-07-05 21:23:00.000. Temperature: 23.9°C .. 61.7°C; final: 61.1°C. Turbidity: 45.0 NTU .. 2225.0 NTU. Duration: 1h 50m. 28: Cycle started at: 2016-07-04 00:22:00.000. Temperature: 23.9°C .. 63.3°C; final: 62.8°C. Turbidity: 40.0 NTU .. 1681.0 NTU. Duration: 1h 50m. 27: Cycle started at: 2016-07-03 14:20:00.000. Temperature: 23.3°C .. 61.7°C; final: 61.1°C. Turbidity: 32.0 NTU .. 2733.0 NTU. Duration: 2h 1m. 26: Cycle started at: 2016-06-30 18:53:00.000. Temperature: 23.3°C .. 60.0°C; final: 60.0°C. Turbidity: 40.0 NTU .. 1790.0 NTU. Duration: 2h 18m. 25: Cycle started at: 2016-06-28 10:51:00.000. Temperature: 23.3°C .. 63.3°C; final: 63.3°C. Turbidity: 41.0 NTU .. 1237.0 NTU. Duration: 1h 53m. 24: Cycle started at: 2016-06-27 14:24:00.000. Duration: 0m. 23: Cycle started at: 2016-06-27 14:24:00.000. Temperature: 23.3°C .. 62.8°C; final: 62.8°C. Turbidity: 34.0 NTU .. 934.0 NTU. Duration: 1h 54m. 22: Cycle started at: 2016-06-26 17:58:00.000. Temperature: 23.3°C .. 61.1°C; final: 61.1°C. Turbidity: 37.0 NTU .. 1950.0 NTU. Duration: 1h 50m. 21: Cycle started at: 2016-06-23 12:56:00.000. Temperature: 22.8°C .. 62.2°C; final: 61.7°C. Turbidity: 51.0 NTU .. 3039.0 NTU. Duration: 2h 14m. 20: Cycle started at: 2016-06-22 19:29:00.000. Temperature: 23.3°C .. 61.1°C; final: 60.6°C. Turbidity: 84.0 NTU .. 3316.0 NTU. Duration: 2h 14m. 19: Cycle started at: 2016-06-20 20:46:00.000. Temperature: 23.3°C .. 68.3°C; final: 67.2°C. Turbidity: 29.0 NTU .. 2066.0 NTU. Duration: 2h 30m. 18: Cycle started at: 2016-06-19 22:59:00.000. Temperature: 30.6°C .. 61.7°C; final: 61.1°C. Turbidity: 43.0 NTU .. 3294.0 NTU. Duration: 2h 14m. 17: Cycle started at: 2016-06-19 19:46:00.000. Temperature: 23.3°C .. 60.0°C; final: 59.4°C. Turbidity: 63.0 NTU .. 949.0 NTU. Duration: 2h 18m. 16: Cycle started at: 2016-06-17 15:48:00.000. Temperature: 22.8°C .. 60.0°C; final: 60.0°C. Turbidity: 70.0 NTU .. 1514.0 NTU. Duration: 2h 18m. 15: Cycle started at: 2016-06-16 19:31:00.000. Temperature: 22.8°C .. 62.8°C; final: 62.2°C. Turbidity: 69.0 NTU .. 1134.0 NTU. Duration: 2h 21m. 14: Cycle started at: 2016-06-15 16:36:00.000. Temperature: 22.8°C .. 62.2°C; final: 62.2°C. Turbidity: 54.0 NTU .. 849.0 NTU. Duration: 3h 25m. 13: Cycle started at: 2016-06-14 18:35:00.000. Temperature: 23.3°C .. 61.7°C; final: 61.1°C. Turbidity: 66.0 NTU .. 936.0 NTU. Duration: 2h 46m. 12: Cycle started at: 2016-06-12 14:09:00.000. Temperature: 23.3°C .. 59.4°C; final: 58.9°C. Turbidity: 63.0 NTU .. 3269.0 NTU. Duration: 2h 15m. 11: Cycle started at: 2016-06-12 01:00:00.000. Duration: 0m. 10: Cycle started at: 2016-06-12 00:34:00.000. Duration: 0m. 9: Cycle started at: 2016-06-12 00:26:00.000. Duration: 0m. 8: Cycle started at: 2016-06-12 00:17:00.000. Temperature: 25.0°C .. 25.6°C; final: 25.6°C. Turbidity: 149.0 NTU .. 1279.0 NTU. Duration: 2m. 7: Cycle started at: 2016-06-12 00:12:00.000. Temperature: 23.9°C .. 25.0°C. Duration: 3m. 6: Cycle started at: 2016-06-11 13:59:00.000. Temperature: 22.2°C .. 51.1°C; final: 51.1°C. Turbidity: 152.0 NTU .. 3485.0 NTU. Duration: 41m. 5: Cycle started at: 2016-06-09 19:42:00.000. Temperature: 23.9°C .. 68.3°C; final: 68.3°C. Turbidity: 18.0 NTU .. 461.0 NTU. Duration: 3h 38m. 4: Cycle started at: 2016-06-08 17:58:00.000. Temperature: 32.2°C .. 68.3°C; final: 66.7°C. Turbidity: 19.0 NTU .. 3101.0 NTU. Duration: 3h 34m. 3: Cycle started at: 2016-06-08 13:36:00.000. Temperature: 23.3°C .. 67.8°C; final: 67.8°C. Turbidity: 18.0 NTU .. 1789.0 NTU. Duration: 3h 35m. 2: Cycle started at: 2016-06-06 20:40:00.000. Temperature: 24.4°C .. 60.0°C; final: 59.4°C. Turbidity: 55.0 NTU .. 1322.0 NTU. Duration: 2h 18m. 1: Cycle started at: 2016-06-05 19:28:00.000. Temperature: 23.3°C .. 60.0°C; final: 60.0°C. Turbidity: 29.0 NTU .. 626.0 NTU. Duration: 3h 22m. ```
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I tried to write
85tocontrolLockand got back anerrormessage witherrorId: 2anderrorState: 1, then about a second later, anothererrormessage witherrorId: 2anderrorState: 0. I've no idea what this means and the documentation doesn't say.The text was updated successfully, but these errors were encountered: