Cannot capture any data to the .pcap file with the Multiboard v2

[jaochoo]

I followed this tutorial on how to capture packages via Marauder app:
https://www.youtube.com/watch?v=subLBPJ3IxU&t=489s

I have enabled save .pcap to SD and it can successfully write .pcap and files on the SD card and the log files can be saved, however, the written .pcap files are always at 0 bytes

Is there any fix?

I bought the device from a reseller who flashes the multiboard their own and do not know how to flash the multiboard v2 which does not have any USB port.

[anibaldron]

I have exactly the same problem as you. Have you managed to solve your problem?

[TomaszMaK]

Same here.

1. Board flashed with "esp32_marauder_v0_13_6_20231214_flipper_sd_serial"
2. marauder companion 0.6.5
   I get logs saved ok, but PCAP not.

Tried on oryginal flipper firmware, unleashed, and xtreme.

Anybody get working pcap files to save??

[Onesimo89]

Same problem, empty file .pcap

[jaochoo]

Unfortunately, I have not found any solution yet

[dmitriy-zelinskiy-unbiased-co-uk]

same here

[Matr8ska]

I also bought the same dev board from Dr.B0rk, same issues, i tried with Rouge, Unleashed, Extreame everything seems working expect PCAP --> 0 Kb.

I have a further question: can you flash the Marauder only with the "proprietary " flash.bin ? With the others like UberGuidoZ it doesn't recognize the dev connected.