forked from adafruit/Adafruit-Retrogame
-
Notifications
You must be signed in to change notification settings - Fork 0
/
joyBonnetAsMouse.py
178 lines (144 loc) · 5.86 KB
/
joyBonnetAsMouse.py
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
#!/usr/bin/python
# Somewhat minimal Adafruit Joy Bonnet handler. Runs in background,
# translates inputs from buttons and ADC joystick to virtual USB keyboard
# events.
# Prerequisites:
# sudo apt-get install python-pip python-smbus python-dev
# sudo pip install evdev
# Be sure to enable I2C via raspi-config. Also, udev rules will need to
# be set up per retrogame directions.
# Credit to Pimoroni for Picade HAT scripts as starting point.
import time
import signal
import os
import sys
from datetime import datetime
try:
from evdev import uinput, UInput, ecodes as e
except ImportError:
exit("This library requires the evdev module\nInstall with: sudo pip install evdev")
try:
import RPi.GPIO as gpio
except ImportError:
exit("This library requires the RPi.GPIO module\nInstall with: sudo pip install RPi.GPIO")
try:
from smbus import SMBus
except ImportError:
exit("This library requires the smbus module\nInstall with: sudo pip install smbus")
DEBUG = False
BOUNCE_TIME = 0.01 # Debounce time in seconds
BUTTON_A = 12
BUTTON_B = 6
BUTTON_X = 16
BUTTON_Y = 13
SELECT = 20
START = 26
PLAYER1 = 23
PLAYER2 = 22
BUTTONS = [BUTTON_A, BUTTON_B, BUTTON_X, BUTTON_Y, SELECT, START, PLAYER1, PLAYER2]
MOUSE_SENSITIVITY = 4 # 0-10
MOUSE_DEADZONE = 40 # Values under this are zeroed
KEYS= { # EDIT KEYCODES IN THIS TABLE TO YOUR PREFERENCES:
# See /usr/include/linux/input.h for keycode names
# Keyboard Bonnet EmulationStation
BUTTON_A: e.KEY_RIGHT, # 'A' button as mouse click
BUTTON_B: e.KEY_DOWN, # 'B' button as right click
BUTTON_X: e.KEY_UP, # 'X' button
BUTTON_Y: e.KEY_LEFT, # 'Y' button
SELECT: e.BTN_RIGHT, # 'Select' button
START: e.BTN_MOUSE, # 'Start' button
PLAYER1: e.KEY_PAGEUP, # '#1' button
PLAYER2: e.KEY_PAGEDOWN, # '#2' button
}
###################################### ADS1015 microdriver #################################
# Register and other configuration values:
ADS1x15_DEFAULT_ADDRESS = 0x48
ADS1x15_POINTER_CONVERSION = 0x00
ADS1x15_POINTER_CONFIG = 0x01
ADS1015_REG_CONFIG_CQUE_NONE = 0x0003 # Disable the comparator and put ALERT/RDY in high state (default)
ADS1015_REG_CONFIG_CLAT_NONLAT = 0x0000 # Non-latching comparator (default)
ADS1015_REG_CONFIG_CPOL_ACTVLOW = 0x0000 # ALERT/RDY pin is low when active (default)
ADS1015_REG_CONFIG_CMODE_TRAD = 0x0000 # Traditional comparator with hysteresis (default)
ADS1015_REG_CONFIG_DR_1600SPS = 0x0080 # 1600 samples per second (default)
ADS1015_REG_CONFIG_MODE_SINGLE = 0x0100 # Power-down single-shot mode (default)
ADS1015_REG_CONFIG_GAIN_ONE = 0x0200 # gain of 1
ADS1015_REG_CONFIG_MUX_SINGLE_0 = 0x4000 # channel 0
ADS1015_REG_CONFIG_MUX_SINGLE_1 = 0x5000 # channel 1
ADS1015_REG_CONFIG_MUX_SINGLE_2 = 0x6000 # channel 2
ADS1015_REG_CONFIG_MUX_SINGLE_3 = 0x7000 # channel 3
ADS1015_REG_CONFIG_OS_SINGLE = 0x8000 # start a single conversion
ADS1015_REG_CONFIG_CHANNELS = (ADS1015_REG_CONFIG_MUX_SINGLE_0, ADS1015_REG_CONFIG_MUX_SINGLE_1,
ADS1015_REG_CONFIG_MUX_SINGLE_2, ADS1015_REG_CONFIG_MUX_SINGLE_3)
def ads_read(channel):
#configdata = bus.read_i2c_block_data(ADS1x15_DEFAULT_ADDRESS, ADS1x15_POINTER_CONFIG, 2)
#print("Getting config byte = 0x%02X%02X" % (configdata[0], configdata[1]))
configword = ADS1015_REG_CONFIG_CQUE_NONE | ADS1015_REG_CONFIG_CLAT_NONLAT | ADS1015_REG_CONFIG_CPOL_ACTVLOW | ADS1015_REG_CONFIG_CMODE_TRAD | ADS1015_REG_CONFIG_DR_1600SPS | ADS1015_REG_CONFIG_MODE_SINGLE | ADS1015_REG_CONFIG_GAIN_ONE | ADS1015_REG_CONFIG_CHANNELS[channel] | ADS1015_REG_CONFIG_OS_SINGLE
configdata = [configword >> 8, configword & 0xFF]
#print("Setting config byte = 0x%02X%02X" % (configdata[0], configdata[1]))
bus.write_i2c_block_data(ADS1x15_DEFAULT_ADDRESS, ADS1x15_POINTER_CONFIG, configdata)
configdata = bus.read_i2c_block_data(ADS1x15_DEFAULT_ADDRESS, ADS1x15_POINTER_CONFIG, 2)
#print("Getting config byte = 0x%02X%02X" % (configdata[0], configdata[1]))
while True:
try:
configdata = bus.read_i2c_block_data(ADS1x15_DEFAULT_ADDRESS, ADS1x15_POINTER_CONFIG, 2)
#print("Getting config byte = 0x%02X%02X" % (configdata[0], configdata[1]))
if (configdata[0] & 0x80):
break
except:
pass
# read data out!
analogdata = bus.read_i2c_block_data(ADS1x15_DEFAULT_ADDRESS, ADS1x15_POINTER_CONVERSION, 2)
#print(analogdata),
retval = (analogdata[0] << 8) | analogdata[1]
retval /= 16
#print("-> %d" %retval)
return retval
######################## main program
os.system("sudo modprobe uinput")
bus = SMBus(1)
# GPIO init
gpio.setwarnings(False)
gpio.setmode(gpio.BCM)
gpio.setup(BUTTONS, gpio.IN, pull_up_down=gpio.PUD_UP)
try:
caps= {e.EV_KEY: KEYS.values(),
e.EV_REL: [e.REL_X, e.REL_Y],
}
ui = UInput(caps, name="retrogame", bustype=e.BUS_USB)
except uinput.UInputError as e:
sys.stdout.write(e.message)
sys.stdout.write("Have you tried running as root? sudo {}".format(sys.argv[0]))
sys.exit(0)
def log(msg):
sys.stdout.write(str(datetime.now()))
sys.stdout.write(": ")
sys.stdout.write(msg)
sys.stdout.write("\n")
sys.stdout.flush()
def handle_button(pin):
key = KEYS[pin]
time.sleep(BOUNCE_TIME)
state = 0 if gpio.input(pin) else 1
ui.write(e.EV_KEY, key, state)
ui.syn()
if DEBUG:
log("Pin: {}, KeyCode: {}, Event: {}".format(pin, key, 'press' if state else 'release'))
for button in BUTTONS:
gpio.add_event_detect(button, gpio.BOTH, callback=handle_button, bouncetime=1)
while True:
try:
y = 800 - ads_read(0)
x = ads_read(1) - 800
except IOError:
continue
# print("(%d , %d)" % (x, y))
if abs(x) < MOUSE_DEADZONE:
x=0
if abs(y) < MOUSE_DEADZONE:
y=0
x = x >> (10 - MOUSE_SENSITIVITY)
y = y >> (10 - MOUSE_SENSITIVITY)
ui.write(e.EV_REL, e.REL_X, x)
ui.write(e.EV_REL, e.REL_Y, -y)
ui.syn()
time.sleep(0.01)