Skip to content

Latest commit

 

History

History
89 lines (50 loc) · 2.38 KB

Readme.md

File metadata and controls

89 lines (50 loc) · 2.38 KB
Raw

Dionaea-DARWIS Setup

Prerequisites

  1. Install Vagrant from the official site, https://developer.hashicorp.com/vagrant/downloads.
  1. Install Virtualbox from the official site, https://www.virtualbox.org/wiki/Downloads

Installing the Setup

Download this repository via

git clone https://github.com/CSPF-Founder/dionaea-darwis.git

Or to download it as a zip file, click on Code in the top right corner and then select Download ZIP.

cd into the folder that is created.

In Linux:

In the project folder run the below command.

chmod +x setupvm.sh

./setupvm.sh

During the installation and startup, it will ask you to select the bridge adapter interface as shown below:

Which interface should the network bridge to?.

Please enter the corresponding number for the bridge interface option and press enter.

Once the vagrant installation is completed, it will automatically restart in Linux.

In Windows:

Go to the project folder on command prompt and then run the below commands.

vagrant up

During the installation and startup, it will ask you to select the bridge adapter interface as shown below:

Which interface should the network bridge to?.

Please enter the corresponding number for the bridge interface option and press 'enter'.

After it has been completed, run the below command to reload the VM manually.

vagrant reload

Accessing the Panel

The Honeypot panel is available on the URL: https://localhost:12443.

Note: If you want to change the port, you can change forwardport in the vagrantfile.

For information on how to use the panel, please refer to Manual.md

Other info:

The samples are shared between dionaea and the main code using the ./samples folder.

The management panel can be accessed via url: https://localhost:12443

  • If you want to start the VM after your computer restarts you can give vargant up on this folder or start from the virtualbox manager.

  • Once up you can access the VM by giving the command vagrant ssh dionaea-darwis

Exposing Dionaea

Dionaea will listen on these ports: 21,80,443,445. These ports should be exposed to the network on which you expect the attack to happen.

Contributors

Sabari Selvan

Suriya Prakash