Tesseract 2.0+ provided scripts that make it possible to run some of the UNLV tests published in the Fourth Annual Test of OCR Accuracy. See AT-1995.pdf (originally available at http://www.isri.unlv.edu/). The main purpose of providing these test scripts is to enable Tesseract users to verify that their installation is correct, and that no architecture-specific problems are causing bad recognition accuracy. It also serves as a benchmark to demonstrate accuracy improvements of each version. Developers working on Tesseract may find the benchmarking tools useful for measuring experimental new modules.
Note that some architecture-specific variation is bound to occur. Most of these should be caused by varying treatment and optimization of floating-point arithmetic between compilers. It is also possible of course that there are memory initialization errors that show up as differences between architectures, but we claim to have found most of these already in the unicodeization process.
The UNLV images are G4 compressed, so you must build Tesseract with TIFF support, but all recent versions include libtiff by default.
Windows users also have to have some unix shell script capability, perhaps via cygwin or equivalent.
The current scripts only cover tests of the 3B test sets (ie 300 dpi bitonal). The adaptive thresholding in the open-source Tesseract is not the same as in the original as the original adaptive thresholding was not included in the open source release, so the 8 bit grey image tests would not compare correctly, and the other resolutions, while interesting, do not really serve a useful regression testing purpose.
See README file for UNLV tests for the current instructions on how to run the tests for Tesseract 4.
Here are some of the results of the 1995 test, taken from AT-1995.pdf and reformatted to match the output of the Tesseract test tools:
Testid Testset Character Word Non-stopword
Errors Acc Change Errors Acc Change Errors Acc Change
1995 bus.3B 5959 98.14% 0.00% 1631 96.83% 0.00% 1293 95.73% 0.00%
1995 doe3.3B 36349 97.52% 0.00% 7826 96.34% 0.00% 7042 94.87% 0.00%
1995 mag.3B 15043 97.74% 0.00% 4566 96.01% 0.00% 3379 94.99% 0.00%
1995 news.3B 6432 98.69% 0.00% 1946 97.68% 0.00% 1502 96.94% 0.00%
(The change column is for the recent tests, and measures the change over these 1995 results.)
The results of Tesseract 2.00 compiled with gcc 4.0.3-1ubuntu5 are:
Testid Testset Character Word Non-stopword
Errors Acc Change Errors Acc Change Errors Acc Change
gcc4.0 bus.3B 6259 98.04% 5.03% 1691 96.71% 3.68% 1313 95.66 1.55%
gcc4.0 doe3.3B 28850 98.03% -20.63% 7863 96.32% 0.47% 6688 95.13 -5.03%
gcc4.0 mag.3B 14815 97.78% -1.52% 4396 96.16% -3.72% 3124 95.37 -7.55%
gcc4.0 news.3B 7533 98.47% 17.12% 1758 97.91% -9.66% 1220 97.51 -18.77%
gcc4.0 Total 57457 - -9.92% 15708 - -1.63% 12345 - -6.59%
The change column shows wild variation in accuracy over the 1995 results, with a 20% reduction in character errors on the doe3.3B test set, but a 17% increase in character errors on the news.3B test set. Since the engine has been completely retrained since the 1995 tests, and it is now running on a different processor with a different compiler, it is difficult to pin down the cause of this wild variation. (It may also be partly due to the absence of the Aspirin package.)
To illustrate what a difference the compiler makes, here are the results from the same code compiled with gcc 4.1.1:
Testid Testset Character Word Non-stopword
Errors Acc Change Errors Acc Change Errors Acc Change
gcc4.1 bus.3B 6258 98.04% 5.02% 1690 96.72% 3.62% 1312 95.67 1.47%
gcc4.1 doe3.3B 28589 98.05% -21.35% 7864 96.32% 0.49% 6692 95.12 -4.97%
gcc4.1 mag.3B 14800 97.78% -1.62% 4394 96.16% -3.77% 3123 95.37 -7.58%
gcc4.1 news.3B 7524 98.47% 16.98% 1759 97.91% -9.61% 1220 97.51 -18.77%
gcc4.1 Total 57171 - -10.37% 15707 - -1.64% 12347 - -6.58%
The error rates are not that different, but there is a slight difference. In contrast, the same code built with VisualC++ Express gives this:
Testid Testset Character Word Non-stopword
Errors Acc Change Errors Acc Change Errors Acc Change
vc++exp bus.3B 6270 98.04% 5.22% 1695 96.71% 3.92% 1315 95.66 1.70%
vc++exp doe3.3B 29098 98.01% -19.95% 8246 96.14% 5.37% 7038 94.87 -0.06%
vc++exp mag.3B 14981 97.75% -0.41% 4435 96.12% -2.87% 3157 95.32 -6.57%
vc++exp news.3B 7548 98.47% 17.35% 1763 97.90% -9.40% 1224 97.51 -18.51%
vc++exp Total 57897 - -9.23% 16139 - 1.06% 12734 - -3.65%
This shows a fairly large increase in error rate, and this is after eliminating some use of floating point arithmetic from the code. More dramatically different though, is Visual C++6, which measures up with slightly better word accuracy, but worse character accuracy:
Testid Testset Character Word Non-stopword
Errors Acc Change Errors Acc Change Errors Acc Change
vc6 bus.3B 6298 98.03% 5.69% 1696 96.70% 3.99% 1317 95.65 1.86%
vc6 doe3.3B 29745 97.97% -18.17% 8105 96.20% 3.57% 6894 94.98 -2.10%
vc6 mag.3B 15036 97.74% -0.05% 4448 96.11% -2.58% 3165 95.31 -6.33%
vc6 news.3B 7531 98.47% 17.09% 1745 97.92% -10.33% 1210 97.53 -19.44%
vc6 Total 58610 - -8.11% 15994 - 0.16% 12586 - -4.77%
Future work may be directed at making these discrepancies smaller, if not eliminating them completely, on the grounds that where there is variation, there is room for improvement...
Results for more recent versions of Tesseract by Tom Morris
All compiled with Apple C compiler Apple LLVM version 7.0.2 (clang-700.1.81) with target x86_64-apple-darwin14.3.0.
Testid Testset Character Word Non-stopword
Errors Acc Change Errors Acc Change Errors Acc Change
3.04.01 bus.3B 8816 97.24% 47.94% 2221 95.68% 36.17% 1629 94.62 25.99%
3.04.01 doe3.3B 48306 96.70% 32.89% 9903 95.36% 26.54% 9020 93.43 28.09%
3.04.01 mag.3B 30860 95.37% 105.15% 7034 93.85% 54.05% 5228 92.25 54.72%
3.04.01 news.3B 19073 96.12% 196.53% 3432 95.92% 76.36% 2685 94.53 78.76%
3.04.01 Total 107055 - 67.84% 22590 - 41.46% 18562 - 40.45%
Testid Testset Character Word Non-stopword
Errors Acc Change Errors Acc Change Errors Acc Change
3.03rc1 bus.3B 8816 97.24% 47.94% 2221 95.68% 36.17% 1629 94.62 25.99%
3.03rc1 doe3.3B 48306 96.70% 32.89% 9903 95.36% 26.54% 9020 93.43 28.09%
3.03rc1 mag.3B 30860 95.37% 105.15% 7034 93.85% 54.05% 5228 92.25 54.72%
3.03rc1 news.3B 19073 96.12% 196.53% 3432 95.92% 76.36% 2685 94.53 78.76%
3.03rc1 Total 107055 - 67.84% 22590 - 41.46% 18562 - 40.45%
Testid Testset Character Word Non-stopword
Errors Acc Change Errors Acc Change Errors Acc Change
3.02.02 bus.3B 6039 98.11% 1.34% 1541 97.01% -5.52% 1240 95.90 -4.10%
3.02.02 doe3.3B 35988 97.54% -0.99% 8482 96.03% 8.38% 7640 94.43 8.49%
3.02.02 mag.3B 14367 97.84% -4.49% 3891 96.60% -14.78% 3024 95.52 -10.51%
3.02.02 news.3B 7148 98.55% 11.13% 1484 98.23% -23.74% 1152 97.65 -23.30%
3.02.02 Total 63542 - -0.38% 15398 - -3.58% 13056 - -1.21%
Testid Testset Character Word Non-stopword
Errors Acc Change Errors Acc Change Errors Acc Change
3.01 bus.3B 22384 93.00% 275.63% 2253 95.62% 38.14% 1863 93.85 44.08%
3.01 doe3.3B 301312 79.41% 728.94% 13924 93.48% 77.92% 11665 91.50 65.65%
3.01 mag.3B 160024 75.98% 963.78% 10698 90.65% 134.30% 7261 89.24 114.89%
3.01 news.3B 43454 91.17% 575.59% 3469 95.87% 78.26% 2380 95.15 58.46%
3.01 Total 527174 - 726.51% 30344 - 90.02% 23169 - 75.31%
Testid Testset Character Word Non-stopword
Errors Acc Change Errors Acc Change Errors Acc Change
2.04 bus.3B 6422 97.99% 7.77% 1750 96.60% 7.30% 1361 95.51 5.26%
2.04 doe3.3B 29514 97.98% -18.80% 7963 96.27% 1.75% 6762 95.07 -3.98%
2.04 mag.3B 14568 97.81% -3.16% 4289 96.25% -6.07% 3053 95.47 -9.65%
2.04 news.3B 7655 98.44% 19.01% 1730 97.94% -11.10% 1208 97.54 -19.57%
2.04 Total 58159 - -8.82% 15732 - -1.48% 12384 - -6.30%
Nick White had forked a repository of the ISRI OCR evaluation tools to make them work easily with UTF-8, and included some helper scripts.
git clone https://ancientgreekocr.org/ocr-evaluation-tools.git
Tools to test OCR accuracy.
Of particular relevance here is the 'tessaccsummary' script, which when given a directory of images and corresponding ground truth text and a .traineddata file will OCR each page and print the accuracy, and an average summary at the end.