scalastyle-config.xml

<!--
  ~ Licensed to the Apache Software Foundation (ASF) under one or more
  ~ contributor license agreements.  See the NOTICE file distributed with
  ~ this work for additional information regarding copyright ownership.
  ~ The ASF licenses this file to You under the Apache License, Version 2.0
  ~ (the "License"); you may not use this file except in compliance with
  ~ the License.  You may obtain a copy of the License at
  ~
  ~    http://www.apache.org/licenses/LICENSE-2.0
  ~
  ~ Unless required by applicable law or agreed to in writing, software
  ~ distributed under the License is distributed on an "AS IS" BASIS,
  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  ~ See the License for the specific language governing permissions and
  ~ limitations under the License.
  -->
<!--

If you wish to turn off checking for a section of code, you can put a comment in the source
before and after the section, with the following syntax:

  // scalastyle:off
  ...  // stuff that breaks the styles
  // scalastyle:on

You can also disable only one rule, by specifying its rule id, as specified in:
  http://www.scalastyle.org/rules-0.7.0.html

  // scalastyle:off no.finalize
  override def finalize(): Unit = ...
  // scalastyle:on no.finalize

This file is divided into 3 sections:
 (1) rules that we enforce.
 (2) rules that we would like to enforce, but haven't cleaned up the codebase to turn on yet
     (or we need to make the scalastyle rule more configurable).
 (3) rules that we don't want to enforce.
-->

<scalastyle>
  <name>Scalastyle standard configuration</name>

  <!-- ================================================================================ -->
  <!--                               rules we enforce                                   -->
  <!-- ================================================================================ -->

  <check level="error" class="org.scalastyle.file.FileTabChecker" enabled="true"></check>

  <check level="error" class="org.scalastyle.file.HeaderMatchesChecker" enabled="true">
    <parameters>
       <parameter name="header"><![CDATA[/*
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The ASF licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */]]></parameter>
    </parameters>
  </check>

  <check level="error" class="org.scalastyle.scalariform.SpacesAfterPlusChecker" enabled="true"></check>

  <check level="error" class="org.scalastyle.scalariform.SpacesBeforePlusChecker" enabled="true"></check>

  <check level="error" class="org.scalastyle.file.WhitespaceEndOfLineChecker" enabled="true"></check>

  <check level="error" class="org.scalastyle.file.FileLineLengthChecker" enabled="true">
    <parameters>
      <parameter name="maxLineLength"><![CDATA[100]]></parameter>
      <parameter name="tabSize"><![CDATA[2]]></parameter>
      <parameter name="ignoreImports">true</parameter>
    </parameters>
  </check>

  <check level="error" class="org.scalastyle.scalariform.ClassNamesChecker" enabled="true">
    <parameters><parameter name="regex"><![CDATA[[A-Z][A-Za-z]*]]></parameter></parameters>
  </check>

  <check level="error" class="org.scalastyle.scalariform.ObjectNamesChecker" enabled="true">
    <parameters><parameter name="regex"><![CDATA[(config|[A-Z][A-Za-z]*)]]></parameter></parameters>
  </check>

  <check level="error" class="org.scalastyle.scalariform.PackageObjectNamesChecker" enabled="true">
    <parameters><parameter name="regex"><![CDATA[^[a-z][A-Za-z]*$]]></parameter></parameters>
  </check>

  <check customId="argcount" level="error" class="org.scalastyle.scalariform.ParameterNumberChecker" enabled="true">
    <parameters><parameter name="maxParameters"><![CDATA[10]]></parameter></parameters>
  </check>

  <check level="error" class="org.scalastyle.scalariform.NoFinalizeChecker" enabled="true"></check>

  <check level="error" class="org.scalastyle.scalariform.CovariantEqualsChecker" enabled="true"></check>

  <check level="error" class="org.scalastyle.scalariform.StructuralTypeChecker" enabled="true"></check>

  <check level="error" class="org.scalastyle.scalariform.UppercaseLChecker" enabled="true"></check>

  <check level="error" class="org.scalastyle.scalariform.IfBraceChecker" enabled="true">
    <parameters>
      <parameter name="singleLineAllowed"><![CDATA[true]]></parameter>
      <parameter name="doubleLineAllowed"><![CDATA[true]]></parameter>
    </parameters>
  </check>

  <check level="error" class="org.scalastyle.scalariform.PublicMethodsHaveTypeChecker" enabled="true"></check>

  <check level="error" class="org.scalastyle.file.NewLineAtEofChecker" enabled="true"></check>

  <check customId="nonascii" level="error" class="org.scalastyle.scalariform.NonASCIICharacterChecker" enabled="true"></check>

  <check level="error" class="org.scalastyle.scalariform.SpaceAfterCommentStartChecker" enabled="true"></check>

  <check level="error" class="org.scalastyle.scalariform.EnsureSingleSpaceBeforeTokenChecker" enabled="true">
   <parameters>
     <parameter name="tokens">ARROW, EQUALS, ELSE, TRY, CATCH, FINALLY, LARROW, RARROW</parameter>
   </parameters>
  </check>

  <check level="error" class="org.scalastyle.scalariform.EnsureSingleSpaceAfterTokenChecker" enabled="true">
    <parameters>
     <parameter name="tokens">ARROW, EQUALS, COMMA, COLON, IF, ELSE, DO, WHILE, FOR, MATCH, TRY, CATCH, FINALLY, LARROW, RARROW</parameter>
    </parameters>
  </check>

  <!-- ??? usually shouldn't be checked into the code base. -->
  <check level="error" class="org.scalastyle.scalariform.NotImplementedErrorUsage" enabled="true"></check>

  <!-- As of SPARK-7558, all tests in Spark should extend o.a.s.SparkFunSuite instead of AnyFunSuite directly -->
  <check customId="funsuite" level="error" class="org.scalastyle.scalariform.TokenChecker" enabled="true">
    <parameters><parameter name="regex">^AnyFunSuite[A-Za-z]*$</parameter></parameters>
    <customMessage>Tests must extend org.apache.spark.SparkFunSuite instead.</customMessage>
  </check>

  <!-- As of SPARK-7977 all printlns need to be wrapped in '// scalastyle:off/on println' -->
  <check customId="println" level="error" class="org.scalastyle.scalariform.TokenChecker" enabled="true">
    <parameters><parameter name="regex">^println$</parameter></parameters>
    <customMessage><![CDATA[Are you sure you want to println? If yes, wrap the code block with
      // scalastyle:off println
      println(...)
      // scalastyle:on println]]></customMessage>
  </check>

  <check customId="hadoopconfiguration" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">spark(.sqlContext)?.sparkContext.hadoopConfiguration</parameter></parameters>
    <customMessage><![CDATA[
      Are you sure that you want to use sparkContext.hadoopConfiguration? In most cases, you should use
      spark.sessionState.newHadoopConf() instead, so that the hadoop configurations specified in Spark session
      configuration will come into effect.
      If you must use sparkContext.hadoopConfiguration, wrap the code block with
      // scalastyle:off hadoopconfiguration
      spark.sparkContext.hadoopConfiguration...
      // scalastyle:on hadoopconfiguration
    ]]></customMessage>
  </check>

  <check customId="visiblefortesting" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">@VisibleForTesting</parameter></parameters>
    <customMessage><![CDATA[
      @VisibleForTesting causes classpath issues. Please note this in the java doc instead (SPARK-11615).
    ]]></customMessage>
  </check>

  <check customId="runtimeaddshutdownhook" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">Runtime\.getRuntime\.addShutdownHook</parameter></parameters>
    <customMessage><![CDATA[
      Are you sure that you want to use Runtime.getRuntime.addShutdownHook? In most cases, you should use
      ShutdownHookManager.addShutdownHook instead.
      If you must use Runtime.getRuntime.addShutdownHook, wrap the code block with
      // scalastyle:off runtimeaddshutdownhook
      Runtime.getRuntime.addShutdownHook(...)
      // scalastyle:on runtimeaddshutdownhook
    ]]></customMessage>
  </check>

  <check customId="mutablesynchronizedbuffer" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">mutable\.SynchronizedBuffer</parameter></parameters>
    <customMessage><![CDATA[
      Are you sure that you want to use mutable.SynchronizedBuffer? In most cases, you should use
      java.util.concurrent.ConcurrentLinkedQueue instead.
      If you must use mutable.SynchronizedBuffer, wrap the code block with
      // scalastyle:off mutablesynchronizedbuffer
      mutable.SynchronizedBuffer[...]
      // scalastyle:on mutablesynchronizedbuffer
    ]]></customMessage>
  </check>

  <check customId="classforname" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">Class\.forName</parameter></parameters>
    <customMessage><![CDATA[
      Are you sure that you want to use Class.forName? In most cases, you should use Utils.classForName instead.
      If you must use Class.forName, wrap the code block with
      // scalastyle:off classforname
      Class.forName(...)
      // scalastyle:on classforname
    ]]></customMessage>
  </check>

  <check customId="awaitresult" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">Await\.result</parameter></parameters>
    <customMessage><![CDATA[
      Are you sure that you want to use Await.result? In most cases, you should use ThreadUtils.awaitResult instead.
      If you must use Await.result, wrap the code block with
      // scalastyle:off awaitresult
      Await.result(...)
      // scalastyle:on awaitresult
    ]]></customMessage>
  </check>

  <check customId="awaitready" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">Await\.ready</parameter></parameters>
    <customMessage><![CDATA[
      Are you sure that you want to use Await.ready? In most cases, you should use ThreadUtils.awaitReady instead.
      If you must use Await.ready, wrap the code block with
      // scalastyle:off awaitready
      Await.ready(...)
      // scalastyle:on awaitready
    ]]></customMessage>
  </check>

  <check customId="parvector" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">new.*ParVector</parameter></parameters>
    <customMessage><![CDATA[
      Are you sure you want to create a ParVector? It will not automatically propagate Spark ThreadLocals or the
      active SparkSession for the submitted tasks. In most cases, you should use ThreadUtils.parmap instead.
      If you must use ParVector, then wrap your creation of the ParVector with
      // scalastyle:off parvector
      ...ParVector...
      // scalastyle:on parvector
    ]]></customMessage>
  </check>

  <check customId="caselocale" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">(\.toUpperCase|\.toLowerCase)(?!(\(|\(Locale.ROOT\)))</parameter></parameters>
    <customMessage><![CDATA[
      Are you sure that you want to use toUpperCase or toLowerCase without the root locale? In most cases, you
      should use toUpperCase(Locale.ROOT) or toLowerCase(Locale.ROOT) instead.
      If you must use toUpperCase or toLowerCase without the root locale, wrap the code block with
      // scalastyle:off caselocale
      .toUpperCase
      .toLowerCase
      // scalastyle:on caselocale
    ]]></customMessage>
  </check>

  <check customId="throwerror" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">throw new \w+Error\(</parameter></parameters>
    <customMessage><![CDATA[
      Are you sure that you want to throw Error? In most cases, you should use appropriate Exception instead.
      If you must throw Error, wrap the code block with
      // scalastyle:off throwerror
      throw new XXXError(...)
      // scalastyle:on throwerror
    ]]></customMessage>
  </check>

  <!-- As of SPARK-45338 JavaConversions should be replaced with CollectionConverters -->
  <check customId="javaconversions" level="error" class="org.scalastyle.scalariform.TokenChecker" enabled="true">
    <parameters><parameter name="regex">JavaConversions</parameter></parameters>
    <customMessage>Instead of importing implicits in scala.collection.JavaConversions._, import
      scala.jdk.CollectionConverters._ and use .asScala / .asJava methods</customMessage>
  </check>

  <!-- As of SPARK-45338 JavaConverters should be replaced with CollectionConverters -->
  <check customId="javaconverters" level="error" class="org.scalastyle.scalariform.TokenChecker" enabled="true">
    <parameters><parameter name="regex">JavaConverters</parameter></parameters>
    <customMessage>Instead of importing implicits in scala.collection.JavaConverters._, import
      scala.jdk.CollectionConverters._ and use .asScala / .asJava methods</customMessage>
  </check>

  <check customId="commonslang2" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">org\.apache\.commons\.lang\.</parameter></parameters>
    <customMessage>Use Commons Lang 3 classes (package org.apache.commons.lang3.*) instead
    of Commons Lang 2 (package org.apache.commons.lang.*)</customMessage>
  </check>

  <check customId="uribuilder" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">UriBuilder\.fromUri</parameter></parameters>
    <customMessage>Use Utils.getUriBuilder instead.</customMessage>
  </check>

  <check customId="executioncontextglobal" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">scala\.concurrent\.ExecutionContext\.Implicits\.global</parameter></parameters>
    <customMessage> User queries can use global thread pool, causing starvation and eventual OOM.
      Thus, Spark-internal APIs should not use this thread pool</customMessage>
  </check>

  <check customId="FileSystemGet" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">FileSystem.get\([a-zA-Z_$][a-zA-Z_$0-9]*\)</parameter></parameters>
    <customMessage><![CDATA[
      Are you sure that you want to use "FileSystem.get(Configuration conf)"? If the input
      configuration is not set properly, a default FileSystem instance will be returned. It can
      lead to errors when you deal with multiple file systems. Please consider using
      "FileSystem.get(URI uri, Configuration conf)" or "Path.getFileSystem(Configuration conf)" instead.
      If you must use the method "FileSystem.get(Configuration conf)", wrap the code block with
      // scalastyle:off FileSystemGet
      FileSystem.get(...)
      // scalastyle:on FileSystemGet
    ]]></customMessage>
  </check>

  <check customId="extractopt" level="error" class="org.scalastyle.scalariform.TokenChecker" enabled="true">
    <parameters><parameter name="regex">extractOpt</parameter></parameters>
    <customMessage>Use jsonOption(x).map(.extract[T]) instead of .extractOpt[T], as the latter
    is slower.  </customMessage>
  </check>

  <check level="error" class="org.scalastyle.scalariform.ImportOrderChecker" enabled="true">
    <parameters>
      <parameter name="groups">java,scala,3rdParty,spark</parameter>
      <parameter name="group.java">javax?\..*</parameter>
      <parameter name="group.scala">scala\..*</parameter>
      <parameter name="group.3rdParty">(?!(javax?\.|scala\.|org\.apache\.spark\.)).*</parameter>
      <parameter name="group.spark">org\.apache\.spark\..*</parameter>
    </parameters>
  </check>

  <check level="error" class="org.scalastyle.scalariform.DisallowSpaceBeforeTokenChecker" enabled="true">
    <parameters>
      <parameter name="tokens">COMMA</parameter>
    </parameters>
  </check>

  <!-- SPARK-3854: Single Space between ')' and '{' -->
  <check customId="SingleSpaceBetweenRParenAndLCurlyBrace" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">\)\{</parameter></parameters>
    <customMessage><![CDATA[
      Single Space between ')' and `{`.
    ]]></customMessage>
  </check>

  <check customId="NoScalaDoc" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">(?m)^(\s*)/[*][*].*$(\r|)\n^\1  [*]</parameter></parameters>
    <customMessage>Use Javadoc style indentation for multiline comments</customMessage>
  </check>

  <check customId="OmitBracesInCase" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">case[^\n>]*=>\s*\{</parameter></parameters>
    <customMessage>Omit braces in case clauses.</customMessage>
  </check>

  <check level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">new (java\.lang\.)?(Byte|Integer|Long|Short)\(</parameter></parameters>
    <customMessage>Use static factory 'valueOf' or 'parseXXX' instead of the deprecated constructors.</customMessage>
  </check>

  <!-- SPARK-16877: Avoid Java annotations -->
  <check level="error" class="org.scalastyle.scalariform.OverrideJavaChecker" enabled="true"></check>

  <check level="error" class="org.scalastyle.scalariform.DeprecatedJavaChecker" enabled="true"></check>

  <check level="error" class="org.scalastyle.scalariform.IllegalImportsChecker" enabled="true">
    <parameters><parameter name="illegalImports"><![CDATA[scala.collection.Seq,scala.collection.IndexedSeq]]></parameter></parameters>
    <customMessage><![CDATA[
      Don't import scala.collection.Seq and scala.collection.IndexedSeq as it may bring some problems with cross-build between Scala 2.12 and 2.13.

      Please refer below page to see the details of changes around Seq / IndexedSeq.
      https://docs.scala-lang.org/overviews/core/collections-migration-213.html

      If you really need to use scala.collection.Seq or scala.collection.IndexedSeq, please use the fully-qualified name instead.
    ]]></customMessage>
  </check>

  <check level="error" class="org.scalastyle.scalariform.IllegalImportsChecker" enabled="true">
    <parameters><parameter name="illegalImports"><![CDATA[collection]]></parameter></parameters>
    <customMessage>Please use scala.collection instead.</customMessage>
  </check>

  <check level="error" class="org.scalastyle.scalariform.IllegalImportsChecker" enabled="true">
    <parameters><parameter name="illegalImports"><![CDATA[org.apache.log4j]]></parameter></parameters>
    <customMessage>Please use Apache Log4j 2 instead.</customMessage>
  </check>


  <!-- ================================================================================ -->
  <!--       rules we'd like to enforce, but haven't cleaned up the codebase yet        -->
  <!-- ================================================================================ -->

  <!-- We cannot turn the following two on, because it'd fail a lot of string interpolation use cases. -->
  <!-- Ideally the following two rules should be configurable to rule out string interpolation. -->
  <check level="error" class="org.scalastyle.scalariform.NoWhitespaceBeforeLeftBracketChecker" enabled="false"></check>
  <check level="error" class="org.scalastyle.scalariform.NoWhitespaceAfterLeftBracketChecker" enabled="false"></check>

  <!-- This breaks symbolic method names so we don't turn it on. -->
  <!-- Maybe we should update it to allow basic symbolic names, and then we are good to go. -->
  <check level="error" class="org.scalastyle.scalariform.MethodNamesChecker" enabled="false">
    <parameters>
    <parameter name="regex"><![CDATA[^[a-z][A-Za-z0-9]*$]]></parameter>
    </parameters>
  </check>

  <!-- Should turn this on, but we have a few places that need to be fixed first -->
  <check level="error" class="org.scalastyle.scalariform.EqualsHashCodeChecker" enabled="true"></check>

  <!-- ================================================================================ -->
  <!--                               rules we don't want                                -->
  <!-- ================================================================================ -->

  <check level="error" class="org.scalastyle.scalariform.IllegalImportsChecker" enabled="false">
    <parameters><parameter name="illegalImports"><![CDATA[sun._,java.awt._]]></parameter></parameters>
  </check>

  <!-- We want the opposite of this: NewLineAtEofChecker -->
  <check level="error" class="org.scalastyle.file.NoNewLineAtEofChecker" enabled="false"></check>

  <!-- This one complains about all kinds of random things. Disable. -->
  <check level="error" class="org.scalastyle.scalariform.SimplifyBooleanExpressionChecker" enabled="false"></check>

  <!-- We use return quite a bit for control flows and guards -->
  <check level="error" class="org.scalastyle.scalariform.ReturnChecker" enabled="false"></check>

  <!-- We use null a lot in low level code and to interface with 3rd party code -->
  <check level="error" class="org.scalastyle.scalariform.NullChecker" enabled="false"></check>

  <!-- Doesn't seem super big deal here ... -->
  <check level="error" class="org.scalastyle.scalariform.NoCloneChecker" enabled="false"></check>

  <!-- Doesn't seem super big deal here ... -->
  <check level="error" class="org.scalastyle.file.FileLengthChecker" enabled="false">
    <parameters><parameter name="maxFileLength">800></parameter></parameters>
  </check>

  <!-- Doesn't seem super big deal here ... -->
  <check level="error" class="org.scalastyle.scalariform.NumberOfTypesChecker" enabled="false">
    <parameters><parameter name="maxTypes">30</parameter></parameters>
  </check>

  <!-- Doesn't seem super big deal here ... -->
  <check level="error" class="org.scalastyle.scalariform.CyclomaticComplexityChecker" enabled="false">
    <parameters><parameter name="maximum">10</parameter></parameters>
  </check>

  <!-- Doesn't seem super big deal here ... -->
  <check level="error" class="org.scalastyle.scalariform.MethodLengthChecker" enabled="false">
    <parameters><parameter name="maxLength">50</parameter></parameters>
  </check>

  <!-- Not exactly feasible to enforce this right now. -->
  <!-- It is also infrequent that somebody introduces a new class with a lot of methods. -->
  <check level="error" class="org.scalastyle.scalariform.NumberOfMethodsInTypeChecker" enabled="false">
    <parameters><parameter name="maxMethods"><![CDATA[30]]></parameter></parameters>
  </check>

  <!-- Doesn't seem super big deal here, and we have a lot of magic numbers ... -->
  <check level="error" class="org.scalastyle.scalariform.MagicNumberChecker" enabled="false">
    <parameters><parameter name="ignore">-1,0,1,2,3</parameter></parameters>
  </check>

  <check customId="GuavaToStringHelper" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">Objects.toStringHelper</parameter></parameters>
    <customMessage>Avoid using Object.toStringHelper. Use ToStringBuilder instead.</customMessage>
  </check>

  <check customId="GuavaFilesCreateTempDir" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">Files\.createTempDir\(</parameter></parameters>
    <customMessage>Avoid using com.google.common.io.Files.createTempDir due to CVE-2020-8908.
      Use org.apache.spark.util.Utils.createTempDir instead.
    </customMessage>
  </check>

  <check customId="GuavaFileBackedOutputStream" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">FileBackedOutputStream</parameter></parameters>
    <customMessage>Avoid using FileBackedOutputStream due to CVE-2023-2976.</customMessage>
  </check>

  <check customId="GuavaAtomicDoubleArray" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">AtomicDoubleArray</parameter></parameters>
    <customMessage>Avoid using AtomicDoubleArray due to CVE-2018-10237.</customMessage>
  </check>

  <check customId="GuavaCompoundOrdering" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">CompoundOrdering</parameter></parameters>
    <customMessage>Avoid using CompoundOrdering due to CVE-2018-10237.</customMessage>
  </check>

  <check customId="byteCountToDisplaySize" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">byteCountToDisplaySize</parameter></parameters>
    <customMessage>Use Utils.bytesToString instead of byteCountToDisplaySize for consistency.</customMessage>
  </check>

  <check customId="pathfromuri" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
    <parameters><parameter name="regex">new Path\(new URI\(</parameter></parameters>
    <customMessage><![CDATA[
      Are you sure that this string is uri encoded? Please be careful when converting hadoop Paths
      and URIs to and from String. If possible, please use SparkPath.
    ]]></customMessage>
  </check>
</scalastyle>